H
heisen
- 2,626
- 263
Gonna start this comparison in 10 days and wanna gather input and suggestions before i kick it off.The last comparison was with 2 315 CMH vs 700 watts of cobs dimmed and now i wanna run the 1000 vs the whole 800 of COBS
Strains will be 6 Gorilla Glue #4 clones on one side and the other side will be 6 J beezy wedding cakes.
12 bucket RDWC in a controlled sealed room running 2 ton mini and Co2.
The Nanolux CMH was on back order and they finally got the shipment in and ill have my hands on it wednesday.I ordered 2 but will only be using 1 for this comparison.
They come with a reflector for 5x5 footprint but i also have a raptor i can use and just use the remote ballast wired to the raptor.Suggestions are welcome on anything you guys want to see done on this comparison.Ill check the footprint on the stock nanolux and see how it looks over a 4x5.I want to be as fair in this comparison as possible.
Cob setup is 15 Bridgelux vero 29 D 3000K (80 CRI)on 3 240-1400mA drivers.The cobs are 38.7 volts multiplied by 1.4 amps giving me 814 watts total.Everything is wired to 220V.Everything is wired and built on the cobs ready to go,All the parts i got from RapidLED to build the setups.
All the clones are under CMH now but will be under 1200 watts of 5000k cobs tommorrow in big buckets.As soon as they all get size to flower they will go in the flower room where i will start the comparisons.
Ill be looking at all aspects including final weight to see if the extra 200 watts of CMH was worth the difference in yield.
The contenders in totes right now.GG in the front tote and WC in back tote.In the comparison i will run them 6 on each side giving 3 of each under each separate light.
The COB setup to cover a 4x5
And the nanolux fixture ill be using.
Any suggestions before it starts or something you guys would like to see im all ears.
Strains will be 6 Gorilla Glue #4 clones on one side and the other side will be 6 J beezy wedding cakes.
12 bucket RDWC in a controlled sealed room running 2 ton mini and Co2.
The Nanolux CMH was on back order and they finally got the shipment in and ill have my hands on it wednesday.I ordered 2 but will only be using 1 for this comparison.
They come with a reflector for 5x5 footprint but i also have a raptor i can use and just use the remote ballast wired to the raptor.Suggestions are welcome on anything you guys want to see done on this comparison.Ill check the footprint on the stock nanolux and see how it looks over a 4x5.I want to be as fair in this comparison as possible.
Cob setup is 15 Bridgelux vero 29 D 3000K (80 CRI)on 3 240-1400mA drivers.The cobs are 38.7 volts multiplied by 1.4 amps giving me 814 watts total.Everything is wired to 220V.Everything is wired and built on the cobs ready to go,All the parts i got from RapidLED to build the setups.
All the clones are under CMH now but will be under 1200 watts of 5000k cobs tommorrow in big buckets.As soon as they all get size to flower they will go in the flower room where i will start the comparisons.
Ill be looking at all aspects including final weight to see if the extra 200 watts of CMH was worth the difference in yield.
The contenders in totes right now.GG in the front tote and WC in back tote.In the comparison i will run them 6 on each side giving 3 of each under each separate light.
The COB setup to cover a 4x5
And the nanolux fixture ill be using.
Any suggestions before it starts or something you guys would like to see im all ears.