Resource icon

Glether's Easy NFT System

Glether's Easy NFT (Nutrient Film Technique) is a straightforward hydroponic system that can be constructed using readily available materials from home improvement stores. This system is designed to accommodate up to 60 plants and is highly efficient in delivering nutrients and water to the plants. In this article, we will explain the components and construction of this system, as well as some tips for maintaining it.

Materials and Construction:

  1. Vinyl gutters: You will need four 10-foot long vinyl gutters. These will be run parallel to each other, with a 2-inch drop over the length to facilitate water flow.
  2. Drip lines: Four drip lines will feed the gutters, providing water and nutrients to the plants.
  3. Reservoir: A 25-gallon reservoir is required to hold the water and nutrient solution. It is essential to use lightproof covered gutters and reservoirs to prevent algae growth.
  4. Growing medium: The plants will be grown in 3-inch rockwool cubes placed directly into the gutters.
  5. Gutter covers: To avoid algae problems and root illumination issues, it is recommended to use covered gutters. Gutter covers can be found at most home improvement stores.
  6. Water pump: A Little Giant NK1 210gph water pump will be used to circulate the nutrient solution.
  7. Aeration: A whisper 400 air pump and air stone will be used to aerate the reservoir.
  8. Lighting: Glether uses multiple 430-watt Diamond lights, which have proven to yield impressive harvests.
Assembly and Setup:

  1. Arrange the four vinyl gutters parallel to each other, ensuring a 2-inch drop over their 10-foot length.
  2. Install the drip lines at the top of the gutters, allowing water to flow back into the reservoir.
  3. Place the rockwool cubes directly into the gutters.
  4. Add gutter covers to prevent algae growth and protect roots from light exposure.
  5. Connect the water pump to the drip lines and reservoir.
  6. Install the air pump and air stone in the reservoir to provide aeration.
  7. Set up the lights above the gutters, adjusting them to the appropriate height for your plants.
Maintenance Tips:

  1. Regularly check and clean the drip lines to prevent clogging. Compressed air can be used to clear any blockages.
  2. Monitor the nutrient levels in the reservoir and adjust as needed.
  3. Keep the gutters and reservoir covered to prevent algae growth.
Conclusion:

Glether's Easy NFT is a simple and effective hydroponic system that can be constructed using materials from your local home improvement store. With proper maintenance and care, this system can yield impressive harvests, making it an ideal choice for those looking to explore hydroponic gardening.
Author
logic
Views
862
First release
Last update
Rating
0.00 star(s) 0 ratings

More resources from logic

Top Bottom