/ Register

Contact Us
Want to advertise here? Contact us today to begin

First Grow In New Room And It's All Wedding Cake

Discussion in 'Grow Diaries' started by Task, Dec 2, 2018.

Page 1 of 3
  1. Dec 2, 2018 #1
    Task

    Task

    28
    49
    13
    Hey guys Task here. Decided to start a diary on my 2400 watt sealed room! I am in the first week of flower but will also add the info and pics from veg. Started with 56 cuts now have 47 plants (lost 9 but was planned for and expected). They are top fed with Flora flex, Co2 enriched, and has a Reverse Osmosis System. I'm using the full New Millennium Nutrient line with Cali-Magic, ArmorSi and Fish Head Farms Fish Sh!t . Water at 5.5-5.8 and 66-68°F. Room ambient temperature is 75°F while under the lights it's 80°F. Co2 is set at 1500 ppm currently and lights are around 18 inches away. My rooms A/C is a 240v 2 ton window unit that I wired a 120v relay trigger. I built this whole room myself all the way from studs, It used to be a storage closet. I insulated the walls with r15 rock wool and the ceiling with r30. dry walled everything with pink board and insted of drywall tape used expanding foam, Its SEALED. I made some changes in veg as you'll see in the photos. I'm still trying to dial in the drip system, i have a leader 1hp pump with flow control and pressure regulator. i cant seem to get the octabubblers to work right I think I may have designed the manifold wrong it's my first grow with one so any advise is appreciated. But anyways I'll stop for now and add some pics thanks guys.
     
    20180925_142625.jpg
    20181012_142951.jpg
    20181015_194129.jpg
    20181031_194012.jpg
    20181102_181314.jpg
    20181106_083240.jpg
    20181106_083515.jpg
    20181106_083538.jpg
    20181108_212616.jpg
    20181111_214631.jpg
    20181114_224836.jpg
    20181117_200607.jpg
    20181120_234001.jpg
    20181121_205631.jpg
    20181121_222501.jpg
    20181125_194644.jpg
    20181126_012652.jpg
    20181127_022442.jpg
    Farmer P, HelixFertili, PharmHand and 5 others like this.
  2. Dec 2, 2018 #2
    Task

    Task

    28
    49
    13
    #
     
    Farmer P and HelixFertili like this.
  3. Dec 2, 2018 #3
    Task

    Task

    28
    49
    13
    Here is a video of the trellis almost done 1 day before flip.

    Picture is day 3 after flip which is 2 days ago I'll get currents up tonight.!
     
    HD Camera1_113018_235311.jpg
    Last edited: Dec 2, 2018
    Farmer P, TerpyTyrone and London bud like this.
  4. Dec 2, 2018 #4
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    I literally have a full room of Wedding Cake that I'm running for the first time as well. After reading your OP, I saw you were having issues with the bubblers. What exactly are you dealing with. All my indoor test rooms are 1" PVC runs to Floraflex bubblers feeding my tables so I've definitely spent quite a few hours troubleshooting and hunting down gremlins. Feel free to drop me a message or run anything by me if you're still dealing with issues. Could be something as simple as your inline filter
     
    Farmer P, TerpyTyrone and Task like this.
  5. Dec 2, 2018 #5
    Task

    Task

    28
    49
    13
    Im getting super uneven flow overall it would help a ton if you could explain how you set up your manifold I think might have messed up from the start cause I'm running 3/4 inch out unless that wouldn't matter. I have 6 bubbles inline all my runs are cut the same length which might be a bit long of 6ft cause that's my longest run due to how I set up the manifold so I might need to change that maybe the height. I'm not 100% sure, I can post some pics when lights flip. ***edit*** Actually here's some ***
     
    Farmer P likes this.
  6. Dec 2, 2018 #6
    Task

    Task

    28
    49
    13
    This is before I made all the lines the same length.
     
    20181129_085641.jpg
    20181129_085631.jpg
    20181129_085604.jpg
    20181129_085621.jpg
    Farmer P and HelixFertili like this.
  7. Dec 2, 2018 #7
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    So, when I get into work tomorrow I'll take some pics of how I run my stuff and give you a bit of a breakdown as to how I try to ensure equal pressure. I'm not seeing any in-line filters. Even if you're using nothing but sterile, mineral based nutrients you can still get bio accumulation in your lines that can interrupt your feedings. A 1 hp in-line leader pump should be more than enough to keep adequate pressure for how many drops you have
     
    Farmer P, Erick31876 and Task like this.
  8. Dec 2, 2018 #8
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    Why do you have all the valves closed?
     
  9. Dec 2, 2018 #9
    Task

    Task

    28
    49
    13
    That'd be awesome! I'm getting a filter for sure it just hasn't came yet, should be here in a day. I figured the pump would be, do you think I should plumb into the res from the bottom insted of the top? Also all lines are split at the pot in order to have 2 emitters at each. Thanks alot for the help
     
  10. Dec 2, 2018 #10
    Task

    Task

    28
    49
    13
    This was right after I primed the pump so it was straight ro water
     
  11. Dec 2, 2018 #11
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    Your pump will definitely draw more easily if you plumb it into your reservoir through the bottom using the shortest amount of pipe possible
     
    Task likes this.
  12. Dec 2, 2018 #12
    Task

    Task

    28
    49
    13
    I'll take care of that asap in that case
     
  13. Dec 2, 2018 #13
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    Even in my small test room in my basement this is how I run my pump. Put a T w/ a ball valve up top on the output so I can dump the entire reservoir with the quickness if I need to. Sorry about the mess, that room has been out of action for 6 months. Haven't had time to use it how I've wanted to it's been empty 20181202_230129.jpg
     
    20181202_230205.jpg
    Farmer P likes this.
  14. Dec 2, 2018 #14
    Task

    Task

    28
    49
    13
    Yeah thats the better way i just need to grab the fittings. I really want to get a chemtainer in the future that's pre-plumed.
     
  15. Dec 2, 2018 #15
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    It's really the best way to go and then just plumb it to fit. Some FIP reducers and PVC glue and you're all set
     
    Task likes this.
  16. Dec 2, 2018 #16
    Trustfall

    Trustfall

    149
    366
    63
    Good work with the new mellinium. Can’t be beat in veg and early flower imo.
    And your right, definitely need to flip those ASAP.
    Every round I start them a little smaller and it’s still to much.
     
  17. Dec 2, 2018 #17
    Trustfall

    Trustfall

    149
    366
    63
    DTG can you reccoment a pump that would push 4 bubblers at once?
    I got a setup like tasks for my resivour but am almost ready to get some chemtainers so I can online the pvc from the bottom.
    Right now I’m using a shurflo ever pump.
     
  18. Dec 2, 2018 #18
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    Bubblers as in air diffusers? Where are you running these diffusers, in the pots that you're growing the plants or in your nutrient reservoir? I would highly recommend staying away from pumping oxygen into your nutrient reservoirs. What you want to do to keep them thoroughly mixed is put your res on a chiller and run a pump to keep the solution in constant motion
     
    greencraft and Task like this.
  19. Dec 3, 2018 #19
    DetGrnThumb

    DetGrnThumb

    256
    552
    93
    I'll put my Elite lineup against anything on the market any day of the week
     
    Trustfall likes this.
  20. Dec 3, 2018 #20
    Trustfall

    Trustfall

    149
    366
    63
    Sorry I meant the distributors I’m high lol. My shurflo pump will do 2 (16 lines) just right but I would rather run all four trays at the same time instead of using sprinkler manifolds
     

You need to be logged in to reply
Register

Page 1 of 3