Peppersmints
Supporter
- 143
- 43
So, I’m with the Nutri+ line. Not really pushing it to their PPM guide, I like keeping it below 1300 to not over feed. I flush my water about every 3week to 1 month, i use beneficial bacteria ( forgot the name right now) I have a Wyze cam plugged to the timer so it’s not on at night ( stupid blue led when it’s on, and the night mode use infrared so big no.) it’s setted on a home made pvc table / 4x4. I do a little LST, and defoliation, trying to save some space but I have 8 foot high. Loosing about 20inch with the table. The light are about 24 inch and using 2x 3000watt philzon Cree Cob light. Here legal limit is 4. So I have 4 different genetic.. Bubble gum, cream and cheese cbd , monster gelato and lemon haze silver Og ( not sure of the name right now , it was a gift seed lol) and I mixed up my 3D printed stick so I’m not sure witch is witch right now... but got a good idea. I use clay pebble ( rockwool cube to start them up in a grow tents separate at first ) they are curently flowering 3 week 1/2 , dripping system is set at little under 4min on every a little under 4hours. Temp I’ve seen on close up today was 26,7 with a humidity of 62%. The incoming air is around 45% so i am not much afraid of too much moisture, pretty sure at night it lower with the temp going down to 17~. I have a wall fan 24h7 on. I have around 300cfm inline extract fan that is set to run 3min and stop 3min. Temp is getting colder so I will adjust with the winter coming. It’s in the basement but the reservoir is lifted from the ground on a little wheel cart, reservoir temp is around 17. The picture are dated to see the progress. I have one that is really smaller then the other. Been a while I wanted to post, if I can help anyone or if anyone has tip for myself I think most of people around seem nice and genuine enough to share good knowledge. Keep it up and I will upload more photo soon :)