PK Monster Closet | Deep water culture (dwc) | Gorilla Glue

  • Thread starter PK1
  • Start date
  • Tagged users None
PK1

PK1

Supporter
3,459
263
Here is a quick update on the gorilla glue in promix hp.
I have topped and transplanted her into a 5 gallon cotton pot. I've watered the side of the soil and cotton pot to the dripping point. In the video I show how the side of the soil is lower than were the main stem of the plant is. I won't be watering the center much as I want the massive roots that was build up in the half cup to start stretching out and down. I did splash a bit of water in the middle just so that the soil from the cup and the soil from the 5 gallon pot can absorb each other. Currently she is a bit shocked from the topping, but she should be good to go in couple days and loving her new living space.

 
PK1

PK1

Supporter
3,459
263
Well this seedling isn't dead yet so we'll let it run but i am out of ideas what to do? Maybe throw it in the tent and bring the light intensity down? idk, let me know what you would do?
2021 01 10 205447


do you think this is a iron or zinc deficiency or am i just tripping?
12 gallon of water MC 7.5 grams of part a and 12.5grams of part B
2021 01 10 205434

2021 01 10 205439
2021 01 10 205443



Here is a picture of the Gorilla Glue that is now in the 5 gallon cotton pots. The spider mites problem has been resolved.
2021 01 10 205500

1 gallon challenge
2021 01 10 205521
 
Aqua Man

Aqua Man

26,480
638
They look well fed i wouldn't increase but thats just me.... 500-600 is about the sweet spot for me but not all systems are the same.
 
  • Like
Reactions: PK1
PK1

PK1

Supporter
3,459
263
the canopy is starting up and i still haven't found a way to create a scrog net on the black lid.
I am thinking that the scrog net needs to move with the black lid so it doesn't damage the plant.
Currently the plant is in 3rd week of veg

by the way, i have to spray the inside of the closet with water just so i can get my humidity up. other whys i got a humidity of 20%

@tobh so just for experiment i removed the plastic reflective sheet and the temp of the water went to high as 25c.
with the reflective i am sitting at 22.9c. I do throw a 2l pup bottle that is iced up and that reduce it to 18c for an hour before the ice is melted in the bottle and the temps go back up. lol!
 
2021 01 11 143425
2021 01 11 143418
2021 01 11 143411
2021 01 11 143212
2021 01 11 143209
2021 01 11 143204
2021 01 11 143145
PK1

PK1

Supporter
3,459
263
@Aqua Man can we move this thread to hydroponic dwc instead of diary. I am kinda surprised i've got no traffic or attention here. lol!
 
PK1

PK1

Supporter
3,459
263
@Aqua Man you mentioned you also use two part mega crop. What have you found to be the best schedule? Currently on the calculator i am following 5 gallon of water which says to do 7.5 part A and 12.5 part B. This gives me a ppm of 800. The tote takes 12.5 gallon of water and it will be exactly below the pot net. With the additional 7.5 gallon of water brings my ppm to 600ish.

Just wondering how many grams of what do you put in your feeding?
currently have dark green leaves and no tip burns yet.
 
Aqua Man

Aqua Man

26,480
638
@Aqua Man you mentioned you also use two part mega crop. What have you found to be the best schedule? Currently on the calculator i am following 5 gallon of water which says to do 7.5 part A and 12.5 part B. This gives me a ppm of 800. The tote takes 12.5 gallon of water and it will be exactly below the pot net. With the additional 7.5 gallon of water brings my ppm to 600ish.

Just wondering how many grams of what do you put in your feeding?
currently have dark green leaves and no tip burns yet.
I dont go further than the transition ratio. Always keeping my nitrogen between 100-120ppm. Im feeding about 800ppm but with co2 I need to feed a bit higher. Because I use tap i add 1 gram of mag sulfate at the end.

Its really goes based on the response I het from the plants but keeping between a bit more part b and equal i find works well.
 
  • Like
Reactions: PK1
PK1

PK1

Supporter
3,459
263
I dont go further than the transition ratio. Always keeping my nitrogen between 100-120ppm. Im feeding about 800ppm but with co2 I need to feed a bit higher. Because I use tap i add 1 gram of mag sulfate at the end.

Its really goes based on the response I het from the plants but keeping between a bit more part b and equal i find works well.
Part A is 5-12-26
Part B is 15-5-0

i was thinking since part B is mostly nitrogen that i should drop it from 12.5grams
 
Aqua Man

Aqua Man

26,480
638
Just depends on the stage of growth. I have 3 different strains right now so finding a happy medium is what I'm doing. Without co2 probably something like this but it really depends on the grow and strain.

Seedling 100-200
Early veg 200-300
Mid veg 400-500
Late veg to late flower 500-600

Again not hard numbers but just a rough guess.
 
  • Like
Reactions: PK1

Latest posts

Top Bottom