Ph 007
- 988
- 93
I'm trying to figure out the ideal air temp for grow tent using t5 lights
I use to run 78-80 canopy level but u think that was a tad hight
Now Im shading my fan probe and thermometer at canopy level pics below and I have my fan set to 25c=77f room stays at day 75-77 amd night 70-72f,
Does anyone know if I should be running ther room higher, if I un-shaded my thermometer the lihht adds about 1° so now the 77f says 78f , and fan still set at 25c=77f
my rent it just 90cm high and it's 130cm long , 60cm wide
Or should I be taking the air temperature at the floor.
I have a fan moving air about the tent so probs that are shaded should be feeling the room air
Any does anybody know the best temp for coco & clone machine water temp
I read so many different things more to fused now that I was before I stated reading lol I read 18-20c 22max
and I read 20-25c
Also what about putting a soil tempreture probe in the coco I get a reading 20-21c it was 18-20 but I upper the water temp to have a try at different temp.
Should the water tempreture be the same for all water, I mean like 18-20c
for soil , coco , and hydrophonic?
Help a brother out
any help welcome lol
So I'm doing this now shaded by that shelve, and fan probe is just going thwt white thermometer the fan is set to 25c so kicks in at 77f drops back to about 75f and repeats outter room air temp is 68-70 it's cold here at moment
I got my idel on just 5% it's a 4" extractor , the idel was off for a few days but I noticed 2 of my clones in the clonner got some what I think is mold on the odd leaf and stem, so must be luck of fresh air air exchange at night as fan does not kick in at night and idel was off so only got air change lights on
I use to run 78-80 canopy level but u think that was a tad hight
Now Im shading my fan probe and thermometer at canopy level pics below and I have my fan set to 25c=77f room stays at day 75-77 amd night 70-72f,
Does anyone know if I should be running ther room higher, if I un-shaded my thermometer the lihht adds about 1° so now the 77f says 78f , and fan still set at 25c=77f
my rent it just 90cm high and it's 130cm long , 60cm wide
Or should I be taking the air temperature at the floor.
I have a fan moving air about the tent so probs that are shaded should be feeling the room air
Any does anybody know the best temp for coco & clone machine water temp
I read so many different things more to fused now that I was before I stated reading lol I read 18-20c 22max
and I read 20-25c
Also what about putting a soil tempreture probe in the coco I get a reading 20-21c it was 18-20 but I upper the water temp to have a try at different temp.
Should the water tempreture be the same for all water, I mean like 18-20c
for soil , coco , and hydrophonic?
Help a brother out
any help welcome lol
So I'm doing this now shaded by that shelve, and fan probe is just going thwt white thermometer the fan is set to 25c so kicks in at 77f drops back to about 75f and repeats outter room air temp is 68-70 it's cold here at moment
I got my idel on just 5% it's a 4" extractor , the idel was off for a few days but I noticed 2 of my clones in the clonner got some what I think is mold on the odd leaf and stem, so must be luck of fresh air air exchange at night as fan does not kick in at night and idel was off so only got air change lights on