Create the perfect environment for your plant clones with this stealthy clone grow box. This guide will walk you through the steps to assemble a self-watering, well-lit, and air-circulated grow box that allows you to leave your clones unattended for extended periods.
Introduction
The stealth box is designed with a large plastic toolbox as its base, providing space for approximately 30 clones in jiffy pots. It is essential to use a non-recycled plastic toolbox, as recycled plastic can release chemicals that harm the plants. Note that some light may be visible through the lid opening.Assembling the Stealth Box
Required Materials
- 1 large (hinged) plastic toolbox (non-recycled plastic)
- 1 2ft double fluorescent light (with self-contained ballast)
- 1 2m length of 1.5mm 3 core cable
- 1 13a male plug with a 5amp fuse fitted
- 1 TRS gland (a rubber grommet to hold the cable)
Assembly Process
- Remove the lid from the toolbox.
- Place the fluorescent light fixture in the center of the overturned lid, and mark its outline.
- Cut any plastic ridges the fixture touches to allow it to countersink into the lid.
- Secure the fixture to the lid using bolts or superglue.
- Drill a 20mm hole in one end of the box lid for the power cable inlet.
- Fit the TRS gland into the hole, and slide the power cable through the gland into the light fixture.
Wiring the Ballast and Plug
Wiring Process
- Strip the ends of the cable.
- Connect the Red/Brown wire to the "L" marked terminal on the ballast.
- Connect the Blue/Black wire to the "N" marked terminal.
- Connect the Green/Yellow wire to the "E" marked terminal.
- Wire up a male plug onto the other end of the power cord, matching the colors to the appropriate terminals.
Using the Stealth Box
Operation Instructions
- Place clones in jiffy pots inside the box and water the soil.
- Turn on the light and close the box.
Important Tips
- Check the clones only once a day to maintain the desired environment.
- The fluorescent light creates a convection that warms the air, drawing fresh cool air through the lid opening.
- Humidity averages between 54% - 68%, and the temperature is around 74°F, depending on external conditions.