Diy thc vape juice using base liquids.

  • Thread starter Darrell.1979
  • Start date
  • Tagged users None
juliando

juliando

41
18
Soaking for 25 days or so on a dark-ish shelf. Tried some this morning and Im impressed - good flavor and strength so far.
I didnt add any other flavors but the Vg is sweet and the weed smell is already strong.
Decent high - little kick to the sinuses, but not super strong yet.
Ive heard its supposed to soak for 60 days so I hope it will continue to improve.

Could you imagine how much this much this would cost at a dispensary? This is more than 200 cartridges, crazy.

20241110 101705
 
katraiter

katraiter

817
143
Yeah I'm gonna have to try that. I went to a festival and got some distillate , guy told me how to mix into my vape / e- juice 💚 I was like , no shit really. Hell yes sign me up🤣 But this way your doing would be better on my coils ! Loves it!! I vape ALot so to mix the two is double great!
 
katraiter

katraiter

817
143
Soaking for 25 days or so on a dark-ish shelf. Tried some this morning and Im impressed - good flavor and strength so far.
I didnt add any other flavors but the Vg is sweet and the weed smell is already strong.
Decent high - little kick to the sinuses, but not super strong yet.
Ive heard its supposed to soak for 60 days so I hope it will continue to improve.

Could you imagine how much this much this would cost at a dispensary? This is more than 200 cartridges, crazy.

View attachment 2319962
Did you decarb it first? is the standard 240 for like 40 minutes adequate ? Or is there a different method of decarb for this infusion?
 
juliando

juliando

41
18
Did you decarb it first? is the standard 240 for like 40 minutes adequate ? Or is there a different method of decarb for this infusion?
This time I decarbed in the oven first - I chose 20-25 minutes at 225. On the low end because terpenes burn off first at lower temps and I seem to lose alot of flavor. Last time I did the fast way - steamed the jar with juice and flower for 30 minutes.
 
Newty

Newty

15% Off Fast Buds Orders, Code: NEWTY42
Supporter
2,054
263
I've been looking at making vape juice since I bought a press and making solventless rosin.

With decarbed rosin it's pretty easy, just add some vg/pg and flavor if you want and you're done.

Other option for rosin is Wax Liquidizor, just mix with decarbed rosin and your done.

No idea you could do it by the method used in this thread, pretty neat!
 
jadins_journey

jadins_journey

Supporter
1,750
263
I've been looking at making vape juice since I bought a press and making solventless rosin.

With decarbed rosin it's pretty easy, just add some vg/pg and flavor if you want and you're done.

Other option for rosin is Wax Liquidizor, just mix with decarbed rosin and your done.

No idea you could do it by the method used in this thread, pretty neat!
That’s how I make my vape carts. Super easy and takes about 15 minutes. Gram per ml of Terps and your rocking
 
LoveGrowingIt

LoveGrowingIt

Supporter
3,228
263
What is "vg"? I searched the thread and couldn't find it explained anywhere. It's probably there somewhere. I just couldn't find it.
 
katraiter

katraiter

817
143
I've been looking at making vape juice since I bought a press and making solventless rosin.

With decarbed rosin it's pretty easy, just add some vg/pg and flavor if you want and you're done.

Other option for rosin is Wax Liquidizor, just mix with decarbed rosin and your done.

No idea you could do it by the method used in this thread, pretty neat!
When you say wax liquidizer do you mean an option like a terpenes flavor addition or an extract of sorts. Like this ?
 
Screenshot 20241112 092025
Newty

Newty

15% Off Fast Buds Orders, Code: NEWTY42
Supporter
2,054
263
When you say wax liquidizer do you mean an option like a terpenes flavor addition or an extract of sorts. Like this ?
Looks to be pretty much the same as I was talking about.
This is the actual brand Wax Liquidizor I was specifically talking.

 
katraiter

katraiter

817
143
Looks to be pretty much the same as I was talking about.
This is the actual brand Wax Liquidizor I was specifically talking.

I see , very cool. This just got a whole lot more fun and Interesting 🤣 I can't wait to experiment now! Gonna have to def try that out!
 
T

tinytmp

47
8
I did the same with quitting cigarettes but after about a year the vape was making it hard to breathe which made it easy to quit vapping. I've played around with making my own THC and/or CBD vape juice but never really succeeded. I bought a qt of both the vg and pg 3-4 years ago (since rats got into it and ate them both) but didn't like the results. I even tried 90% alcohol tincture added and blended as well as evaporating off the alcohol. No dice.

Since I found the herb vapes
View attachment 2233781
I'm pretty happy although a pen battery that would fit and work would be the ultimate, imho😉
Well. I tried and its awful - but...
It was definitly because of the bud i used. I didnt want to waste anything good on an experiment, so the flavor was really bad - like hay and leaves.
I tried 2 ways - long term flower soak at room temp and heating (steaming) the juice jar with flower at 220 for 25 minutes ELFLIQ.

Also have to work on my pg/vg ratio as it was too thin, caused some leaking issues.

So, some lessons learned but i have to wait until harvest for another crack at it - Im sure better weed will produce a better flavor.
Your extract is very potent, even after just 3 days of steeping. The typical guideline of 1 gram of cannabis to 1 ounce of PG is just that—a guideline, and the potency can vary based on the strain and how well the cannabinoids are extracted. If you're feeling overly intoxicated after using a small amount, it’s likely because the extract is very concentrated. Sub-ohm vaping can deliver more potent effects than other methods, which might be why you’re feeling such a strong effect from only 1/4 of a 5ml tank. You may want to dilute the extract with more PG to reduce the potency or try a smaller dose next time. The steeping process could also strengthen the extract over time, so test again after a longer period if you want to adjust.
 
Blastfact

Blastfact

1,324
263
I don't decarb as a separate step. I break bud up. mix up a jar of 75/25 vg/pg. Mix the bud in with the vg/pg and let it set for a hour. Then put it in a hot water double pan setup at 140F until the vg/pg mixture get to 140F then pull it and let it steep for 30 days. Then filter with bruckner filter and lab paper. Then flavor up however I want, let it set another 7 days. Then put it in a sub-ohm or rda rig. A few rips and I'm gone. I make a lot of my own vape juice so I have all the flavor stuff. I use a 1/2 oz of weed to a quart of vg/pg to make rocket fuel ass kicking juice. If I want a sweeter base juice I use Palm base vg. If I want a more neutral base I use regular veggie base vg. I'm sensitive to pg so sometimes I make juice with as little as 10 or 15 percent pg. I give a lot of my juice away to my adult daughters and close friends. Some cut it more with over the counter vape juice,,, some don't. Most vape it out of a sub-ohm rig. And never complain.
 
juliando

juliando

41
18
I don't decarb as a separate step. I break bud up. mix up a jar of 75/25 vg/pg. Mix the bud in with the vg/pg and let it set for a hour. Then put it in a hot water double pan setup at 140F until the vg/pg mixture get to 140F then pull it and let it steep for 30 days. Then filter with bruckner filter and lab paper. Then flavor up however I want, let it set another 7 days. Then put it in a sub-ohm or rda rig. A few rips and I'm gone. I make a lot of my own vape juice so I have all the flavor stuff. I use a 1/2 oz of weed to a quart of vg/pg to make rocket fuel ass kicking juice. If I want a sweeter base juice I use Palm base vg. If I want a more neutral base I use regular veggie base vg. I'm sensitive to pg so sometimes I make juice with as little as 10 or 15 percent pg. I give a lot of my juice away to my adult daughters and close friends. Some cut it more with over the counter vape juice,,, some don't. Most vape it out of a sub-ohm rig. And never complain.

Soaking for 25 days or so on a dark-ish shelf. Tried some this morning and Im impressed - good flavor and strength so far.
I didnt add any other flavors but the Vg is sweet and the weed smell is already strong.
Decent high - little kick to the sinuses, but not super strong yet.
Ive heard its supposed to soak for 60 days so I hope it will continue to improve.

Could you imagine how much this much this would cost at a dispensary? This is more than 200 cartridges, crazy.

View attachment 2319962
So - curing for 60 days now, and its not much stronger than it was at 15 or 20 days (maybe a little)
Defenitly not as intense as regular dispensory product - not as much sinus burn or cough. But as im typing this i realize - its creeps up on you, like a very strong edible high.
Flavor is good but ill try adding some others next time. Probably do a stronger mix next harvest - 1/2 ounce to 4oz juice maybe?

Thanks for the advice everyone
 
I

Imjonesin

4
3
Hey if anyone has tried using the altafuse to make a concentrate and then converted that into a decent vape juice please let me know. I’m new here so if I don’t get back to y’all right away I’m still learning the platform.

I’d like to make the purest/highest potency shatter and add it to a vape juice with a little bit of nicotine that has no weed smell at all.

I think it can be done using the ultrasonic method. I don’t have the altafuse yet but will soon.

BTW I quit smoking cigarettes and started vaping around 2013. Started making my own nic vape juice about 8 years ago.

Any advice would be great
Thx
 
Top Bottom