Drip system top off, replace, flush? Also h²0²?

  • Thread starter Jones20992
  • Start date
  • Tagged users None
Jones20992

Jones20992

37
18
I will be running a recirculating drip system .9 gal pots, 20 gal reservoir, RO water, expanded clay pebbles for a medium, critical mass strain in a 36x48x60 tent with 20 plants SOG.

Running a 2000w equivalent led (yeah I know not 2000w) lights specs are

Power Consumption : 400 watt
Working Current : 3.8 Ampere
Lumen : 28556 lux
Spectral Ratio (RGB) : 66.3% 28.2% 5.5%
Red 620-630nm/650-670nm, Blue 450-470nm,White 6000-6500K, Orange 590-610nm,UV 370-410nm, IR 730-750nm
768umol/m2/s

Running full foxfarm hydro as per feeding schedule
Drip system top off replace flush also h0


If I understand this correctly this is how I should manage feeding

Mix nutrients in order of top to bottom 1 at a time for 1 gal until ppm is within range, test ph and adjust as needed.

Daily top off with water test ppm, add nutrients as needed for target ppm, test ph and adjust.

At end of odd week drain to waste, mix 20 gal with new weekly recipe

At end of even week drain flush with sledgehammer then mix 20 gal.

Also plan on adding hydrogen peroxide at 3% per gallon strength.

Do I have this right?
 
Jones20992

Jones20992

37
18
***EDIT***

Power Consumption : 400 watt
Working Current : 3.8 Ampere
Lumen : 28556 lux
Spectral Ratio (RGB) : 66.3% 28.2% 5.5%
Red 620-630nm/650-670nm, Blue 450-470nm,White 6000-6500K, Orange 590-610nm,UV 370-410nm, IR 730-750nm
768umol/m2/s


768umol/m2/s is @ 2ft
 
Top Bottom