HELP choosing light for my indoor tent

  • Thread starter Maya.blue
  • Start date
  • Tagged users None
M

Maya.blue

10
3
hello folx
first of all new here thanks all for your help and answer
i buy all the equipment that needed, well not all but most of the equipment.
i only need to chose light now, and i need your help for this.
so the main light that i think will be good is the Samsung LM301B light

My tent is
180cm - Tall
120cm Wide
60cm - Deep
* i thinking about 3-4 plants to put inside (automatic plants)

now i need to chose a light, so ther is much options for the LM301B kind:
-1 board 3000k
-2 board 3000k
-1 board 3000k +660mn
-2 board 3000k +660mn
-1 board 4000k
-2 board 4000k

so i am really confus and need your help here!
thnks alot
 
Jimster

Jimster

Supporter
2,770
263
I'm not a LED grower and I'm not familiar with the boards you are speaking about, but for a general growing/flowering setup , I'd recommend the 2 board 3000K w/ 660 nm reds added. This should be good for general growth with extra emphasis on the flowering part, due to auto's being grown. If you were going to change spectrums for growing and flowering, I'd go with the 2 board 4K for vegg growing, and the 3K w/ 660 for flowering. If you aren't gong to change boards, I'd go with the 2 board 3K w/ 660.
Just my 2 cents.
 
M

Maya.blue

10
3
I'm not a LED grower and I'm not familiar with the boards you are speaking about, but for a general growing/flowering setup , I'd recommend the 2 board 3000K w/ 660 nm reds added. This should be good for general growth with extra emphasis on the flowering part, due to auto's being grown. If you were going to change spectrums for growing and flowering, I'd go with the 2 board 4K for vegg growing, and the 3K w/ 660 for flowering. If you aren't gong to change boards, I'd go with the 2 board 3K w/ 660.
Just my 2 cents.

So you think i go with
2 board 3000k+660mn
Or
Just 2 board 3000k
 
Jimster

Jimster

Supporter
2,770
263
So you think i go with
2 board 3000k+660mn
Or
Just 2 board 3000k
If you are going to grow and flower without changing any lights around, I would get the 2X 3000K W/ 660nm. The reason for this is the 660 nm far red is for benefits during flowering. I'm not experienced with specific LED frequencies, but as a general rule, 3000K is better for flowering, 4000K is better for vegging. I use both a 1000w HPS an a 1000w 10000K MH, swapping the two every other week to provide the benefits of both lights, although this is the 1st time that I've used a 10K bulb along with the HPS... usually I use a HPS and a 3000K MH with enhanced reds.
 
M

Maya.blue

10
3
If you are going to grow and flower without changing any lights around, I would get the 2X 3000K W/ 660nm. The reason for this is the 660 nm far red is for benefits during flowering. I'm not experienced with specific LED frequencies, but as a general rule, 3000K is better for flowering, 4000K is better for vegging. I use both a 1000w HPS an a 1000w 10000K MH, swapping the two every other week to provide the benefits of both lights, although this is the 1st time that I've used a 10K bulb along with the HPS... usually I use a HPS and a 3000K MH with enhanced reds.

Thnks you for your great answers
I go with the 2*3000+660mn
Thnks alot bro
 

Latest posts

Top Bottom