Help with sealed room setup 👍

  • Thread starter Ziongrows
  • Start date
  • Tagged users None
airedog

airedog

Supporter
298
93
It'd be 1.5m,2.2m,2.0m and I was planning on using 4 gn telos 0008s which are 240w each.

If you are trying to push your plants and get the best bang for your buck; for that size space, i'd definitely be looking at considerably more light. GN's site says this about the fixtures;

1596489882812


PF (380-780nm)459.8 μmol/s
1.909 μmol/joule
PPF (400-700nm)449.8μmol/s
1.867 μmol/joule
VISUAL (WORKING LIGHT)Colour temperature: 3002 kelvin
Colour rendering index: 86 CRI
Luminous flux: 25,145lm
PHOTOBIOLOGY SAFETY
(STN EN 62471:2009)
 
Anthem

Anthem

4,155
263
When I've looked at insulation i can't find any that are R-19 .. I found one that said R-Value: 43m2K/W Will that be okay?
All of the US based insulation products should show an R value.
This will give you some additional information on the R value you should be looking at
Also there should be R value for all of the products listed. If you are in another country take a look at the chart from Home Depot and size and density with a NON R value product should work well. The product Aqua Man is using is inexpensive and works well. Just tape the seams as he mentioned. Good luck with your grow!!!!
 
Top Bottom