House of 1000 colas festuring the spider farmer 4x4 tent, 2 bucket hydro kit and the 6in oscilatoting fan

  • Thread starter Captspaulding
  • Start date
  • Tagged users None
Captspaulding

Captspaulding

What’s the matter? Don’t like clowns? 🤡
Staff
Supporter
22,233
638
@SpiderFarmerLED se7000 is making these ladies veg hard
Honorable mentions being the g4500 and the se3000 with those sweet 6in oscillators rocking the circulation, I’m able to remove my 16in shop fan. And just rock those instead.
New layout AGAIN. I think I have it sorted finally and won’t need to mess with the layout again.
I’m selecting 6 moms that will go in the tent, and flip in a few days. Perpetual cloning in the not so distant future. I have some mag creeping, so they got put on a lower shelf than the rest, they will get right, there always a few when I run these kind of numbers. for such a challenging grow, I also finished running the ventilation for the tent with the 4inch inline so now the manifold in ceiling is being used to its full potential, lights are raised as high as possible. With this layout it’s an output game. wouldn’t have it any other way. Thx @SpiderFarmerLED
The over under rig is back in full effect 👊🏻🤡
 
IMG 7987
IMG 7972
IMG 7969
IMG 7964
IMG 7963
IMG 7983
IMG 9706
IMG 7988
IMG 7998
IMG 7997
IMG 8001
IMG 7999
IMG 8005
Mikedin

Mikedin

Staff
Supporter
7,897
313
@SpiderFarmerLED se7000 is making these ladies veg hard
Honorable mentions being the g4500 and the se3000 with those sweet 6in oscillators rocking the circulation, I’m able to remove my 16in shop fan. And just rock those instead.
New layout AGAIN. I think I have it sorted finally and won’t need to mess with the layout again.
I’m selecting 6 moms that will go in the tent, and flip in a few days. Perpetual cloning in the not so distant future. I have some mag creeping, so they got put on a lower shelf than the rest, they will get right, there always a few when I run these kind of numbers. for such a challenging grow, I also finished running the ventilation for the tent with the 4inch inline so now the manifold in ceiling is being used to its full potential, lights are raised as high as possible. With this layout it’s an output game. wouldn’t have it any other way. Thx @SpiderFarmerLED
The over under rig is back in full effect 👊🏻🤡
Killin it as usual cap! 🤌👊👊
 
Captspaulding

Captspaulding

What’s the matter? Don’t like clowns? 🤡
Staff
Supporter
22,233
638
OK so today i’ll be waking this sleeping thread up and the title will be getting changed on it but if you’ve been following it, you should still get the notifications so you can get my updates. Will also be linking it in the Trainwreck thread for anybody that’s not aware that this thread exists. I’ll be setting up a new spider farmer 4 x 4 tent with a couple of hydroponic buckets from spider farmer the SE 7000 will be in the tent with a couple of 6 inch spider farmer oscillating fans. outside of the 4x4 tent I will have an SE 3000 getting set up in a 2 x 2 space Next to a separate 2 x 4 tent that I have that will be housing The spider farmer G 4500 and underneath that tent will be a nursery area that will be running off of the spider farmer SF 2000.
As it stands at the moment, I have one mystery sativa that is 6-7 weeks into flower
Three kahuna plants that range from the end of week five to week seven Ish
I have a PK ultra
A blue sherbet sunset
Two cali dreams
One Maui okie man
Cement shoes x gary payton x okie
A kahuna in a half gallon pot that is actually my chosen phenotype from my previous run out of four different Phenos of the kahuna strain that I made my plan is to harvest it and revenge it so I can go ahead and breed it

I will also be setting up my cloning box that I plan on stuffing full of original skunk number one cuts, so I can move that mother out into flower and then once all of those cuttings root, I will be getting as many cuttings as possible from my haymeadow purp
To keep this spider farmer powered show in the road. As usual I’m stuffing 1 million friggin things in here but it’s gonna work. I’m excited to see how everything shakes out in the end and I’ll be glad to have each and everyone of you on the ride updates will be coming through on this as soon as possible.
Chunk bunker version 9.0 bout to get rowdy.
Heres a before shot.
👊🏻🤡
 
IMG 8381
Captspaulding

Captspaulding

What’s the matter? Don’t like clowns? 🤡
Staff
Supporter
22,233
638
OK, so I received the tent, I received the 6 inch oscillator fan, which is a much better design this year. Everything about it is just nicer more more user-friendly, and easier to clean. In my opinion. The mechanics in the neck seem solid and it pushes a lot more air too, since they opened up the grating on the casing for the fan blades.
So the tent is pretty rad it has pick points on the roof so you can use your lights, ascending hangers in order to clip to the top of the tent and open it up and then hoist it for a one person build. It’s incredibly handy and made the first few steps of getting the construction underway like a total breeze.
The tent outer fabric is great. It’s made out of rip stop which is wonderful stuff. It can take a beating. They also send patches in case anything happens which is convenient. Ventilation options are plentiful and the SE 7000 fits in it perfectly fills in that roof makes it look good And the vertical size of the tent is a wonderful thing too. I like a lot more headroom than you know you’re two by twos or two by fours or threes.
Hydro buckets coming soon, i b hi have them
Ill be selecting a few new strains to run.
A big shout out to @spiderfarmer for making killer equipmeni. Flower pics are
Goofy boots
Cali dream
Maui 86 purple pheno3
Unkown sativa
👊🏻🤡
 
IMG 9883
IMG 9873
IMG 9875
IMG 9878
IMG 9879
IMG 9882
IMG 9881
IMG 9877
IMG 9880
IMG 9907
IMG 9903
IMG 9904
IMG 9908

Latest posts

Top Bottom