How long can you soak in butane?

  • Thread starter Dinodabs
  • Start date
  • Tagged users None
Dinodabs

Dinodabs

2
1
How long is too long? Using fresh live bud frozen. Using this
412vIdGplVL._AC_SY580_.jpg
 
Ponky

Ponky

1,777
263
If it's ground up you should only need to fill it. Then open the lower valve. If you leave it too long. Chlorophyll taste. And I assume you're vacuum purging in a pot so you probably don't want to do a distillation.

To read when you're smoking: https://skunkpharmresearch.com/getting-the-green-and-waxes-out-afterwards/

You can probably get away with a longer soak. I would do some test batches. And time them. Come up with what works for your taste. Over soaked is bad. Under soaked is a waste.

Tamisium extractors are sealed and the stuff is in there for a while. 30 minutes would be the longest I would soak I suppose. http://www.tamisiumextractors.com/

So. Summary. Almost no time up to 30 minutes.
 
GrowHobo

GrowHobo

488
143
Those little table tops are dope I hadn’t seen these yet.
 
Dinodabs

Dinodabs

2
1
If it's ground up you should only need to fill it. Then open the lower valve. If you leave it too long. Chlorophyll taste. And I assume you're vacuum purging in a pot so you probably don't want to do a distillation.

To read when you're smoking: https://skunkpharmresearch.com/getting-the-green-and-waxes-out-afterwards/

You can probably get away with a longer soak. I would do some test batches. And time them. Come up with what works for your taste. Over soaked is bad. Under soaked is a waste.

Tamisium extractors are sealed and the stuff is in there for a while. 30 minutes would be the longest I would soak I suppose. http://www.tamisiumextractors.com/

So. Summary. Almost no time up to 30 minutes.
Yea I don't want to ruin the color or taste and not looking to do crc either. I wouldn't feel comfortable soaking longer than 30 seconds to a minute but I see other people saying longer. They don't mention the quality difference with long soaks tho and that's what I'm worried about. I guess i could do another quick run with the same material into a different dish to get the last bit.
Those little table tops are dope I hadn’t seen these yet.
Yea they nice af. Excited to try it out. Super simple and efficient extractor. https://www.amazon.com/gp/aw/d/B06XT2BPMN/ref=ox_sc_saved_image_2?smid=AWMD3Y9GWXKN7&psc=1

I'll try to get some dry ice to put it in also.
 
Ponky

Ponky

1,777
263
Yeah I would just fill. Shake. And it was 17% or more yield I would call it good. Guess you don't have a dry weight. But an estimate works.

It's a lot better than the open blast pvc tube and coffee filter set up. So my only concern is the explosive risk. It is a pipe bomb in a way.
 
GrowHobo

GrowHobo

488
143
Yea I don't want to ruin the color or taste and not looking to do crc either. I wouldn't feel comfortable soaking longer than 30 seconds to a minute but I see other people saying longer. They don't mention the quality difference with long soaks tho and that's what I'm worried about. I guess i could do another quick run with the same material into a different dish to get the last bit.

Yea they nice af. Excited to try it out. Super simple and efficient extractor. https://www.amazon.com/gp/aw/d/B06XT2BPMN/ref=ox_sc_saved_image_2?smid=AWMD3Y9GWXKN7&psc=1

I'll try to get some dry ice to put it in also.
Post up some pics of the finished. We wanna see how it turns out!
 
Top Bottom