PK1
Supporter
- 3,459
- 263
Titanium Aquarium Heater 300w
My apologies ahead of time for this product review to be on the wrong section.
INKBIRDPLUS 300W Submersible Aquarium Heater - Keep your fish or other pet warm and comfy!
15.55''(L) x 3.15''(W) x 1.77''(H), 1.7M/5.5ft cable
Our aquarium heater is simple and beautiful in appearance, placed in your aquarium, unobtrusive.
You and your fish will like it and it is made of titanium tube material, which has the performance of anti-breaking, anti-explosion, anti-cracking and anti-corrosion. This heating rod can be applied to salt water and fresh water, and the heating effect is better than other materials.
It will turn off automatically when reaches temperature you set, without overheating.
For the products, we have been keeping improving.
Please tell us if you have any questions or suggestions during use, we value every user’s opinion, and make improvements
Here is another great product from @inkbird. The Titanium Aquarium Heater is a great submergible heater that can be put in aquarium or if you live in cold part of the world and need to warm your reservoir to feed your plants. I have used it in the last few days and it has kept the heat of a 90 gallon tank constant.
The display adapter sure makes it easy to know what your settings are at and or what the current temps are.
Just make sure that the heater is fully submerged in the tank!!
My apologies ahead of time for this product review to be on the wrong section.
INKBIRDPLUS 300W Submersible Aquarium Heater - Keep your fish or other pet warm and comfy!
15.55''(L) x 3.15''(W) x 1.77''(H), 1.7M/5.5ft cable
Our aquarium heater is simple and beautiful in appearance, placed in your aquarium, unobtrusive.
You and your fish will like it and it is made of titanium tube material, which has the performance of anti-breaking, anti-explosion, anti-cracking and anti-corrosion. This heating rod can be applied to salt water and fresh water, and the heating effect is better than other materials.
It will turn off automatically when reaches temperature you set, without overheating.
For the products, we have been keeping improving.
Please tell us if you have any questions or suggestions during use, we value every user’s opinion, and make improvements
Here is another great product from @inkbird. The Titanium Aquarium Heater is a great submergible heater that can be put in aquarium or if you live in cold part of the world and need to warm your reservoir to feed your plants. I have used it in the last few days and it has kept the heat of a 90 gallon tank constant.
The display adapter sure makes it easy to know what your settings are at and or what the current temps are.
Just make sure that the heater is fully submerged in the tank!!
Why Choose Inkbird?
- Noiseless
- Overheat protection
- Intelligent Display
- Durable Suction Cups
- Easy to Set up
- Anti-corrosion Titanium Material
- Work well in saltwater and freshwater
- Built-in smart IC chip to accurately control the heating temperature
Specifications
- Power: 300 Watt
- Voltage: 110V
- Suits for Water Volume: 50-60 gallon(189-227L)
- Heater length: 15.55, inches diameter: 0.9 inch
- Power cord length: 5.5ft
- Temperature control range: 68℉-94℉
- Waterproof level: IP68
SIZE
| LED Intelligent Indicator Light-Red Light: Water temperature is a below-set range, heating function will engage and increase temperature automatically.-Blue Light: When the temperature has reached the set goal, the heater will keep it. | Set the Temperature Conveniently
| 2 Stable Suction Cup Angles
|
Attention
We do not recommend using heaters in acrylic acid or plastic tanks;The heating tube of the aquarium must be submerged under water; Before turning on the power, put the heater in the aquarium for 20 minutes to adjust to the water temperature; To take out the aquarium heater, first disconnect the power supply and wait for 20 minutes, then take it out; The powershall be cut off firstly and the heating rod is cooled before replacing water or moving the heating rod. The monitor is not waterproof, please keep it away from water.- E1: Water shortage or the temperature probe on the top of the heater may be blocked by small bubbles
- E2: Water temperature over 94℉
- E6: Water temperature over 96℉