
Ninjadogma
- 266
- 93
Help please,
What causes this clawing? It's mostly on the new tips of the Hash Plant,
but a couple of clones are starting it as well. The only things different on these
vs. the big nasty; are the lights (800w vs 720w), & the addition of Hydrogaurd
and Terpinator to the mix. Leaf-top temps averaging around 80f. Ph is checked
every couple hours and drifts between 5.8 & 6.2, (5.9 average) Reservoir temp
averages 74-78f. Light is on 24/7
*red circle is the plant it started with
What I've done so far:
Flushed with plain water for 2 hrs. Mix fresh batch of nutes.
Lowered light output from 70% down to 30%
Lowered the N and the overall nute mix from 1250 ppm to 1050ppm
Stop adding hydrogaurd and Terpinator. Dropped feeding from
continuous to 15 on, 15 off.
I am just monitoring now to see if it worsens or stabilizes
Any help or thoughts on this is greatly appreciated, THANK YOU!
I don't see a clawing issue in the pics... Looks more to me like some minor tacoing and the good news is since you backed off everything they should relax a little, the bad news is you may not find out what the true culprit was for dialing in better.