deseee
- 55
- 6
Putting together the fittings list, can you guys check it over make sure I'm not forgetting anything or that my math is horribly wrong? Also do I need O-rings?
36x Female Adapter NPTF Polypro - 1/4 x 1/8 NPTF adapters for the misters
18x Union Tee Polypro - 1/4 going to run 2 misters per solenoid
18x Male Connector NPTF Polypro - 1/4 x 1/4 NPTF connects from solenoid out to misters
18x Solenoid
18x Male Connector NPTF Polypro - 3/8 x 1/4 NPTF connects from 3/8 feedline to solenoid
25x Union Tee Polypro - 3/8, 16 for connecting feed line 7 for routing near pump/tank 2 spares
15x Union Elbow Polypro - 3/8. 6 for connecting feed lines, 8 for near pumps, 1 spare
10x Shut-Off Valve-Polypro Straight - 3/8 Tube x 3/8 Tube, 8 with 1 for each 8 ft section of pipe, 1 for shutoff at the tank, 1 spare
2x Male Connector NPTF Polypro - 3/8 x 1/2 NPTF connects to each side of relief valve although one side needs a brass female to female coupling.
2x Female Adapter NPTF Polypro - 3/8 x 1/4 NPTF for connecting gagues
1x Male Connector NPTF Polypro - 3/8 x 3/8 NPTF for connecting pressure switch
Whee were getting into the thick of it now!
36x Female Adapter NPTF Polypro - 1/4 x 1/8 NPTF adapters for the misters
18x Union Tee Polypro - 1/4 going to run 2 misters per solenoid
18x Male Connector NPTF Polypro - 1/4 x 1/4 NPTF connects from solenoid out to misters
18x Solenoid
18x Male Connector NPTF Polypro - 3/8 x 1/4 NPTF connects from 3/8 feedline to solenoid
25x Union Tee Polypro - 3/8, 16 for connecting feed line 7 for routing near pump/tank 2 spares
15x Union Elbow Polypro - 3/8. 6 for connecting feed lines, 8 for near pumps, 1 spare
10x Shut-Off Valve-Polypro Straight - 3/8 Tube x 3/8 Tube, 8 with 1 for each 8 ft section of pipe, 1 for shutoff at the tank, 1 spare
2x Male Connector NPTF Polypro - 3/8 x 1/2 NPTF connects to each side of relief valve although one side needs a brass female to female coupling.
2x Female Adapter NPTF Polypro - 3/8 x 1/4 NPTF for connecting gagues
1x Male Connector NPTF Polypro - 3/8 x 3/8 NPTF for connecting pressure switch
Whee were getting into the thick of it now!