THCFarmer.com
121,301 Members Log In Register
Log In Register

New Grow Room Problem

  • Thread starter Thread starter BigDog5656
  • Start date Start date
  • Tagged users Tagged users None

New Grow Room Problem

BigDog5656 32 Replies 2,600 Views
Page 1 of 2 · Replies 1–20 of 33
B

BigDog5656

Posts
9
Reactions
18
Joined
Feb 3, 2016
Points
3
#1
Hello all, I've run into a small issue which I'm in dire need of help!

First I'll explain the room;
I have nice large space that's available to me which is roughly 33' long x 16' wide and has 12' ceilings. There is also an 8x8space empty space behind the main room and in front of the main room on the same side (right outside wall). I'd also like to note that the unit is all block exterior walls but the left hand wall is shared, the right is open to the back of the building.

Second my plan;
I wanted to split the room into two both equal in size and having them both running on 12 hour flower cycles.

Third my main equipment;
4- 10" max fans
2 - can100 filters
2-8" fans
5-6" fans
18- 1000's+ ballasts

Now I'll explain the problem I have; I have nowhere to vent, I originally wanted to intake and exhaust from the sealed rooms through the roof (which is a flat roof). Now I've found I cannot due to condition of the flat roofing material for fear id be opening up a can of worms! Any advice for my current predictament would be greatly appreciated.
 
#2
BigDog5656 said:
Hello all, I've run into a small issue which I'm in dire need of help!

First I'll explain the room;
I have nice large space that's available to me which is roughly 33' long x 16' wide and has 12' ceilings. There is also an 8x8space empty space behind the main room and in front of the main room on the same side (right outside wall). I'd also like to note that the unit is all block exterior walls but the left hand wall is shared, the right is open to the back of the building.

Second my plan;
I wanted to split the room into two both equal in size and having them both running on 12 hour flower cycles.

Third my main equipment;
4- 10" max fans
2 - can100 filters
2-8" fans
5-6" fans
18- 1000's+ ballasts

Now I'll explain the problem I have; I have nowhere to vent, I originally wanted to intake and exhaust from the sealed rooms through the roof (which is a flat roof). Now I've found I cannot due to condition of the flat roofing material for fear id be opening up a can of worms! Any advice for my current predictament would be greatly appreciated.
Click to expand...
Wait for it........air conditioning! !!
 
#5
Hmm, completely sealed room with a/c vs his plan on using intakes and exhausts...

As for the roof, after inspecting it, it's actually almost 3" of tar and gravel. They've decided to patch over and over the original roof which I'm afraid if I dig out the gravel, and re-tar it I won't have a perfect seal and have a natural automatic shower system lol
 
#6
BigDog5656 said:
Hmm, completely sealed room with a/c vs his plan on using intakes and exhausts...

As for the roof, after inspecting it, it's actually almost 3" of tar and gravel. They've decided to patch over and over the original roof which I'm afraid if I dig out the gravel, and re-tar it I won't have a perfect seal and have a natural automatic shower system lol
Click to expand...
Whats to worry about man? U got it!!!! It can definitely be done
 
#7
As they say, if you want something done right, you need to do it yourself! I wish I'd taken control of this situation earlier. When now I'll have the clones ready by the weekend and need to make decisions swiftly.
 
#9
set up a titan temp/humidity/co2 module so you arent wasting co2, vent out high on the siding under the roof, depending on your climate I'd just make a register in the siding for an intake on the floor of the opposite side of where you are pushing it out so all the plants get fresh air.
 
#11
scubascrog said:
set up a titan temp/humidity/co2 module so you arent wasting co2, vent out high on the siding under the roof, depending on your climate I'd just make a register in the siding for an intake on the floor of the opposite side of where you are pushing it out so all the plants get fresh air.
Click to expand...

No siding on the building, only concrete blocks, otherwise if that were the case I would definitely done that!
 
#15
Take and scribe some marks on the block of the size hole ya wanna cut , drill some holes in it w a hammer drill along ur marks and knock it out w a slefge and a chisel. Or u can use a chuppin hammer....
 
#16
G gnome said:
Dude, then just cut some holes in the block.....? Idk whats the problem?
Click to expand...

I prefer to be "stealthy". I guess at the end of the day, the solution is right infront of me. I just need to pull the trigger.

I promised the building owner I would be discrete in having this set up!

Quite possibly I'm making the problem larger then it needs to be.
 
#17
BigDog5656 said:
I prefer to be "stealthy". I guess at the end of the day, the solution is right infront of me. I just need to pull the trigger.

I promised the building owner I would be discrete in having this set up!
Click to expand...
Well, ya got ur options pal. Wall, roof or a.c.. thats why i suggested the roof instead of the wall....more discrete
 
#20
G gnome said:
Best o luck. If ya need me to tell ya anything else u already know u know where to find me haha
Click to expand...

Sometimes you just need the "just f'n do it, n stop whining" talk I suppose. Lol.

I'm out of my element here and don't like flying by the seat of my pants without confirmation.
 
Page 1 of 2 · Replies 1–20 of 33
Back
Top Bottom