So First Grow

[Closetfarm]

So this is my first grow it’s only bagseed but any way. It’s inh soil but is now showing mould on the soil the plant seems to be growing ok if a bit slow. And the soil is always moist so I’m reluctant to feed in case of overwatering is There any tips or just leave it to the soil drys not added any water in 3 weeks

 

[MW7945]

So this is my first grow it’s only bagseed but any way. It’s inh soil but is now showing mould on the soil the plant seems to be growing ok if a bit slow. And the soil is always moist so I’m reluctant to feed in case of overwatering is There any tips or just leave it to the soil drys not added any water in 3 weeks

You haven't added water in 3 weeks and the soil is wet? Is there any type of fan in the area to move air around?

Pictures would help

 

[Closetfarm]

You haven't added water in 3 weeks and the soil is wet? Is there any type of fan in the area to move air around?

Pictures would help

Yeah theres table fan in temp is constant about 68 to 70 and humidity is about 55. The soil is heavier peat. I’ll upload some pictures to show

 

[MW7945]

Hmm. Temp is pretty low, but if I had to guess they're in too big of a pot if they're taking that long to dry

 

[Closetfarm]

Oh that could be it

 

[MW7945]

What are you using for light?

But, yes, that pot is pretty big for that small of a plant. Another problem is drainage in general. With something like that you want to add a good amount of perlite to increase drainage. You're essentially trying to grow in a mud puddle right now by the looks of it

 

[Closetfarm]

Its a 300w full spectrum grow light

Is there anything I can do at this point to the soil to increase drainage

 

[MW7945]

How high above the plants is the light?

As far as the soil, I'm not a soil grower so I'm not much help there. Hopefully someone else can answer that one

 

[MW7945]

This probably isn't what you wanna hear, but if it was me I'd just scrap it and start over. If you cut around the plant and pull it out to add perlite you'll slow growth quite a bit most likely. And if you were to keep going you'd more than likely experience root rot, if that hasn't already begun. It's hard to tell the health of your plant under the blurple lighting.

 

[Closetfarm]

How high above the plants is the light?

As far as the soil, I'm not a soil grower so I'm not much help there. Hopefully someone else can answer that one

Lights about 24” above
Thanks for the advice

 

[Closetfarm]

This probably isn't what you wanna hear, but if it was me I'd just scrap it and start over. If you cut around the plant and pull it out to add perlite you'll slow growth quite a bit most likely. And if you were to keep going you'd more than likely experience root rot, if that hasn't already begun. It's hard to tell the health of your plant under the blurple lighting.

Would it be possible to clone it from the stem in new soil.

 

[MW7945]

Would it be possible to clone it from the stem in new soil.

How old is it from seed?

 

[Closetfarm]

How old is it from seed?

It’s 7 weeks old now

 

[Closetfarm]

It’s just seed is not easy come by here and well there’s a short supply of bud too. So was hoping to get something from this

 

[MW7945]

To be honest if you have more seeds I'd cut your losses. These plants are about 5 weeks old from seed. The closest in the photo is behind them and at about 4 weeks. This is my second grow.

My point being, if you were to chop that and try to clone it, you'd probably be out the same amount of time and still have a small plant. You'll have a much better run if you go through and fix the issues you had this run. For 7 weeks that's not much plant.

Next time start in a much smaller pot and work your way up.

 

[MW7945]

Can you get a picture of the plant under natural lighting?

 

[Closetfarm]

Can you get a picture of the plant under natural lighting?

That’s it I don’t have any other seeds here is the prob so slow growing or no growing is my option

 

[Snakeskins]

Oh that could be it

You need some drainage in your soil because it does look like your using a pot of mud for your medium.
GL with your 300w LED. I'm currently using the galaxyhydro 300w myself.

 

[MW7945]

The plant color looks better than I anticipated at least. I'm just not sure how to add drainage to an already potted plant personally

 

[Monster762]

Looks like you need more air movement and better soil. The plants should wiggle but not blow all around. I usually put fan at the wall in med or high and let the deflected air move plants. Or get oscillating fan. Is that soil really compact? Do you push on sides of pot to loosen it? You definately need perelite. The stems would be thicker if there was good air movement. But the plants are not dead you just got to get them on the right track. You could try transplant n put in new soil. Get as much of that dirt off as you can without damaging roots. Take mix peat perelite n worm casting if you have it
lot of perelite