THE TRAINWRECK. Brought to you by thcfarrmer…..

[Thatoneguyyouknow_]

Yeah the nlxm86 cloned so easily I cut the top off and got a second clone.

@BB22


Fwiw I tend to strongly recommend using the beefiest cuttings you can to make clones. Especially if you plan on reclining the clones to keep them around and not making a clone mother plant.

You can successfully clone any material with a growth node on it and make a new plant. But if you use robust mature growth the genetics of the plant and your end result will drift over time a *lot* slower.

If you clone a clone a clone etc from smaller less developed growth sometimes a genetic becomes pretty useless after only a handful of generations.

I've cloned a clone a clone etc for as long as half a decade with no noticable genetic drift with big meaty cuts. I've had em go wonk on me after 3 generations with tiny undeveloped growth cuts.

Wonk can mean a drop off of resins/potency. A drop off in yield, changes in physical expression and structure, going super stretched and almost reveg looking and other undesirable happenings.

These plants are annuals, def keep clone generation counts as low as possible and keep your cuts as close to the main apex meristems as you can reasonably get away with


Take big meaty clones from the tops of your plants and you will prob be feeding most of them back into veg 2 weeks later.

 

[BB22]

@BB22


Fwiw I tend to strongly recommend using the beefiest cuttings you can to make clones. Especially if you plan on reclining the clones to keep them around and not making a clone mother plant.

You can successfully clone any material with a growth node on it and make a new plant. But if you use robust mature growth the genetics of the plant and your end result will drift over time a *lot* slower.

If you clone a clone a clone etc from smaller less developed growth sometimes a genetic becomes pretty useless after only a handful of generations.

I've cloned a clone a clone etc for as long as half a decade with no noticable genetic drift with big meaty cuts. I've had em go wonk on me after 3 generations with tiny undeveloped growth cuts.

Wonk can mean a drop off of resins/potency. A drop off in yield, changes in physical expression and structure, going super stretched and almost reveg looking and other undesirable happenings.

These plants are annuals, def keep clone generation counts as low as possible and keep your cuts as close to the main apex meristems as you can reasonably get away with


Take big meaty clones from the tops of your plants and you will prob be feeding most of them back into veg 2 weeks later.

Awesome Sauce my Man !!

 

[Thatoneguyyouknow_]

So has anyone else made the "confused ocean forest and happy frog" mistake before?

Friend had an old bag of fox farm soil he never used and I took it off his hands and put it to use. It was ocean forest and thought I remembered using it back in the day. That was definitely the happy frog stuff though lol.

Can't believe my plants aren't a total crispy mess. Lucky they're not totally nuked into oblivion by acidic lockout. Also no wonder I got nute burn in flower at like 450ppm in tent 1 last run and I'm hunting weird mild deficiency issues trying to dial in tent 2 after a ton of flushing. Tbh I was starting to think my meters went wonky. I have new ones on the way lol

I'm literally growing plants from salted bat shit and worm puke

As funny as it is stupid Imo

 

[BB22]

Quite frankly the touch up paint will stand out more than the damage. Might be able to have a detail shop apply it then cut and buff it. I am one picky guy. Paint matching would bug me more than the scratch / chip.

In my 50s now . Seen some things. Difficult for me to imagine chipped paint and disappointment from parents being a thing .

We all walk our own path

 

[BB22]

My parents were disappointed

 

[capone304]

just another dude in the sticks haha

Where’d you get my 4th grade picture?

It all ties together lol,

I collect anything retro lol, the little mermaid with the case with the dildo in the castle

Gotta get a bigger tv for down here took it upstairs and replaced another one haha

The old little mermaid case my sister's had the top of the castle was a big golden cock they changed it after a recall I believe she still has it

 

[capone304]

First ever indoor harvest complete well as long as I don't ruin the dry n cure my big cman x okie filled my tent with three runs of branches I'ma say 10 oz minimum hopefully a lb

 

[Bobcat.Branch]

i was mainly posting on how to use it outside. i could give a fuck about what he thinks. it's his opinion.

Oh, hey... I wasn't calling bullshit on you! Forgive me if that's the way it came across. I was calling bullshit on that dude's reasoning.

 

[Bobcat.Branch]

First ever indoor harvest complete well as long as I don't ruin the dry n cure my big cman x okie filled my tent with three runs of branches I'ma say 10 oz minimum hopefully a lb

Fucking awesome! So, party at your place after the cure, oh say April 20?

Congrats!

 

[ForestSpirit]

Я как бы хочу назвать бредом его теорию о том, что палатка выдыхает ароматизированный воздух, а затем его очищает фильтр. Может быть, в какой-то степени, но позднее цветение сделает дом ароматным. Также сомневаюсь, что втягивание свежего воздуха (и фильтрация того, что выходит из палатки) влияет на терпены. Если втягивание свежего воздуха и выдыхание убивает терпены, фильтр не является частью этого уравнения. Это будет делать только сам воздухообмен, и никто не жаловался на поиск терпенов с тех пор, как были изобретены арендные платы и вентиляторы.

Кто-нибудь, просветите меня, пожалуйста, какими-нибудь фактами.

.The air has too complex a composition to hope for stability with such a design. If there is a problem with the smell, the filter is installed at the end of the sleeve in a wider housing. And the sleeve gets wider. Reduce the speed for more efficient cleaning.The gas pressure will drop without air supply, so the system has no use.

 

[Mikedin]

Morning folks!

 

[DanielWesterfield]

Morning homies!

 

[capone304]

Fucking awesome! So, party at your place after the cure, oh say April 20?

Congrats

She should have a nice smooth state by then... hopefully

 

[Bobcat.Branch]

 

[Mikedin]

View attachment 2386215

On my 3rd cup already haha

Morning homies!

Morning brother!

 

[DanielWesterfield]

On my 3rd cup already haha

Morning brother!

Hope you have a great day mate!

 

[Leoman]

Quite frankly the touch up paint will stand out more than the damage. Might be able to have a detail shop apply it then cut and buff it. I am one picky guy. Paint matching would bug me more than the scratch / chip.

I watched a bunch of youtube videos last night and ordered a small DA buffer and some compound. I have paint that matches the factory code but it's in 2 parts. A base coat and a "pearl" coat that goes on top. I'm hoping even if the color doesn't match 100% it won't be very noticeable if it's smooth enough.

I kind of doubt I'll have the balls to go through with it and end up at the detail shop but it looked sort of easy in the videos. Although one said to buff the entire panel so the finish doesn't look uneven.

 

[Bobcat.Branch]

I watched a bunch of youtube videos last night and ordered a small DA buffer and some compound. I have paint that matches the factory code but it's in 2 parts. A base coat and a "pearl" coat that goes on top. I'm hoping even if the color doesn't match 100% it won't be very noticeable if it's smooth enough.

I kind of doubt I'll have the balls to go through with it and end up at the detail shop but it looked sort of easy in the videos. Although one said to buff the entire panel so the finish doesn't look uneven.

Thoughts and prayers

That shit would drive me bonkers.

 

[Leoman]

Thoughts and prayers

That shit would drive me bonkers.

I'll need it. lol

I'm still in shock that it went down like that and feel nothing. I had the light off and was just going to blow some smoke out there and be done with it but didn't remember leaving all that shit around the steps. The cheap ash catcher disintegrated into a million tiny pieces but at least I had a spare bowl so the night wasn't a total loss.

 

[TheGoldenRoad]

@Captspaulding
Was looking through some ancient photos and found this sticker.
Hubby built the clocks, and set up the timing lights in Columbiaville, MI, a lifetime ago.

Drag racing is dangerous but those drag boats on a smooth inland lake are the ultimate insanity.

View attachment 2385891

Man tell me about it. My neighbor bought a drag boat and put a massive motor that runs on alcohol I believe. The lake is about 7 miles or so away as the crow flies and that boat rattles my windows up here when he opens it up. Those things are insane.