Log In Register

THE TRAINWRECK. Brought to you by thcfarrmer…..

How’s she coming along? Nursing in flower is something I am not good at : ) Finicky but it’s gonna you know finish out. It’s got a couple of really nice colas on it. It’s just that it was a very mild case mild amount of distortions yeah it doesn’t like...
Home Forums Medical Cannabis Cultivation Grow Diaries THE TRAINWRECK. Brought to you by thcfarrmer…..
Grow diary eligible · Medical Cannabis Cultivation

THE TRAINWRECK. Brought to you by thcfarrmer…..

by Captspaulding · Started
1d
Running
0
Updates
95,543
Replies
1
Images
Discussion below · 95,543 replies
Page 2930 of 4778 · Replies 58,581–58,600 of 95,544
Status
Not open for further replies.
How’s she coming along? Nursing in flower is something I am not good at : )
Finicky but it’s gonna you know finish out. It’s got a couple of really nice colas on it. It’s just that it was a very mild case mild amount of distortions yeah it doesn’t like the heat though. It’s getting warm in this tent I haven’t been used to running these things like this in flower and it gets hot in this thing.
 

Attachments

  • image.jpg
    image.jpg
    272.2 KB · Views: 6
Last edited:
so today is kinda cool,
My youngest cassius just turned 18….
So thats 2 kids that made it in one piece
I couldnt be prouder of the knucklehead.
And thats a wrap on raising kids for this old goat,….🤣
Spent the past couple days kicking it with the kid.
That youngun is no slouch,
Can hang with her old man, i wmoke alot of grass.
And there wasnt a “puff puff” that went by with out the kid all “pass it”


I need a shirt that has
“AYE CAPT, pass that shit!”
Printed upside down so everytime i look down im reminded.

Anywho, pics in a bit.
Think im gonna break out the canon long lens amd snap flower shots. The veg side of things is taking off now that im cranking it up,
Hope everyone is well, coffee is hot, spliff is eww weee and your plants crackin’
💚💚💚👊🏻🤡
Mornin’ Capt ✌️

IMG 5008
 
I have been using this website for a couple years now to try and determine the potency of the edibles that I make. It works well enough to give you a ballpark sense of what your dosage is.
Www.veriheal.com
problem is i have no idea how much % is my weed and then when i press it i have no idea how much is left inside.and then the pressed grass is compressed i think even that would be a difference in 1g since this one is almost no water inside
 
Finicky but it’s gonna you know finish out. It’s got a couple of really nice colas on it. It’s just that it was a very mild case mild amount of distortions yeah it doesn’t like the heat though. It’s getting warm in this tent I haven’t been used to running these things like this in flower and it gets hot in this thing. I can’t wait to get out of this tent.
Dang dude she’s lookin good though! Nice work : ) its kind of fun for the challenge but I totally hear you on cant wait to get it out of there!
 
BRICKTOP
(Cement chews)
 

Attachments

  • IMG_1099.jpeg
    IMG_1099.jpeg
    218.1 KB · Views: 10
  • IMG_1101.jpeg
    IMG_1101.jpeg
    230.4 KB · Views: 6
  • IMG_1100.jpeg
    IMG_1100.jpeg
    283.2 KB · Views: 9
  • IMG_1096.jpeg
    IMG_1096.jpeg
    337.3 KB · Views: 7
  • IMG_1097.jpeg
    IMG_1097.jpeg
    324.1 KB · Views: 8
  • IMG_1098.jpeg
    IMG_1098.jpeg
    198.2 KB · Views: 8
Train wreck

@BearWater

Only looks halfway decent because i donned the gloves and shears, isopropyl and a mean hankering to clean that bum up a bit.
I got rid of all the topside malformed leaves.
 

Attachments

  • IMG_1102.jpeg
    IMG_1102.jpeg
    362.7 KB · Views: 9
problem is i have no idea how much % is my weed and then when i press it i have no idea how much is left inside.and then the pressed grass is compressed i think even that would be a difference in 1g since this one is almost no water inside
@MartyMcFly42oh @cpurola


What Id do/reccomend for edibles, is I make bubble hash first then make a full spectrum oil. It makes everything edibles simpler to work out and a lot less wasteful of product through experimenting

Once the hash is dry I'll soak it in 91% isopropyl or some ever clear (I prefer iso) for a bit. No need to quick wash it since the bulk of the chlorophyll containing matter is already gone.

After soaking about 15-20 mins in a jar with lots of shakes I'll pour it through a double coffee filter (you can squeeze the excess out since little to not chlorophyll matter)

I'll pour this filtered alcohol into a Pyrex dish and put it in the oven set to 200f (if you have a gas or propane oven don't be stupid)

I'll let it sit till the alcohol is gone then close the oven and let it bake at 200f for 2-3hrs. That way all the decarbing is already done.

I'll pull the dish out and scrape up the amber oil. I guage potency by taking a dab of it and comparing to something I know the potency of or often don't even compare it at all.

I'll scrape up and melt this oil right into hot budder or coco oil/mct and take it off the heat as soon as it's nice and homogenous. No need to add water, no need to cheese cloth or strain at all. It's ready to go. Ready to cook.

It's easy to make small sample batches and test potency and take notes for future batches this way too. And if your a clone grower you'll figure out exactly which of your plants are most ideal for edibles pretty easily and wasting very little product in the process. You can make one cookie at a time with a single tablespoon of budder til you know your math and perceived potency this way if you want to.

When it comes to gauging potency of edibles straight THC mg content is really only super meaningful with edibles made with straight THC distillate, not full spectrum oils from flowers too. There's a lot of entourage effect and variability that's doesn't translate 1 for 1 to edibles, and sometimes entourage effects pop out of edibles that don't exist in the smoked product too and that's why the retail market tends to use pure THC distillate and dose by pure mg content. It's just more predictable and repeatable that way.

No guesswork or extra experimentation, just dial in and run it.


P.s. edibles taste WAY better this way too lol
 
Last edited:
kahuna
These dont mind the heat one bit.
Opened the tent it was 92 this am…..
No biggy
 

Attachments

  • IMG_1082.jpeg
    IMG_1082.jpeg
    259.6 KB · Views: 6
  • IMG_1081.jpeg
    IMG_1081.jpeg
    163.8 KB · Views: 6
  • IMG_1083.jpeg
    IMG_1083.jpeg
    286.9 KB · Views: 7
  • IMG_1084.jpeg
    IMG_1084.jpeg
    308.8 KB · Views: 7
  • IMG_1085.jpeg
    IMG_1085.jpeg
    281.6 KB · Views: 7
Oaxoa hash p1-2
Looking legit af
 

Attachments

  • IMG_1079.jpeg
    IMG_1079.jpeg
    283.1 KB · Views: 5
  • IMG_1078.jpeg
    IMG_1078.jpeg
    295 KB · Views: 8
so today is kinda cool,
My youngest cassius just turned 18….
So thats 2 kids that made it in one piece
I couldnt be prouder of the knucklehead.
And thats a wrap on raising kids for this old goat,….🤣
Spent the past couple days kicking it with the kid.
That youngun is no slouch,
Can hang with her old man, i wmoke alot of grass.
And there wasnt a “puff puff” that went by with out the kid all “pass it”


I need a shirt that has
“AYE CAPT, pass that shit!”
Printed upside down so everytime i look down im reminded.

Anywho, pics in a bit.
Think im gonna break out the canon long lens amd snap flower shots. The veg side of things is taking off now that im cranking it up,
Hope everyone is well, coffee is hot, spliff is eww weee and your plants crackin’
💚💚💚👊🏻🤡
Plants are cracking, joints rolled, coffees drank!

Happy birthday to lil Spaulding!

On the menu today
1000017616
 
@MartyMcFly42oh @cpurola


What Id do/reccomend for edibles, is I make bubble hash first then make a full spectrum oil. It makes everything edibles simpler to work out and a lot less wasteful of product through experimenting

Once the hash is dry I'll soak it in 91% isopropyl or some ever clear (I prefer iso) for a bit. No need to quick wash it since the bulk of the chlorophyll containing matter is already gone.

After soaking about 15-20 mins in a jar with lots of shakes I'll pour it through a double coffee filter (you can squeeze the excess out since little to not chlorophyll matter)

I'll pour this filtered alcohol into a Pyrex dish and put it in the oven set to 200f (if you have a gas or propane oven don't be stupid)

I'll let it sit till the alcohol is gone then close the oven and let it bake at 200f for 2-3hrs. That way all the decarbing is already done.

I'll pull the dish out and scrape up the amber oil. I guage potency by taking a dab of it and comparing to something I know the potency of or often don't even compare it at all.

I'll scrape up and melt this oil right into hot budder or coco oil/mct and take it off the heat as soon as it's nice and homogenous. No need to add water, no need to cheese cloth or strain at all. It's ready to go. Ready to cook.

It's easy to make small sample batches and test potency and take notes for future batches this way too. And if your a clone grower you'll figure out exactly which of your plants are most ideal for edibles pretty easily and wasting very little product in the process.

When it comes to gauging potency of edibles straight THC mg content is really only super meaningful with edibles made with straight THC distillate, not full spectrum oils from flowers too. There's a lot of entourage effect and variability that's doesn't translate 1 for 1 to edibles, and sometimes entourage effects pop out of edibles that don't exist in the smoked product too and that's why the retail market tends to use pure THC distillate and dose by pure mg content. It's just more predictable and repeatable that way.
i tried a few times making bubble hash but i just cant i always mix too hard or leave it too long or something soo i gave up on it.
do you get that much better taste when you make hash? i would go directly to alchohol it would extract the same i guess.and i would skip the butter since you already extracted it all.

i would love to be a clone grower but i cant be growing every day every year.and all my friends are non growers soo i cant let them keep it.
but i like your way it looks like a perfect way to know how much is in your stuff
 
i tried a few times making bubble hash but i just cant i always mix too hard or leave it too long or something soo i gave up on it.
do you get that much better taste when you make hash? i would go directly to alchohol it would extract the same i guess.and i would skip the butter since you already extracted it all.

i would love to be a clone grower but i cant be growing every day every year.and all my friends are non growers soo i cant let them keep it.
but i like your way it looks like a perfect way to know how much is in your stuff
Going straight to alcohol with flower pulls chlorophyll and cellulose and it'll taste exactly the same as making it from straight flower and nearly as difficult to judge potency before making them. You have to quick wash with dry flour to avoid extra chlorophyll and cellulose with alcohol because it's only a semi-polar solvent.. and then you leave a lot of the goodies behind too

If you make the bubble first it removes the chlorophyll and cellulose from the equation so you can actually get all of the oils out of the trichomes without pulling a bunch of chlorophyll and cellulose too, and that's the important part when it comes to gauging potency and the end flavor being so nice this way ime


Making the bubble first is actually the reason this method works so well and it so consistent
 
Status
Not open for further replies.
Page 2930 of 4778 · Replies 58,581–58,600 of 95,544
Back
Top Bottom