THCFarmer.com
121,287 Members Log In Register
Log In Register

controlling mars hydro ts1000 with ac infinity pro controller

  • Thread starter Thread starter budsofgeorgia
  • Start date Start date
  • Tagged users Tagged users None

controlling mars hydro ts1000 with ac infinity pro controller

budsofgeorgia 17 Replies 6,239 Views
Page 1 of 1 · Replies 1–18 of 18
1
budsofgeorgia

budsofgeorgia

Posts
1,860
Reactions
3,992
Joined
Aug 11, 2023
Points
263
#1
is anyone controlling a mars hydro ts1000 with the mean well drivers with a ac infinity controller 69 pro ? i been trying to get mine to work but the only thing happens is the lights turn off with i plug into the dimer on the light , i have the uis lighting adapter b , i have the app set to time on and off time i want plus the brightness of the on and off times but light just wont turn on
 
#2
Just guessing... Does the light have a switch for external control?
 
#3
Hey Buds! I will be messing with this myself tomorrow with my Mars FC3000 and the 69Pro controller. I also have a Mars TS1000 light. I can't look at it now, but I wonder if the setting on the driver has to be off or maybe it has a setting for "Ext"? During "lights on" tomorrow, I will mess around with it and report back. I will check here to see if you got it figured out first, though! ;-)

Smoke
 
#4
You could try updating the AC app, and making sure you have your settings set to config 1. I believe with your dimmer you want to either turn it all the way up on your light, or all the way down.

Make sure you have the cable plugged into channel 1 on your light. If you set the dimmer to low and then high and neither works try turning the manual dimmer completely off and seeing if that works.

Update us after youā€™ve tried these methods. I have a dongle A and B for two different lights and the dongle B you have to set your app to the config 2 setting.

Hope this helps brotha!
 
#5
i have been playing around with it since 5 pm today i have turned the power buttons off and on i have turned the ext button on and off
LoveGrowingIt said:
Just guessing... Does the light have a switch for external control?
Click to expand...

Smokeshow said:
Hey Buds! I will be messing with this myself tomorrow with my Mars FC3000 and the 69Pro controller. I also have a Mars TS1000 light. I can't look at it now, but I wonder if the setting on the driver has to be off or maybe it has a setting for "Ext"? During "lights on" tomorrow, I will mess around with it and report back. I will check here to see if you got it figured out first, though! ;-)

Smoke
Click to expand...

blueicegrows said:
You could try updating the AC app, and making sure you have your settings set to config 1. I believe with your dimmer you want to either turn it all the way up on your light, or all the way down.

Make sure you have the cable plugged into channel 1 on your light. If you set the dimmer to low and then high and neither works try turning the manual dimmer completely off and seeing if that works.

Update us after youā€™ve tried these methods. I have a dongle A and B for two different lights and the dongle B you have to set your app to the config 2 setting.

Hope this helps brotha!
Click to expand...
 
#6
i have 3 lights daisey chained 2 ts1000 and 1 tsl2000 all have the same drivers i have only messed with the buttons on the main light , i wonder if all of the ext button on all 3 lights would have to be off
 
#7
budsofgeorgia said:
i have 3 lights daisey chained 2 ts1000 and 1 tsl2000 all have the same drivers i have only messed with the buttons on the main light , i wonder if all of the ext button on all 3 lights would have to be off
Click to expand...
I would assume youā€™d need to input the dongle on the first light in the chain, set all the dimmers to off, and see if that works. If not you could try inputting to the last light in the chain, and doing the same. Wish I could remember if the dimmer needs to be set to low, off, or high. Let me know if you figure this out brother, curious myself.
 
#8
well i just tried it with only 1 light and i got it to work but as soon as i daisey chained all lights went off
 
#9
budsofgeorgia said:
well i just tried it with only 1 light and i got it to work but as soon as i daisey chained all lights went off
Click to expand...
Install the daisy chain to the channel 2 on the first light, assuming your light has two channels inputs. Channel 1 input plug the dongle into, On the second and third light plug your connector cords into the channel 1 spot?

That really blows if you canā€™t control them all.
 
#10
blueicegrows said:
Install the daisy chain to the channel 2 on the first light, assuming your light has two channels inputs. Channel 1 input plug the dongle into, On the second and third light plug your connector cords into the channel 1 spot?

That really blows if you canā€™t control them all.
Click to expand...
i did
 
#11
I run multiple lights daisy chained with AC Infinity Controller 69.

Drivers on all lights should have to be in extension mode.
All need to be in Extension mode because the Controller 69 acts as the 1st "light" in the chain and controls the rest.
1 RJ11 adapter from Controller 69 to first light and then link all the lights together.

If you're using lights with different wattage, it will still work but all lights have to have the same dimming style, all 0-10v or all resistor type.

Also want to mention that ACI says my HLG light uses B adapter but it wouldn't work so I tried the A adapter and works great.
I happened to have an extra A laying around to test.

Best best would be to contact Mars Hydro and ask them if they use 0-10v or resistor type or try to look up the specs of the driver itself from Meanwell
 
Last edited:
#12
Newty said:
I run multiple lights daisy chained with AC Infinity Controller 69.

Drivers on all lights should have to be in extension mode.
All need to be in Extension mode because the Controller 69 acts as the 1st "light" in the chain and controls the rest.
1 RJ11 adapter from Controller 69 to first light and then link all the lights together.

If you're using lights with different wattage, it will still work but all lights have to have the same dimming style, all 0-10v or all resistor type.

Also want to mention that ACI says my HLG light uses B adapter but it wouldn't work so I tried the A adapter and works great.
I happened to have an extra A laying around to test.

Best best would be to contact Mars Hydro and ask them if they use 0-10v or resistor type or try to look up the specs of the driver itself from Meanwell
Click to expand...
lights work fine daisey chained be daisey chained every time i have used them
i unplugged the daisey chain and my controller 69 would control the 1 light but as soon as i plugged in the rest of the lights they all cut off
 

Attachments

  • IMG_20241111_221349814.jpg
    IMG_20241111_221349814.jpg
    192 KB · Views: 1
#13
the tsl2000 i got has a different driver on it i do not think the adapter i got will work for it BUT the 2 ts1000 has the same mean well drivers on the same thing happens i can control 1 light as soon as i plug in the 2nd light they go off
 
#14
budsofgeorgia said:
the tsl2000 i got has a different driver on it i do not think the adapter i got will work for it BUT the 2 ts1000 has the same mean well drivers on the same thing happens i can control 1 light as soon as i plug in the 2nd light they go off
Click to expand...
Both lights are plugged into power, set to extension, and RJ cable linked to the proper in and out connection on the driver?
Did you try the 2nd RJ configuration in the Controller settings?

Can I see pictures of how you have the adpater plugged in and how you have the RJ cables ran and daisy chained?

I'm sure you have it correct,
I'm usually pretty good at figuring this stuff out and enjoy doing so but I do better with visuals lol
 
#15
Just thought of something....

Try using a RJ11 Splitter instead of daisy chaining the drivers.

Reference drawing below on how it should be ran with RJ11 splitter.
Both Drivers would still need to have ext turned on and I believe both cables would go to the 1st RJ11 port on both drivers because port 1 is the input (2 output) and it's receiving (input) from the Controller 69.

20241120 193608
20241120 193615
20241120 195001
 
Last edited:
#16
my tent is a little to full to mess with the lights like that i will wait to the grow is over and plants are out of tent to figure it out or just use my spider farmer sf4000 instead of the mars lol , the type b adapter says that it shoudl work with daisey chained lights that u just have to plug the controller into 1 light then daisey chain following the light manufactures instructions
 
#17
budsofgeorgia said:
my tent is a little to full to mess with the lights like that i will wait to the grow is over and plants are out of tent to figure it out or just use my spider farmer sf4000 instead of the mars lol , the type b adapter says that it shoudl work with daisey chained lights that u just have to plug the controller into 1 light then daisey chain following the light manufactures instructions
Click to expand...
I have lights that have 2 RJ ports on each driver and only work with the splitter and like the diagram I drew.

Thats what made me think of it.

Very simple to do, no more work then going through the drivers themselves.
RJ11 Splitter cost $5 or less

The Controller 69 needs to send the signal to each light through the splitter simultaneously instead of going through the driver because it interrupts that signal.
 
#18
Newty said:
Just thought of something....

Try using a RJ11 Splitter instead of daisy chaining the drivers.

Reference drawing below on how it should be ran with RJ11 splitter.
Both Drivers would still need to have ext turned on and I believe both cables would go to the 1st RJ11 port on both drivers because port 1 is the input (2 output) and it's receiving (input) from the Controller 69.

View attachment 2326676View attachment 2326677View attachment 2326678
Click to expand...
hey bro i got some rj11 2way splitters to try and they still did not work for my ts1000's , so i sent them back and got some rj12 2 way splitters and tried them and they worked for the ts1000's , my tsl2000 has a different type of driver that is not meanwell or mars branded see pics so i can not get that one to work with either a or b adapters
now with my adapter b i have the 2 way spiltter on it and 1 side run to my spiderfarmer sf4000 and the other side run to 1 of the ts1000 and from there the other ts1000 is Daisey chained
 

Attachments

  • IMG_20250106_223331326.jpg
    IMG_20250106_223331326.jpg
    130 KB · Views: 1
  • IMG_20250106_223342033.jpg
    IMG_20250106_223342033.jpg
    160.6 KB · Views: 1
  • VID_20250106_225153661.mp4
    13.7 MB
Page 1 of 1 · Replies 1–18 of 18
1
Back
Top Bottom