Log In Register

doobers grow tent, seedlings clones and flowers

I run mine about 20-24 inches off the canopy. Once they hit a strong stride in veg I’ll bump it up in increments of 10% at the beginning of flower until I hit ~1000 ppfd or the plants let me know enough is enough. My light will veg great at 40-50% but I...
Home Forums Medical Cannabis Cultivation Grow Diaries doobers grow tent, seedlings clones and flowers
Grow diary eligible · Medical Cannabis Cultivation

doobers grow tent, seedlings clones and flowers

by doober · Started
1d
Running
0
Updates
105
Replies
0
Images
Discussion below · 105 replies
Page 4 of 6 · Replies 61–80 of 106
I run mine about 20-24 inches off the canopy. Once they hit a strong stride in veg I’ll bump it up in increments of 10% at the beginning of flower until I hit ~1000 ppfd or the plants let me know enough is enough. My light will veg great at 40-50% but I try to get it really cranked up for flower
I just bought a meter....I need to bump up my game. Anything to get those buds fatter, heavier....
 
I think once you get your environmentals in check, the big buds are mostly genetics. I ran the same clones under 430watts and again at 650-700 I didn’t get them any bigger just more total dry weight


I got my meter...attached some pics...so you are saying 400-500...for veg. And up to 1000 for flower.....of course stepping it up to max....
 

Attachments

  • 17626942125787982011968142783758.jpg
    17626942125787982011968142783758.jpg
    129.4 KB · Views: 1
  • 17626941839326425126925536258332.jpg
    17626941839326425126925536258332.jpg
    118.8 KB · Views: 1
  • 17626942235893556224075370110809.jpg
    17626942235893556224075370110809.jpg
    176 KB · Views: 1
I got my meter...attached some pics...so you are saying 400-500...for veg. And up to 1000 for flower.....of course stepping it up to max....
That’s basically what I do, but not all plants will take the 1000 ppfd without co2, just kind of watch for light stress as you ramp it up. Do it in small 5-10% increments and wait 5-7 days before you go up again, watch for clawing and tacoing and bleaching. You’ll probably need to feed heavier and more often with a dramatic light increase
 
Day 11, rocking and rolling. They’re drinking around 7gal pot dry in a day so I’m watering daily until they slow down now. Holding 2.0ec and around 750-800ppfd according to Photone and homemade diffuser, I really want to thin them out but I’m going to wait until their done stretching stretch slows down since vpd is holding just fine. The blueberry sugar is clawing and drooping a touch today I think it was just getting too dry and thirsty hopefully it’ll be back to praying in a few hours
Also some bubble hash I washed to squish.


IMG 5279
IMG 5283
IMG 5282
IMG 5284
IMG 5277
 
I really wanted to hold off until 20ish days to thin everything out but it was just too over grown, didnt want to risk any mold or mildew issues. Still have ptsd from powdery mildew last year lol.

I’m still running at 2.0ec and I’ve worked the light up to 90% without much issues. They get a little canoeing/tacoing about an hour before lights out but reset every morning, I’ve got a little tip burn but I think I’m just riding a thin line between hard pushing and pushing too hard.
IMG 5309
IMG 5308
IMG 5307


Also I pressed thay bubble hash, first time pressing rosin but I think I did too much pressure way too fast. It’s super dry and waxy but smokes clean and tastes ok, I don’t know Jack about rosin though but I’m thinking about hot water bathing some and whipping it to see if I can reconstitute it or something
IMG 5297
IMG 5299
IMG 5300


It’s crumbly and dry but is hard and melty like candle wax
 
I really wanted to hold off until 20ish days to thin everything out but it was just too over grown, didnt want to risk any mold or mildew issues. Still have ptsd from powdery mildew last year lol.

I’m still running at 2.0ec and I’ve worked the light up to 90% without much issues. They get a little canoeing/tacoing about an hour before lights out but reset every morning, I’ve got a little tip burn but I think I’m just riding a thin line between hard pushing and pushing too hard. View attachment 2562573View attachment 2562574View attachment 2562575

Also I pressed thay bubble hash, first time pressing rosin but I think I did too much pressure way too fast. It’s super dry and waxy but smokes clean and tastes ok, I don’t know Jack about rosin though but I’m thinking about hot water bathing some and whipping it to see if I can reconstitute it or something
View attachment 2562576View attachment 2562577View attachment 2562578

It’s crumbly and dry but is hard and melty like candle wax
Plants look awesome my friend....I need to clean mine out as well....
 
Thanks that defol was a pain I didn’t consider how hard the second trellis would make it 😂
I was doing a trellis....have found them to be a pain in the ass....they have there purpose....but couldn't see inside cause of a pain to defo....had a plant hermaphrodite on me...I will re-address the trellis at a later date.
 
I was doing a trellis....have found them to be a pain in the ass....they have there purpose....but couldn't see inside cause of a pain to defo....had a plant hermaphrodite on me...I will re-address the trellis at a later date.
I really like them, I just run a 4x4 for short veg and flower, and a 2x4 for clones and mom's. but I figure in the 4x4 I want to get the maximum yield I can and make as much use of my space as possible so I try to cover every little bit. I didn't get a full fat tent this round I flipped early I was afraid if I didn't the permanent marker would dominate everything, I need to see if I can lower the top trellis maybe
 
Day 21, these girls are pushing really hard and drinking a 7g pot dry every 24 hours. I’m just trying to keep everything steady since they’re happy and hope they throw down big stinky flowers

I really need a light meter but I’m sure I’m at least 900-1000 par up top I’m running my lamp at 90% ~657 watts like 12 inches off the tops
IMG 5330
IMG 5336
IMG 5333
IMG 5338
 
I was getting more calcium spots and spreading pretty fast, I thought it was from too much light/heat but I’m pretty certain it’s falling out of solution in my reservoir, my ph has been jumping up, it’s been a little warm and I was getting a thin brown film in the bottom of my tote, I got a small 80 GPH pump on a smart outlet cycling on and off, 1 minute on 1 minute off, it should level out and finish strong
 

Attachments

  • IMG_5392.jpeg
    IMG_5392.jpeg
    238.5 KB · Views: 2
  • IMG_5391.jpeg
    IMG_5391.jpeg
    267.7 KB · Views: 1
  • IMG_5390.jpeg
    IMG_5390.jpeg
    217.2 KB · Views: 4
  • IMG_5388.jpeg
    IMG_5388.jpeg
    282.6 KB · Views: 1
  • IMG_5389.jpeg
    IMG_5389.jpeg
    203.8 KB · Views: 1
  • IMG_5393.jpeg
    IMG_5393.jpeg
    284.4 KB · Views: 1
  • IMG_5395.jpeg
    IMG_5395.jpeg
    215.9 KB · Views: 1
  • IMG_5396.jpeg
    IMG_5396.jpeg
    255.6 KB · Views: 1
  • IMG_5394.jpeg
    IMG_5394.jpeg
    324.8 KB · Views: 1
  • IMG_5397.jpeg
    IMG_5397.jpeg
    347.5 KB · Views: 1
  • IMG_5398.jpeg
    IMG_5398.jpeg
    334.3 KB · Views: 1
7 weeks
 

Attachments

  • IMG_5533.jpeg
    IMG_5533.jpeg
    245.3 KB · Views: 2
  • IMG_5534.jpeg
    IMG_5534.jpeg
    208.3 KB · Views: 1
  • IMG_5535.jpeg
    IMG_5535.jpeg
    232.8 KB · Views: 3
  • IMG_5536.jpeg
    IMG_5536.jpeg
    286.6 KB · Views: 2
  • IMG_5537.jpeg
    IMG_5537.jpeg
    275.4 KB · Views: 2
  • IMG_5538.jpeg
    IMG_5538.jpeg
    273.6 KB · Views: 2
  • IMG_5539.jpeg
    IMG_5539.jpeg
    299.7 KB · Views: 1
  • IMG_5540.jpeg
    IMG_5540.jpeg
    227.1 KB · Views: 1
  • IMG_5541.jpeg
    IMG_5541.jpeg
    220 KB · Views: 3
  • IMG_5542.jpeg
    IMG_5542.jpeg
    280.5 KB · Views: 1
  • IMG_5543.jpeg
    IMG_5543.jpeg
    313.7 KB · Views: 1
  • IMG_5544.jpeg
    IMG_5544.jpeg
    276.6 KB · Views: 1
  • IMG_5545.jpeg
    IMG_5545.jpeg
    235.4 KB · Views: 2
  • IMG_5546.jpeg
    IMG_5546.jpeg
    258.1 KB · Views: 1
Page 4 of 6 · Replies 61–80 of 106
Back
Top Bottom