Looking good Homie

Autos don't care
I never did a split for lights but it will not matter.
One thing that will matter is trying to get a DLI high enough to flower with a footprint for 4 square and a 100 watt panel in 12-12
You are looking at 25 watts a square foot.
Ironically doing all 18-6 or 20-4 autos would have worked out better as you will not have the light power for a photo.

JIMKSI64 said:

Autos don't care
I never did a split for lights but it will not matter.
One thing that will matter is trying to get a DLI high enough to flower with a footprint for 4 square and a 100 watt panel in 12-12
You are looking at 25 watts a square foot.
Ironically doing all 18-6 or 20-4 autos would have worked out better as you will not have the light power for a photo.

Click to expand...

Hey bro thanks for the advice I did some research and adjusted my light height to compensate for lack of wattage…hanging about 10 inches above canopy heat is not a problem …. gonna try to keep my light within 6 to 10 inches above canopy. For the duration of the flower cycle I need better quality fan. Also, I mean the fans doing the job but I need something I could have more space with and I might put another supplemental UCL.

OK completed one week of flower on pc3 3 weeks from seed on the autos. I didn’t know that I actually had my light a little too close. Need to relax a little bit on that everything you see in the notes is what I have pretty much been working with and I actually just did a very hard-core de- leafing recommended by a friend that I know that used to grow pounds in California and when I ran the pictures into the ChatGPT, it told me nine out of 10 that I was a little aggressive, but based off of their health of the plants after 12 hours looking good… The picture of the plants leaf is 12 hours after so they’re responding very well. I learned that you have to lighten up the PPFs. After doing this, so I did that raise the light and on my supplementary light I turned off the blue and red and just kept White. Well, I’m expecting to go about another nine weeks. Everything’s dialed in. I removed the autos at night and put them under the stove light.