Log In Register

12-12 from seed community journal

  • Thread starter Thread starter Coconutz
  • Start date Start date
  • Tagged users Tagged users None

12-12 from seed community journal

Coconutz 1,136 Replies 88,294 Views
Page 55 of 57 · Replies 1,081–1,100 of 1,137
@Coconutz , had to be my PH. Once I dumped the water I replaced the batteries and recalibrated both my pens. Couple days later everything is gravy.

I suggest replacing batteries in meter's at least once a year. I am almost positive that was my issue. .
 
I've bent her over and she's kinked, put a wire support. I'll leave her a day or two to get over the shock then do a good defol. Hopefully a dozen little colas.
Every cloud has a silver lining.
This isn't a strain I should be growing indoors as HH has a strong odour.
But it was a seed from an outdoor grow 2 years back and I can't stand to see seeds wasted.
Did y let a reveg doing their thang?
Early shaping and constantly pruning is the way to go, If y wanna do one again 👊
 
36 days down. Rocket boots engaged.
IMG 20260517 081814
 
I clipped 2 dozen leaves off her this morning. But I think she needs a week for the shoots to reach for the sky before I can see what I'm doing. Very thick foliage. At least the light is off now so just grow light on 12/12
Might still cut her where the main stem is bent. Shame I don't have time to take clones off her. Just hope the buds on her are ready by end July.
 

Attachments

  • VID_20260517_094240.mp4
    3.7 MB
I clipped 2 dozen leaves off her this morning. But I think she needs a week for the shoots to reach for the sky before I can see what I'm doing. Very thick foliage. At least the light is off now so just grow light on 12/12
Might still cut her where the main stem is bent. Shame I don't have time to take clones off her. Just hope the buds on her are ready by end July.
That's crazy looking. Did you just let it go the whole time or what's the story behind her?
 
I clipped 2 dozen leaves off her this morning. But I think she needs a week for the shoots to reach for the sky before I can see what I'm doing. Very thick foliage. At least the light is off now so just grow light on 12/12
Might still cut her where the main stem is bent. Shame I don't have time to take clones off her. Just hope the buds on her are ready by end July.
Tbh I don't think this will have an happy ending.
I'd cut at least half of the side stems off, but thats your choice and lesson.
Flower a reveg without three or five leafs will end up with popcorn buds and the stems won't be able to the the weight of them.
Topping is an option to support lower shoots, more uniform canopy and to get bigger stems.

I'am watching how it will end up, wish y good luck!
What's going on with her? It reminds me of that Frisian Duck strain.
I guess it's a reveg and without cutting and bringing them in shape it could end like that.
 
Is that not recommended? I've got a couple going that I cut few days ago. As of now doing amazing
I have never done it. I am a hydro guy. I take my clippings, dip in Olivia's rooting gel, pop into a ph balanced rock wool cube. Usually have roots in 3-5 days.
Soil I would worry about having to keep it too wet possibly getting some mold starting. If it works for you than heck ya!!!
Just keep growing just keep growing
 
So I put the yellowing blue digiberry back under the light yesterday it doesn't look too bad now.
20260516 184331

If it's light sensitive it's in trouble, I've already lowered the light down to 12/14" from the tips.
20260517 174723

I'm going to hang mylar across the open end to reflect light back in.
Screenshot 20260517 200803 Gallery

I got a few cuts from the blue Afghani Tues/Wed I think they've grown, nah they've definitely grown 🤗
20260517 165553

Today ^^^
20260514 155845

I made sure those top nodes were under the surface I deliberately uncovered them I wouldn't leave above the surface those clones are easy shot.
20260516 185922

Bonus buds 🤗
 
I clipped 2 dozen leaves off her this morning. But I think she needs a week for the shoots to reach for the sky before I can see what I'm doing. Very thick foliage. At least the light is off now so just grow light on 12/12
Might still cut her where the main stem is bent. Shame I don't have time to take clones off her. Just hope the buds on her are ready by end July.
I would be reluctant to continue with it bro until you've re vegged it, ime it's taken more that a week even in 24hrs light, sometimes you have to just have to put it down to experience and move on.

If we're mine I'd cut everything bar the least progressed shoots typically the bottom one's and put it in vegging hours.
Fwiw to take a clone you really only need a glass of water, ideally change it every day but not essential, changing the water keeps it clean and gives it a better oxygen ratio.

Good luck with your plans bro🤞
 
I burnt out my fan, I'm particularly annoyed at myself I've had it for about 5 years, when I was adjusting the light I must have leaned on the blade, whatever happened it's not working.
Screenshot 20260517 193554 Chrome

I ordered 1 of these dc powered fans it cost €35 that's like 2.5x my fan allowance 😄
Does anyone have a Dc fan?
10w is a little concerning but apparently Dc works different?
 
Hi guys
First thanks to everyone for your advice, first time I've revegged and it was an accident.
I cut off the main stem where I had bent it.
Far too many shoots and buds sites. I will wait for her to go into stretch so I can see what I'm doing, then choose which shoots to keep and which ones to remove. Hopefully I'll have a harvest of decent buds.
 

Attachments

  • IMG_20260518_115643.jpg
    IMG_20260518_115643.jpg
    263.2 KB · Views: 2
  • IMG_20260518_115648.jpg
    IMG_20260518_115648.jpg
    280.6 KB · Views: 1
  • IMG_20260518_115657.jpg
    IMG_20260518_115657.jpg
    264 KB · Views: 1
I burnt out my fan, I'm particularly annoyed at myself I've had it for about 5 years, when I was adjusting the light I must have leaned on the blade, whatever happened it's not working.
View attachment 2642660
I ordered 1 of these dc powered fans it cost €35 that's like 2.5x my fan allowance 😄
Does anyone have a Dc fan?
10w is a little concerning but apparently Dc works different?
I switched to pretty similar fans a few months back...saved a good 100w. They go alright. Have 10 settings, max is strong for 10w for sure.

I got a 4 pack of the mars hydro ones. Ended up being about $35 Aus each on sale. Pretty pricey but seem of way better quality.
 
I clipped 2 dozen leaves off her this morning. But I think she needs a week for the shoots to reach for the sky before I can see what I'm doing. Very thick foliage. At least the light is off now so just grow light on 12/12
Might still cut her where the main stem is bent. Shame I don't have time to take clones off her. Just hope the buds on her are ready by end July.
Ya can take clones at anytime. I see plenty of snips available on your video clip. Flowering doesn't matter. They root best if taken at 3wks 12/12. Ive even taken clones at harvest.

It's never to late for clones.
 
Well bad new came down the information pipeline 😔. Our maintenance guy got canned, this uptight mgr is forcing me to close up shop. Thank goodness I have a good home fer my two lil ones I brought back from failure to launch status.
I will hop here juss to see yer gardens explode with THC. I have another year sentence it this town hole. Also to offer any advice I thick would be helpful. Cheers 🥂
 
Well bad new came down the information pipeline 😔. Our maintenance guy got canned, this uptight mgr is forcing me to close up shop. Thank goodness I have a good home fer my two lil ones I brought back from failure to launch status.
I will hop here juss to see yer gardens explode with THC. I have another year sentence it this town hole. Also to offer any advice I thick would be helpful. Cheers 🥂
That sounds awkward bro I wish you best whatever happens with your job, I don't want to be nosey bur are you meaning a grow shop?
 
So my bro likes the Hsc blueberry cupcake, that's the one I re potted by accident thinking it was Bodhi.
After I realised the mistake I cut it down it wasn't worth the inconvenience of moving it out of my way every time I went into the tent, it turns out I was a bit haste but who's to know?

I keep everything off plants in a bag separately that I personally dispose off, who wants a nosey bin man poking his oar in, anyhow I thought I can maybe dig it out and revive it.
So the bag is stinking of silage/fermentation it's a horrible smell, I got elbow deep in all I've cut/defoliated since the new tent went up 🤮
20260520 173332

I knew roughly what I was looking for so I able to locate it with a bit searching and it doesn't look too promising?
20260520 174756

I'd intended to put the whole thing into water but some of the stem is mush so I've cut the shoots with healthier looking stem attached.
20260520 174756

The shooot actually in the water is my best chance atm but let's see if what happens with the others?
I'll give a bit time and see what happens if they perk up I'll get them into coco🤞
 

Attachments

  • 20260520_174806.jpg
    20260520_174806.jpg
    232.3 KB · Views: 1
Page 55 of 57 · Replies 1,081–1,100 of 1,137
Back
Top Bottom