Search results

  1. Glab120

    DIY vacuum purge - instructions unclear

    Sry bud if your having this much trouble building a vac chamber then I'm not sure you should be attempting to make oil. And yes ALL the lines, fitings and valves can be bought at Home Depot. "Here this might be what ur missing... Buy a 1/4 barb that screws into the ball valve, cut the ac...
  2. Glab120

    diy vacuum pruge station

    Great idea. I'll give it a try.
  3. Glab120

    diy vacuum pruge station

    This thread turns two years old tomorrow. I've changed my chamber/lid design at least a dozen times. And I'm always changing my purging technique. I'm amazed this info is still being passed around.
  4. Glab120

    diy vacuum pruge station

    It's hard to say (yes or no) you have everything needed.
  5. Glab120

    diy vacuum pruge station

    If at first you don't succeed...try agian. That's about the best advise I have. U should be fine the first time. Also the first ball valve is to separate the chambers vacuum from the pump once it's at full vac... This prevents the oil in the pump from being sucked into the chamber and running...
  6. Glab120

    diy vacuum pruge station

    Yes and yes.
  7. Glab120

    diy vacuum pruge station

    Sry I just looked at this site... To get a stable product at room temps I'll pull a vacuum and release it about 6 times in 30 min. This usually will get it stable. This allows you to very easily smush and form the glob and it shouldn't be sticky on the parchment paper at this Time. Put it back...
  8. Glab120

    diy vacuum pruge station

    Here's a better pic. I'm excited...it's been almost a year since my last grow.
  9. Glab120

    diy vacuum pruge station

    New grow setup...GDP cross with something... One week into 12/12. This is the first time I'm using a dual-arc bulb... So I'm excited to see if there's a difference.
  10. Glab120

    diy vacuum pruge station

    Random trim oil...
  11. Glab120

    diy vacuum pruge station

    Made this tonight form like 24gs of bud. Sooo fire!!!
  12. Glab120

    diy vacuum pruge station

    Here's a sneak peak...
  13. Glab120

    diy vacuum pruge station

    I couldn't find a ss chamber that I'm happy with but I got everything else finished so hopefully Tomm I'll have pics to share.
  14. Glab120

    diy vacuum pruge station

    You seem to Your on the right track for sure. I'm gonna be building another small 2-3 gallon setup Tomm for a buddy... So I will try to doucument everything and use it to revise my original DIY setup.
  15. Glab120

    diy vacuum pruge station

    Some random erl I made last...
  16. Glab120

    diy vacuum pruge station

    Blasted an once of og... Got 6.8gs return Head stash shit...
  17. Glab120

    diy vacuum pruge station

    ...BTW... Hey mods. Why can't you make this thread a "sticky"? I think it's worthy!?!?!
  18. Glab120

    diy vacuum pruge station

    I agree... I tried cutting a beer keg in half to like 15 gallons but that was a bitch... So I'm not sure if will do that agian. The stuff I photoed before might have gotten a lil hot...I'm not sure, I was a lil drunk. It was gooey for like a week then waxed up.
  19. Glab120

    BHO glossary of terms: how types differ and why

    Some strains are just prone to waxing up... While some stains consistently turn to a clear shatter. It's not all about purging techs, or quality. A lot of wax/budder is actually over purged while a lot of shatter is way under purged(of course there's always exceptions).
  20. Glab120

    diy vacuum pruge station

    Sooo........ Drunk last night me and my partner in"crime" chopped into a beer Keg and we made the first (mini monster) rig!!! Using his 6cfm pump we purged 42 grams in about 3 hours. The rig we built was sorta ghetto looking so I Dont wanna show it off yet... However were switching to the...
Top Bottom