could you guys suggest a good LED to replace 400w mh/hps in a 4x4 tent would like upgrade from the 400w yield thanks dvb403 long time listener first time caller :smoking::fire:
There are a lot using quantum brds, depending on budget , endless options.
My personal fav that’s cheap and works for a 4x4, viaspectra par 700 lights. Works well and yeilds about what you would out of a 400 hid.
Hlg lighting quantum boards. It’s what I run in both my 4x4 tents. I have several posts containing lots of information. I highly recommend them. I run 9 132qb per tent. I run mine at like 70-80% load in flower. Here’s a couple shots but I have it all in a post, with details of what I used if you want any information on my experience with these give a shout
Just to throw a bit of a curveball, consider tossing 2-315 watt CMH fixtures with 4200k bulbs in there. I'm a big fan of the UV-A and UV-B output as well as the efficiency of the units.
Just to throw a bit of a curveball, consider tossing 2-315 watt CMH fixtures with 4200k bulbs in there. I'm a big fan of the UV-A and UV-B output as well as the efficiency of the units.
Those are super nice. Heat. Cost to buy two is more than building. Bulb replacement. The stuff I have seen produced with those 315s is amazing as well. Those where my considerations, and why I ended up building what I did.
Those are super nice. Heat. Cost to buy two is more than building. Bulb replacement. The stuff I have seen produced with those 315s is amazing as well. Those where my considerations, and why I ended up building what I did.
Heat isn't too bad and I prefer running individual 315 fixtures on 20-22" centers than a 630 fixture with the bulbs almost butting ends. I think those 630 units create some "hot spots" if you will and if you run two rooms with rhe same wattage with the only difference being 630 watt fixtures and 315 watt fixtures, the 315's will dominate every time. Kind of like running 600's on tighter spacing in basements with height restrictions instead of 1000's
Those are super nice. Heat. Cost to buy two is more than building. Bulb replacement. The stuff I have seen produced with those 315s is amazing as well. Those where my considerations, and why I ended up building what I did.
The reason why I'm such a CMH slappy is because I've yet to come across a LED fixture that can produce UV and IR spectrums like the CMH. That's where you get all that bonus trichome/thc/terpene production from. If you really want to get into light/spectrum manipulation get yourself some UV-C output bulbs and run them for 15 minutes every hour. Just be sure to only run them when there are no people in the room. That UV-C is the wavelength that'll give you skin cancer with the quickness