singlorigin
- 46
- 8
one reason is i can get them in bulk . just decided to go with this ones , any better suggestions ?why OG kush?Have you grown this strain
This design was with 100 plants , made it less to 50 so i can move them a round.How are you gonna tend to anything the plants in the back need with no room to move back there?
Planing to make a bigger grow room for 50 plants OG Kush.
Room is completely sealed and speacly made for this grow.
1. Exhaust fan 3500m3/h with carbon filter
2. CO2 control with pressure sensor for keeping the right air flow. - https://growcontrol.de
3. Bluelab ph/tds meter for cloud connection .
4. 130 pcs of samsung F564B 3500 k in total 3000w
5. 10 pcs Mean Well HLG-320H-48A
6. Commercial size dehumidifier
7. 4 ventilation fans - two on the Flore and two in the sealing.
For growing i will use Canna nutritions .
Growing in HP Aeroponics system diy build - still looking to find the right pump.
100 pcs of 50 micron misters 2 for each plant.
200 L water reservouar with RO filter and and circulation pump to keep the flow 3 big air stones.
Any suggestion what to change ? can understand if the lights are not to much for 50 plants.
View attachment 846522
My grow is 5 m x 5 m .Also I think you wattage is way low. Your talking about 256 sqft and 3000w of light. That’s less than 12w per sqft. I’m only running 35 per sqft ft, that’s three times as much light for the same coverage. Not to be a downer but I think you need to review your lighting and the space you plan on using. If I am way off please correct me, as I’m not always right.
My grow is 5 m x 5 m .
The growing space aeroponic is 4.50 m x 3.50 m , i took a desigen for grow light from this guy -
Basically designed the same frame on each frame i have 750 w. Size of the frame 1.50 x 2.70 m and i get 185 w for 1m2 .
Still seems like your running half of what I would think
You would need. That’s still
Way under 35w per square ft. Gonfor it I just think you need to plan to have your lights much lower. I would maybe incorporate some quantum boards but that’s just me
Planing to make a bigger grow room for 50 plants OG Kush.
Room is completely sealed and speacly made for this grow.
1. Exhaust fan 3500m3/h with carbon filter
2. CO2 control with pressure sensor for keeping the right air flow. - https://growcontrol.de
3. Bluelab ph/tds meter for cloud connection .
4. 130 pcs of samsung F564B 3500 k in total 3000w
5. 10 pcs Mean Well HLG-320H-48A
6. Commercial size dehumidifier
7. 4 ventilation fans - two on the Flore and two in the sealing.
For growing i will use Canna nutritions .
Growing in HP Aeroponics system diy build - still looking to find the right pump.
100 pcs of 50 micron misters 2 for each plant.
200 L water reservouar with RO filter and and circulation pump to keep the flow 3 big air stones.
Any suggestion what to change ? can understand if the lights are not to much for 50 plants.
View attachment 846522
This design was with 100 plants , made it less to 50 so i can move them a round.
Not sure why people use exhaust fans , well I know the reasoning but from the growers I've worked with we never needed them. We kept the rooms sealed up tight and the air would just recirculate no new air was needed to be brought in. When u do that u need to keep refilling the room w co2 too. Never needed air stones as the feed cycles were enough to oxygenate the nutes.
Love that shit! I’m gonna borrow from your design for sure!I can tell you why I do it. It's way, way cheaper to operate and there is less shit to go wrong. Period.
My extraction fan controls my temp which means I dont need an AC at all for 10 months of the year. Or CO2 bottles or burners or monitoring equipment... Just a fan, and a digital temp controller.
Gotta have a good intake filter though. Mine is nearly hepa, filtrete 1900. It filters molds and bugs etc. The air circulation fan blades are clean after a cycle.
here is my homemade intake filter box outside the grow shed. Usually covered with another piece of plywood so only the bottom is open.View attachment 856366
I can tell you why I do it. It's way, way cheaper to operate and there is less shit to go wrong. Period.
My extraction fan controls my temp which means I dont need an AC at all for 10 months of the year. Or CO2 bottles or burners or monitoring equipment... Just a fan, and a digital temp controller.
Gotta have a good intake filter though. Mine is nearly hepa, filtrete 1900. It filters molds and bugs etc. The air circulation fan blades are clean after a cycle.
here is my homemade intake filter box outside the grow shed. Usually covered with another piece of plywood so only the bottom is open.View attachment 856366
So you dont use c02? How is there less "shit to operate "? Bring air in and out of the room in itself is adding more shit to do..potential issues even w filters. But since u have no c02 then you dont need to refill them each time. But c02 is critical and an absolute must to exhault the genetic properties of any stain . Anyway that's another topic. Well whatever works we all have our ways...n most all work
Every grow in the world uses co2.. doesn’t matter if the plants get it from plenty of moving air or from a bottle or burner. If it means not having to use a/c why not use fresh air? I use a/c maybe a month a year. My gpw is pretty dang high when I don’t have to factor in the power used on a/c and I don’t buy bottles o co2So you dont use c02? How is there less "shit to operate "? Bring air in and out of the room in itself is adding more shit to do..potential issues even w filters. But since u have no c02 then you dont need to refill them each time. But c02 is critical and an absolute must to exhault the genetic properties of any stain . Anyway that's another topic. Well whatever works we all have our ways...n most all work
You will find some stuff is lost in translation with our American friends here.. pretty sure someone from Florida or AZ can’t even comprehend that someone where I live doesn’t need a/c and even welcomes hid heat half the year or more.Right, no Co2 added to my grow. My fan cycles on about every 10-15 min this time of year to keep temp between 22-26c. It changes the air plenty keeping C02 levels well adequate and comparible with the outdoors.
With a sealed Co2 system you are paying for an AC and dehu to run constantly ($$$), You are paying for Co2 and constantly changing bottles or tanks,... You're dependent on zero air leaks and all that monitoring equipment to be working properly... Just doesnt seem worth it to me. And I weighed the idea quite heavily designing my shed.
This is all grown just from sucking air through the shed. Seems to be doing just fine without added Co2.View attachment 856377 View attachment 856379 View attachment 856378 View attachment 856380
You will find some stuff is lost in translation with our American friends here.. pretty sure someone from Florida or AZ can’t even comprehend that someone where I live doesn’t need a/c and even welcomes hid heat half the year or more.
I’ve found Canadian vs American grow styles are different out of necessity of te environment there in
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?