J
John Francis
- 5
- 3
Strains (from clone stock):
Alien Dawg
Purple D
Grapefruit Diesel
OG Kush
Critical Yumbolt
This is being posted all across the web, and I'm going to be monitoring all of the threads. I may end up closing some and directing people to other forums, if some threads aren't producing results. I need a fair amount of advice, especially with chilling.
My history.
I've only ever brought one set of plants to harvest, and there were only two or three females in the bunch. But it was aero, I got around .56g/watt, and it was some of the most dense, oily buds that I've ever smoked. Possibly the most potent I've ever had - but I won't get ahead of myself, because I'm an amateur and I can't forget that. My last grow was 250w with a grow space of 20"x16"x28". This grow has 200x the lighting. I'm an amateur and I'll need help.
Current grow info:
I've got no experience with an grow of this size. I've budgeted around $5000 a month for power.
I already killed a fuckload of clones through PH, temperature, and mold issues. PH and mold has been mostly resolved. Temps should be more acceptable now too. The cloners also don't leak light inside anymore, which should help as well. I'm currently using 4ml/gal of ThriveAlive B-1 Red and RO water, at 70-75f. It should be fine there. Pump and 100w of florescent lights are running 24/7, primarily to keep the res at that temp. Clones were previously in a veg room with temps around 68-69F, with mold and unPH'd water for a while, and they were taking too long to root.
My RO filter membrane died already - not unexpected, as I have non-potable 1500ppm source water and it's a Hydrologic Evolution unit that I was using for kitchen, shower, and grow water. I'm not sure if my water softener works right either. I'm back to purchased water for my clones, but I'm going to put down a few thousand, hopefully this week, on a commercial RO system. Advice in that area could be used, but I've now got a local supplier that seems to know his shit, for the most part. Budget is $4-5k.
I've made more than a few amateur fuckups so far - buying 15mm thick light extension cables rather than a spool of wire, letting my roots rot when my budget got held up, ignoring an unknown white mold infection on stems/hydroton(now treated, not P.M.) and continual issues with rooting clones (cloners have now been remodeled though and lots of new ones were cut within the last three days).
I can't afford to make similar mistakes on expensive shit like AC units and chillers - but I also can't afford to continually delay start-up.
We're running at 10% lighting capacity right now, planning to move up to 20% this week. I don't have the electrical lines for more yet, but I will have 400A three phase ready to go within the week or two. We're just waiting on the power company, but I haven't set up the flowering rooms yet anyway.
This is going OPEN SOURCE. Thus, I'm planning to post this all over the web. Growery, Grass City, Cannabis.com, Cannabis Culture, RollItUp, ICMag, and THCFarmer.The custom built system I've designed is modular, as expandable as possible, with high reliability, low cost, and easy modifications. It's so simple, you could even run it in a greenhouse. Pics/details soon.
I'm running SOLIS-TEK dimmable digital ballasts, so the total lighting will actually be "55kW" at full capacity.
I've got incomplete plans for water cooled CO2, water cooling for res + supplemental room chilling (+AC), likely battery backup for the pumps, commercial RO system, and probably some more fun stuff I forgot about or haven't thought of yet.
What I aim to build is a prototype of something much larger. I hope to show everyone why NASA grows in Aeroponics, and at the same time, I'm going to show you all how easily we can do it too. My goal is to first outgrow, and then be outgrown.
Areas of advice required:
- *Air conditioning.
- *Chilling. Looking for possibly a 5 horsepower unit with a small internal or external reservoir that I can use to pump chilled water through the whole house. Efficiency is required, because I'm paying for power. Alternatively, I could get a couple smaller units - but that's not what I want to do. Budget for this is around $5-8k, all in. I'm considering sourcing a bunch of aluminum motorcycle radiators from China as well for some modular room and possibly res cooling. Alternatively, I've got 1/2" copper pipe coils that could cool reservoirs.
- Air intake. I need large Hepa filters - I was thinking maybe that I could make a filter box with a frame and some furnace filters and then getting a 12" or whateverto pull through? I'm going to be exhausting 4 to 5 6" inlines from each flowering room (1 fan for 4-5 lights - sealed hoods). That will fuck with my CO2, which I have not set up yet, so I am interested in options for a completely sealed system. It'll be easier to advise in this area once I post pictures though.
- Spray painting plastic buckets - I've got a big ass air compressor on the deck that I haven't hooked up. I'm hoping to find some paint that works on plastics so I can paint all my buckets white. This will make a huge difference in res temps.
To clarify, I've got 10kW upstairs for veg and I'm going to put together two 20kW rooms on a couple of FlipBoxes (I already have the lights, ballasts, reflectors, hangers, ducting).
More details and pictures soon. Stay safe my friends. Please comment.
Alien Dawg
Purple D
Grapefruit Diesel
OG Kush
Critical Yumbolt
This is being posted all across the web, and I'm going to be monitoring all of the threads. I may end up closing some and directing people to other forums, if some threads aren't producing results. I need a fair amount of advice, especially with chilling.
My history.
I've only ever brought one set of plants to harvest, and there were only two or three females in the bunch. But it was aero, I got around .56g/watt, and it was some of the most dense, oily buds that I've ever smoked. Possibly the most potent I've ever had - but I won't get ahead of myself, because I'm an amateur and I can't forget that. My last grow was 250w with a grow space of 20"x16"x28". This grow has 200x the lighting. I'm an amateur and I'll need help.
Current grow info:
I've got no experience with an grow of this size. I've budgeted around $5000 a month for power.
I already killed a fuckload of clones through PH, temperature, and mold issues. PH and mold has been mostly resolved. Temps should be more acceptable now too. The cloners also don't leak light inside anymore, which should help as well. I'm currently using 4ml/gal of ThriveAlive B-1 Red and RO water, at 70-75f. It should be fine there. Pump and 100w of florescent lights are running 24/7, primarily to keep the res at that temp. Clones were previously in a veg room with temps around 68-69F, with mold and unPH'd water for a while, and they were taking too long to root.
My RO filter membrane died already - not unexpected, as I have non-potable 1500ppm source water and it's a Hydrologic Evolution unit that I was using for kitchen, shower, and grow water. I'm not sure if my water softener works right either. I'm back to purchased water for my clones, but I'm going to put down a few thousand, hopefully this week, on a commercial RO system. Advice in that area could be used, but I've now got a local supplier that seems to know his shit, for the most part. Budget is $4-5k.
I've made more than a few amateur fuckups so far - buying 15mm thick light extension cables rather than a spool of wire, letting my roots rot when my budget got held up, ignoring an unknown white mold infection on stems/hydroton(now treated, not P.M.) and continual issues with rooting clones (cloners have now been remodeled though and lots of new ones were cut within the last three days).
I can't afford to make similar mistakes on expensive shit like AC units and chillers - but I also can't afford to continually delay start-up.
We're running at 10% lighting capacity right now, planning to move up to 20% this week. I don't have the electrical lines for more yet, but I will have 400A three phase ready to go within the week or two. We're just waiting on the power company, but I haven't set up the flowering rooms yet anyway.
This is going OPEN SOURCE. Thus, I'm planning to post this all over the web. Growery, Grass City, Cannabis.com, Cannabis Culture, RollItUp, ICMag, and THCFarmer.The custom built system I've designed is modular, as expandable as possible, with high reliability, low cost, and easy modifications. It's so simple, you could even run it in a greenhouse. Pics/details soon.
I'm running SOLIS-TEK dimmable digital ballasts, so the total lighting will actually be "55kW" at full capacity.
I've got incomplete plans for water cooled CO2, water cooling for res + supplemental room chilling (+AC), likely battery backup for the pumps, commercial RO system, and probably some more fun stuff I forgot about or haven't thought of yet.
What I aim to build is a prototype of something much larger. I hope to show everyone why NASA grows in Aeroponics, and at the same time, I'm going to show you all how easily we can do it too. My goal is to first outgrow, and then be outgrown.
Areas of advice required:
- *Air conditioning.
- *Chilling. Looking for possibly a 5 horsepower unit with a small internal or external reservoir that I can use to pump chilled water through the whole house. Efficiency is required, because I'm paying for power. Alternatively, I could get a couple smaller units - but that's not what I want to do. Budget for this is around $5-8k, all in. I'm considering sourcing a bunch of aluminum motorcycle radiators from China as well for some modular room and possibly res cooling. Alternatively, I've got 1/2" copper pipe coils that could cool reservoirs.
- Air intake. I need large Hepa filters - I was thinking maybe that I could make a filter box with a frame and some furnace filters and then getting a 12" or whateverto pull through? I'm going to be exhausting 4 to 5 6" inlines from each flowering room (1 fan for 4-5 lights - sealed hoods). That will fuck with my CO2, which I have not set up yet, so I am interested in options for a completely sealed system. It'll be easier to advise in this area once I post pictures though.
- Spray painting plastic buckets - I've got a big ass air compressor on the deck that I haven't hooked up. I'm hoping to find some paint that works on plastics so I can paint all my buckets white. This will make a huge difference in res temps.
To clarify, I've got 10kW upstairs for veg and I'm going to put together two 20kW rooms on a couple of FlipBoxes (I already have the lights, ballasts, reflectors, hangers, ducting).
More details and pictures soon. Stay safe my friends. Please comment.