Can anyone help with what is wrong

Shayne010944 · Oct 18, 2021

Do these look normal ?

I think I’m in about week 7 of flower and the plants have gotten heat and probably light stressed from being to close .

are these all foxtailing ? Or am I just being impatient and they will all fatten up ?

I can see trichomes but they look like they are either just appearing or have been burnt . I’m. Not sure .

I did have to do bending when they were in flowrer cause I ran out of height

Shayne010944 · Oct 18, 2021

I think I’ve ruined them . Does anyone suggest to pull and start over or keep it going ?

Shayne010944 · Oct 18, 2021

60,000lux if that sound correct ? Just used a app to measure.

Shayne010944 · Oct 18, 2021

Anyones thoughts on what to do here ?

Aqua Man · Oct 18, 2021

They look like a while to go yet.

You using any bud hardeners, finishers, bulking products by chance?

Shayne010944 · Oct 18, 2021

Aqua Man said:
They look like a while to go yet.

You using any bud hardeners, finishers, bulking products by chance?

Using liquid weight, rezin . Massive bloom all from green planet mate

Aqua Man · Oct 18, 2021

Shayne010944 said:
Using liquid weight, rezin . Massive bloom all from green planet mate

Ok looked like there was some PGRs there. I'm ot sure about the liquid weight or resin but massive has triacantonal. But thats not what I'm seeing.

Almost looks like a synthetic PGR. Longer pistils and fewer trichomes.

Looks like they have been getting g to much N and need more K.

What are you growing in and how much of what are you feeding them?

Any chance you had a timer mishap or lights stayed on?

Shayne010944 · Oct 18, 2021

Nah def not a timer issue or lights staying on .

im growing in coco with perlite

using 1/2 strength 1.5ml litre
Dual fuel 1 and 2
rezin 2 ml litre
Liquid weight 1.5ml litre
Massive bloom 5 ml litre

all I have mentioned half that ML

also add pk spike once every 1-2 weeks at half strength 1ml per litre

been feeding at 1.0 to 1.2 ec

I was feeding at 1.6 but backed off when they burnt

Aqua Man · Oct 18, 2021

Shayne010944 said:
Nah def not a timer issue or lights staying on .

im growing in coco with perlite

using 1/2 strength 1.5ml litre
Dual fuel 1 and 2
rezin 2 ml litre
Liquid weight 1.5ml litre
Massive bloom 5 ml litre

all I have mentioned half that ML

also add pk spike once every 1-2 weeks at half strength 1ml per litre

been feeding at 1.0 to 1.2 ec

I was feeding at 1.6 but backed off when they burnt

You letting em dry back?

Shayne010944 · Oct 18, 2021

Nah def not a timer issue or lights staying on .

im growing in coco with perlite

using 1/2 strength 1.5ml litre
Dual fuel 1 and 2
rezin 2 ml litre
Liquid weight 1.5ml litre
Massive bloom 5 ml litre

all I have mentioned half that ML

also add pk spike once every 1-2 weeks at half strength 1ml per litre

been feeding at 1.0 to 1.2 ec

I was feeding at 1.6 but backed off when they burnt

Aqua Man said:
You letting em dry back?

im trying not too but by the time I water on lights on the tops are dry .

mind you the new spider 4000 I put in they were too close to it , ran out of height . But I have backed off to %70 intensity and bent the tops down .

the burning of leaves seems to have stopped . Maybe I stunted them ? Just seems like the white pistils are not doing anything and there isn’t frost everywhere jewellers loops shows small trichomes but not full raised ones

Aqua Man · Oct 18, 2021

Shayne010944 said:
Nah def not a timer issue or lights staying on .

im growing in coco with perlite

using 1/2 strength 1.5ml litre
Dual fuel 1 and 2
rezin 2 ml litre
Liquid weight 1.5ml litre
Massive bloom 5 ml litre

all I have mentioned half that ML

also add pk spike once every 1-2 weeks at half strength 1ml per litre

been feeding at 1.0 to 1.2 ec

I was feeding at 1.6 but backed off when they burnt

im trying not too but by the time I water on lights on the tops are dry .

mind you the new spider 4000 I put in they were too close to it , ran out of height . But I have backed off to %70 intensity and bent the tops down .

the burning of leaves seems to have stopped . Maybe I stunted them ? Just seems like the white pistils are not doing anything and there isn’t frost everywhere jewellers loops shows small trichomes but not full raised ones

What's the flower time on that strain.

Do you measure the runoff ph and ppm?

Shayne010944 · Oct 18, 2021

Aqua Man said:
What's the flower time on that strain.

Do you measure the runoff ph and ppm?

I have no idea of the strain I threw heaps off seeds in originally.

I measured ppm out and it’s around 1.2 sometimes 1.4 . Haven’t measured the ph of run off though

Aqua Man · Oct 18, 2021

Shayne010944 said:
I have no idea of the strain I threw heaps off seeds in originally.

I measured ppm out and it’s around 1.2 sometimes 1.4 . Haven’t measured the ph of run off though

Sounds reasonable to me. What ratios are you feeding?

Shayne010944 · Oct 18, 2021

Aqua I feed with every watering event. Always nutrients if that’s what you mean ?
I can only get in there to water once a day at lights on .

temp is.sitting at 26 degrees tonight . Still have plently of leaves that are healthy green. So not all of them are burnt . Just hoping to get to the end on this one as if they do fill out and fatten up there will be heaps

Aqua Man · Oct 18, 2021

Shayne010944 said:
Aqua I feed with every watering event. Always nutrients if that’s what you mean ?
I can only get in there to water once a day at lights on .

temp is.sitting at 26 degrees tonight . Still have plently of leaves that are healthy green. So not all of them are burnt . Just hoping to get to the end on this one as if they do fill out and fatten up there will be heaps

I was more wondering g is the nitrogen is still high or if you made a reduction in N and switched to bloom

growsince79 · Oct 18, 2021

Shayne010944 said:
60,000lux if that sound correct ? Just used a app to measure.
View attachment 1179876

Too much light. I know a lot of fake news - copy and paste -regurgitated internet weed sites recommend it. But imo 60k with good leds is too much for most plants.

Aqua Man · Oct 18, 2021

growsince79 said:
Too much light. I know a lot of fake news - copy and paste -regurgitated internet weed sites recommend it. But imo 60k with good leds is too much for most plants.

I agree. I run 1200ppm of co2 and pretty dialed in most of the time and 65-70k is pushing most genetics really hard and they definitely show stress. Without co2 I would say 40k-50k depending in strain you may get to 60k but that's dialed right in with a plant that loves light.

Shayne010944 · Oct 18, 2021

Aqua Man said:
I was more wondering g is the nitrogen is still high or if you made a reduction in N and switched to bloom

Hi Aqua .

so here is the schedule i was following. my max e.c i took it to was 1.4 as i was being cautious this time.

I dropped it to 1.0ec after the burn. and am now slowly bringing it up to 1.2

as for ratios they are dual fuel and say to do it evenly throughout the whole grow as per below

pbog · Oct 18, 2021

Thats an odd looking strain. Looks very sativa to me. I don't think its your growing technique. For week 7 those nugs look extremely under developed but if its a haze or something with a long flowering time then I think ur still good.

Shayne010944 · Oct 18, 2021

pbog said:
Thats an odd looking strain. Looks very sativa to me. I don't think its your growing technique. For week 7 those nugs look extremely under developed but if its a haze or something with a long flowering time then I think ur still good.

hopefully its just a long flowering time - hope i havent stuffed them

Can anyone help with what is wrong

Can anyone help with what is wrong

Shayne010944

Shayne010944

Shayne010944

Shayne010944

Aqua Man

Shayne010944

Aqua Man

Shayne010944

Aqua Man

Shayne010944

Aqua Man

Shayne010944

Aqua Man

Shayne010944

Aqua Man

growsince79

Aqua Man

Shayne010944

Attachments

pbog

Shayne010944

Privacy & Transparency

Privacy & Transparency