C
cannasaurus
- 15
- 3
I just checked that site out. It is only for California and Nevada.Here's another place to get your card from I've used them myself, they are quite reliable and the process is fast so you shouldn't worry if you are in the area and you want to get your medicine quickly.
How much oil do you use per ounce of bud? I have read 1 cup, and also a half cup. Also how do you figure out the dosage? This is confusing because of the percentage is different with each strain, etc. Hopefully someone can help me with this. I have had good results with 1 cup per ounce. But I would like to have an accurate dose.You need more heat to decarb properly. Ive done a ton of experimenting with decarboxylation and had my results lab tested. Bake the pot in the oven at 260F for 50 min. The hot water bath isnt going to cut it.
In all the testing I've done 220F just isnt high enough. Done in the oven at 240 for 1.5hrs, 250 for an hour, 260 for 50 min, Ive even had good results with 280 for 45 min. Those temps will decarb properly.
This is a super concentrated MCT oil I made and I decarbed the product in the oven at 260F for 50 min. You will see nearly complete conversion and almost no CBN. And yes, lol it's almost 300mg THC per ml of MCT oil. It was further diluted from this point obviously. One drop of it on my tongue at this strength and I was blazed all night.
View attachment 858459
How much oil do you use per ounce of bud? I have read 1 cup, and also a half cup. Also how do you figure out the dosage? This is confusing because of the percentage is different with each strain, etc. Hopefully someone can help me with this. I have had good results with 1 cup per ounce. But I would like to have an accurate dose.
Thank you for your help. Its greatly appreciated.I dont do it that way. Because the only way to know for sure is test your pot in a lab, or trial and error.. The difference between 15% and 25% thc is quite a bit. And people dont realize how much variation there actually is in a given strain. The LPs I know can have the same pot come out anywhere from 18-27% depending on the grow.
I like dealing with absolutes. Tangible numbers I can multiply and divide. What i used to do (but dont anymore because of the stiff penalties in Canada now) is make a qwiso extract from the pot. We lab tested that and it usually came back at 85-90% cannabinoid. Now I do it with bubble hash that is 55-65%. I just take the cured extract and decarb it in the oven. then mix that with sunflower lecithin and MCT oil for edibles and drops, or coconut oil for capsules. It's easy to do the math because I know I'll have say, 8500mg THC per gram of extract used.
But to answer the question.. Do the math, say a strain has a THC% of 20, an ounce would be 5600mg of cannabinoid. assume roughly 15% loss to extraction you're at about 4700mg.
Assume you soak that ounce in a cup of coconut oil and manage to extract 220ml return, that would assume an extraction of roughly 20mg/ml of coconut oil.
..maybe lol.
How much oil do you use per ounce of bud? I have read 1 cup, and also a half cup. Also how do you figure out the dosage? This is confusing because of the percentage is different with each strain, etc. Hopefully someone can help me with this. I have had good results with 1 cup per ounce. But I would like to have an accurate dose.
Google wakeandbake.co she has a dosage calculator. Easiest one I’ve come across.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?