• Home
  • Forums
  • Medical Cannabis Cultivation
  • Current Culture 8xl grow journal

Current Culture 8xl grow journal

and so it begins... I took some tongue and groove two foot wide by 8 foot long by one inch thick, pink foam insulation panels and cut them in half. then I used the appropriate foam panel glue to glue the tongue and grooves together, and then glued and...
Home › Forums › Medical Cannabis Cultivation › Grow Diaries › Current Culture 8xl grow journal
Grow diary eligible · Medical Cannabis Cultivation

Current Culture 8xl grow journal

by ken dog · Started Oct 13, 2013
1d
Running
0
Updates
71
Replies
1
Images
Overview Discussion 71 Gallery 1
Discussion below · 71 replies
Page 1 of 4 · Replies 1–20 of 72
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 13, 2013
#1
and so it begins...

I took some tongue and groove two foot wide by 8 foot long by one inch thick, pink foam insulation panels and cut them in half.
then I used the appropriate foam panel glue to glue the tongue and grooves together, and then glued and taped the top of the seams with blue painters tape.

I will use this as a base for the water proof containment area in case of a catastrophe.
I will glue 12 inch foam panels to the perimeter after I install the unit.
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 13, 2013
#2
first of the smaller box, then a picture of the larger box... send a picture of the first layout, to get all the buckets level.
 
Reactions: EventHorizan, tipper619sd and mastacheeser
Quote Reply

outwest

Supporter
Premium Gardener
Posts
4,629
Reactions
10,152
Joined
Dec 10, 2011
Points
263
Oct 13, 2013
#3
Bring it! Look forward to the show. What kind of genetics are going into the system?

outwest
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 13, 2013
#4
a couple of cherry berrys a couple of Maui Blue Dreams, maybe a Grape Ape and a Lemon Skunk. also an Indica Grapefruit, and an East Coast Sour Diesel...
I have 16 clones ready, I will use the best 8... and make new mothers out of the rest.
 
Reactions: outwest
Quote Reply

neverbreak

Posts
1,223
Reactions
1,589
Joined
Feb 20, 2012
Points
163
Oct 13, 2013
#5
nice setup bro, lookin forward to the show. pullin up a chair for this one.

neverbreak
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 15, 2013
#6
level and hooked up... Almost ready to fill with water.

I cannot emphasize the importance of having a level base... I had to raise one end up, over 3 inches.
 
Reactions: Confuten1, tipper619sd and mastacheeser
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 16, 2013
#7
so I finished all the connections, and added 50 gallons of water... Got to the bottom of the net pots.

I had two leaks... The first one was when I didn't seat the connecting pipe properly in one of the buckets.
the second one was at the exit of the epicenter, I'm telling you right now, once you get it set in place, do not move it back and forth at all.
it took me a while to find the sweet spot, but I finally stoped the leak... I can't imagine doing it on anything less than a perfectly level base... plus or minus 1/8 inch, maximum.
here's a pic.
 
Reactions: Confuten1 and tipper619sd
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 16, 2013
#8
by the way, I put a tarp underneath the entire thing... I highly recommend it.:)
 
Quote Reply

UCMENOW

Posts
1,095
Reactions
344
Joined
Dec 23, 2009
Points
83
Oct 17, 2013
#9
Float valves upside down.
 
Reactions: EventHorizan, tipper619sd and ken dog
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 17, 2013
#10
UCMENOW said:
Float valves upside down.
Click to expand...

thank you, I will fix it right away:)
 
Quote Reply

monkeymun

Posts
755
Reactions
923
Joined
Feb 2, 2012
Points
93
Oct 17, 2013
#11
That's a nice setup. Are you using LEDs?
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 17, 2013
#12
monkeymun said:
That's a nice setup. Are you using LEDs?
Click to expand...

yes on the flower, however on the veg, I will be using half and half, T-5 10,000K, 4 foot fluorescents (6 bulbs per light, 1 light for 2 plants), and LEDs (1 240 watt Super Veg per plant).
 
Quote Reply

cephalopoda

Posts
91
Reactions
99
Joined
Feb 6, 2012
Points
18
Oct 17, 2013
#13
just wondering why u are going fluro / led over hps for flower? is it to save on electricity? how u used that combo before for flower and if so how did u go?
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 17, 2013
#14
I've only grown with LED's... & I love the results.
to be fair though I have been using around 60-70 watts per square foot.

I have also flowered with 7 band LED lights that are designed primarily for veg, with excellent results.

I have not tried fluros before... this is an experiment, because my partner, (who has a grow of his own), has had excellent results with vegging and flowering with fluros...however, he uses primarily HID's for flowering, and does both hps and fluros for veg.

for him and I, I want to put the debate to bed... and see if there's any difference at all.

my partner and I went different routes for lights...I did not want to deal with heat, and I am a big fan of efficiency and high performance.
that said, LED's put out their good share of heat as well.:)
 
Reactions: reloader
Quote Reply

reloader

Posts
448
Reactions
947
Joined
Nov 6, 2010
Points
93
Oct 18, 2013
#15
Great set up ken, I can't wait to see this running like a Swiss watch. I am an hid guy, but I am interested in Led's. I have to admit I don't know a lot about them, so I'm interested to see how they do. You said you have only grown with led: What is your average gpw?
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 20, 2013
#16
reloader said:
Great set up ken, I can't wait to see this running like a Swiss watch. I am an hid guy, but I am interested in Led's. I have to admit I don't know a lot about them, so I'm interested to see how they do. You said you have only grown with led: What is your average gpw?
Click to expand...

I average about .4 grams per watt, every 47-50 days... in ebb and flow.

not the greatest, but at least it's quick.:)
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 20, 2013
#17
I'm not happy at all with my install... I need to redo it.
I am NOT confident that the leak in the epicenter will not return, due to my inability to make three points exactly level... two rows of buckets, and one epicenter.

I am a very skilled carpenter, and I am NOT happy with the results..

I have drained the system, disassembled everything, and started over.
I constructed a 43 inch by 10 foot 1 inch long base.
I will waterproof the inside with a tarp, and attach sides to the base to contain the water... in case of a catastrophe.
I also plan on setting the top off reservoir inside the base.

I will post some pictures later today, and show you the progress..
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 20, 2013
#18
... so here's what I did... I framed the base, squared it up, leveled it, and attached it to the floor.
I also moved the unit over to the right of the room, and moved my Maui Blue Dream recirculating bucket plant over to the far center of the room.
I did that so I could fit another unit in the same room, and so the lights will not interfere with the overhead fan as it is turning.
 
Quote Reply

neverbreak

Posts
1,223
Reactions
1,589
Joined
Feb 20, 2012
Points
163
Oct 21, 2013
#19
awesome bro, lookin forward to seein what ya pull off with these leds. how much was the outlay for 'em? they get pretty exy, right?

neverbreak
 
Quote Reply

ken dog

Posts
1,699
Reactions
2,202
Joined
Aug 29, 2013
Points
263
Oct 21, 2013
#20
neverbreak said:
awesome bro, lookin forward to seein what ya pull off with these leds. how much was the outlay for 'em? they get pretty exy, right?

neverbreak
Click to expand...

the ones from HTG Supply are really not too bad... If you get the 240 watt lights.

it's around $3 a bulb (for a 3 watt bulb)... Which is better than the average of about $4-$4.20 for other bulbs.

I have about 2,000 dollars worth of lights covering this unit....960 LED watts.
 
Reactions: neverbreak
Quote Reply
Page 1 of 4 · Replies 1–20 of 72
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last

Thread info

Replies 71
Views 10,353
Started Oct 13, 2013

Latest posts

  • D
    2026 Outdoor Grows! let's see em!
    • Latest: danmac69
    • 3 minutes ago
    General Outdoor Growing
  • D
    Please help, is this a male plant?!
    • Latest: Drdanky
    • 10 minutes ago
    Basic Growing Information
  • Greeeeetinggs!
    • Latest: Strainshow2.0
    • 16 minutes ago
    Introduce Yourself
  • 20% off ALL THCA Products for July 4th!
    • Latest: SeedSupreme
    • 27 minutes ago
    General Indoor Growing
  • Big Al’s 2025 season indoor/outdoor grow in misery
    • Latest: SeedSupreme
    • 32 minutes ago
    Grow Diaries
  • Home
  • Forums
  • Medical Cannabis Cultivation
  • Current Culture 8xl grow journal
  • Contact us
  • Terms and rules
  • Privacy policy
  • Help
  • Home
Community platform by XenForo® © 2010-2026 XenForo Ltd.
Menu
Log in

Sign up

  • Home
  • News
  • Classifieds
  • Forums
    • What's new Featured content New posts New Articles New articles New products Latest activity
  • Social
  • Strains
  • Live
  • Learn
  • Brands
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?