Diy 4cob Cxa3590

[AvidLerner]

Here is the new DIY 200W fixture running four CXA359072v with a mean well C700B driver driving each CoB at 49W each. Each CoB can run up to 135W, but efficiency lies here at 49W. peace

 

[ArcticOrange]

Lets see her in action!

 

[PhatNuggz]

Have you seen GroMau's YT video regarding a complete kit, also using anodized aluminum

 

[AvidLerner]

fired up and ready to go. sorry don't use video. gotta get better.

 

[AvidLerner]

Have you seen GroMau's YT video regarding a complete kit, also using anodized aluminum

Yes I have. I think it is nice. I like to design stuff, my style. I am finishing up my 400W (8) CXB3590 26V w/(2) C1400B on my batwing, also black and aluminum reveals. I will post up picks of that one when i am finished later. I go for more of a square shape vice a long rectangular shape. Works better for me, modular and convertible. I will post up picks of my remote driver setup. I use a 2x2 sheet of gypsum board, lighter and just as rugged as wood stuff. All drivers are remote mounted to keep all heat away from the family. thanks for the view. You guys rock, I am just a poor guy, from a poor family. easy come, easy go. peace

 

[basseye]

nice build :cool:

 

[keiksweat]

Y

Yes I have. I think it is nice. I like to design stuff, my style. I am finishing up my 400W (8) CXB3590 26V w/(2) C1400B on my batwing, also black and aluminum reveals. I will post up picks of that one when i am finished later. I go for more of a square shape vice a long rectangular shape. Works better for me, modular and convertible. I will post up picks of my remote driver setup. I use a 2x2 sheet of gypsum board, lighter and just as rugged as wood stuff. All drivers are remote mounted to keep all heat away from the family. thanks for the view. You guys rock, I am just a poor guy, from a poor family. easy come, easy go. peace

Do what with the plaster board?

 

[AvidLerner]

I mount my drivers remotely from the CoB's and use a gyp. bd panel for that with a rigid insulaiton bd for backing. peace.

 

[AvidLerner]

Here is my * COB CXB3590 with Far Red diodes. I changed out the three royal blue for far red because I am going to use this full time. It causes stretch but also fatter nugs. peace

 

[keiksweat]

Here is my * COB CXB3590 with Far Red diodes. I changed out the three royal blue for far red because I am going to use this full time. It causes stretch but also fatter nugs. peace

cool panel mate.how much it cost all in,with and without the reds and extra drives plz

 

[AvidLerner]

the (8) cxB3590 36v, 3500k CD bin $398, HLG-186H-C1400B $134, Chip Lok LED Holders, Lidel Reflector w/ lens and holder $200, Fans $30, heat sink $90, 12v/12w 1a LDD fan driver $12, 18 Far Red Leds $54, lpc-35-700 $17, plus $100 S&H, and tools, wire, paste, connectors, etc. aboout $1000 for 400-800w led light.

The (4) cxa3590 72v, 5000k, CD bin $280, HLG-185H-C700B $67, Chip Lok LED holder, reflector w holder and lens $100, Fan $15, heat sink $50, fan driver $12, S&H $50, about %524 for 200-400w led light.

 

[AvidLerner]

I also took out the three royal blue and added six more semiLed Far red for 18 total far red leds on the lpc-35-700 driver. i plan on keeping the far red on fr the entire flower time. I saw some outstanding results by a grower doing just that.

 

[keiksweat]

I also took out the three royal blue and added six more semiLed Far red for 18 total far red leds on the lpc-35-700 driver. i plan on keeping the far red on fr the entire flower time. I saw some outstanding results by a grower doing just that.

you say keeping the far reds on causes stretching?have you tried this before?

 

[AvidLerner]

you say keeping the far reds on causes stretching?have you tried this before?

no, but I saw anohter grower that did and it is manageable I think.