Rama777
- Posts
- 1,570
- Reactions
- 6,278
- Joined
- Oct 3, 2023
- Points
- 263
They do have moisture, but they release it slowly. It usually takes 7 to 10 days or even longer to dry. How fast it happens depends on the ambient heat and humidity. It's best for the buds to dry slowly.My question is if I can expect the drying tent to have higher humidity from the moisture release of the harvested branches? If so, is it like 3% or higher or more like 10%?
I don't think so. I don't use one with my drying tent, but I did think about it. I adjust the exhause fan. Slow it down for a slower dry.If it’s on the low end, is it safe to have a small humidifier going in the tent to keep it closer to 55%?
Cool thanks! Yeah a humidifier in the tent seems sketchy to me too.They do have moisture, but they release it slowly. It usually takes 7 to 10 days or even longer to dry. How fast it happens depends on the ambient heat and humidity. It's best for the buds to dry slowly.
I don't think so. I don't use one with my drying tent, but I did think about it. I adjust the exhause fan. Slow it down for a slower dry.
So would a humidity level of 55-58% be ideal to allow for a slight increase due to the plants releasing moisture?They do have moisture, but they release it slowly. It usually takes 7 to 10 days or even longer to dry. How fast it happens depends on the ambient heat and humidity. It's best for the buds to dry slowly.
I don't think so. I don't use one with my drying tent, but I did think about it. I adjust the exhause fan. Slow it down for a slower dry.
Try and keep it as close to 60degrees and 60% rh for 14 days.So would a humidity level of 55-58% be ideal to allow for a slight increase due to the plants releasing moisture?
Thanks Nate!Try and keep it as close to 60degrees and 60% rh for 14 days.
Yeah it’s tough, but I’d try and get it as close as you can. We can’t hit every key point and our areas and environments play a huge part. Just try and get as close to you can within recommendations and work with what ya have!I don’t think I’ll be able to hit 60 degrees much, but I can probably keep it between 65-69 degrees.
Well actually I may be able to do pull it off. Don’t thermostats typically bottom out around 68 or so? You can set yours down to 60?Yeah it’s tough, but I’d try and get it as close as you can. We can’t hit every key point and our areas and environments play a huge part. Just try and get as close to you can within recommendations and work with what ya have!
I have a dedicated lung room with an AC unit that helps me get my goals. But running it comes at a cost
I have a mobile AC unit that exhausts out a window. It’s bottom temps get to 61 and will get my lung room as cold as 56. Let me see if I can find you a link and I’ll edit the postWell actually I may be able to do pull it off. Don’t thermostats typically bottom out around 68 or so? You can set yours down to 60?
Hahaha I know the feeling, but it’s only a little bit throughout the process. It’s not like we are taking jets back and forth all dayI just realized that my coolbots for my walk in-coolers (I’m a produce farmer..) aren’t being used during the winter. I’ll pop my window AC in which I think bottoms out at 68 and just use the coolbot! 60 degrees will be no problem after all!
So I’ll have a window AC, a humidifier, a dehumidifier and now probably a small heater to keep all my tents happy. My god, I am not helping on the global warming front
I don't think the plants releasing moisture is a significant factor, unless there is a lot of plant material in a small space. I did a before and after weighing of the last buds I dried. The difference was 250 grams, or 8.9 ounces. So, slightly more than a cup of water was removed during the eight days of drying.So would a humidity level of 55-58% be ideal to allow for a slight increase due to the plants releasing moisture?
I had that same tent but had to scrap it after the zipper failed within a month. Got a refund fortunately.I don't think the plants releasing moisture is a significant factor, unless there is a lot of plant material in a small space. I did a before and after weighing of the last buds I dried. The difference was 250 grams, or 8.9 ounces. So, slightly more than a cup of water was removed during the eight days of drying.
What I think is most important, is air flow around the buds and avoiding drying them too fast. Buds don't dry evenly. The inside dries slower than the outside. So, I adjust the exhaust fan speed to control the rate of drying. Slower is better.
Here's a picture of the tent I've used for the last few grows. It works better than it looks. It evolves a little each time I use it. I might add a pan of water at the bottom. I also have plans to improve the air circulation.
The CO2 monitor in front shows the temperature is 62º and the RH is 50%. Those numbers are very consistent in this room during the cool months.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?