Grow No3 Auto Anesthesia

Megalith1 · Nov 8, 2017

So after to successful begginer grows i havw done away with my tent and converted a built in cupboard which measures 8foot high by 3.5foot wide with a depth of 3ft.
Just got the floor left to do then hang my lights which will be a mars 300w and a meizhi 600w.

so hopefully I will be popping seeds on Monday . In a soil medium probably canna pro plus and using the remaining biobizz nutrient line.
If anybody knows a thing or two about this particular strain please feel free to chime in as all advice is greatly appreciated

Megalith1 · Nov 12, 2017

So last night I petty much finish the room .
Installed intake and exhaust fans in roof and done floor now to add my mars 300w and we good to get them beans cooking

Megalith1 · Nov 16, 2017

Update 2 days ago I popped two seeds straight into some plant magic supreme in 15 litre pots which was watered to run off with 1ml per litre of rhizotonic and hey presto the little nuggets sprouted this morning .
So the journey starts lol

Dunge · Nov 16, 2017

Megalith1 said:
two seeds straight into some plant magic supreme in 15 litre pots which was watered to run off

Congratulations on the sprout.
Keep in mind that you have lots of saturated soil surrounding that little thing.
For the next few weeks the default condition will be over watered.
My thought is don't water at all, and when the plant looks like it needs water, apply very little at the base of the stem.
Don't want to be alarmist, but for the next month, your conically wet soil (anything without roots in it) will be anaerobic.
Lots of strange things can grow in there.
Good luck.

Megalith1 · Nov 17, 2017

Dunge said:
Congratulations on the sprout.
Keep in mind that you have lots of saturated soil surrounding that little thing.
For the next few weeks the default condition will be over watered.
My thought is don't water at all, and when the plant looks like it needs water, apply very little at the base of the stem.
Don't want to be alarmist, but for the next month, your conically wet soil (anything without roots in it) will be anaerobic.
Lots of strange things can grow in there.
Good luck.

Thanks for the advise im on my second auto run so I will do what I did last time and wait for soil to dry and then water a little around the stem and work outwards slowly as the grow (got 3.5 oz on the last run ) I will also be giving a light mist on lights off aswell

Megalith1 · Nov 19, 2017

So three days from breaking surface and we have some tidy progress .
Temps are 27.5 lights on and 20.8 lights off my rh is 45 - 55%
Today they had a first watering with ph 6.8 water and some rhizotonic to boot.
Just watered around the stem a little just so it was damp then circled outwards about two inches to try and encourage roots to search

Enforcer · Nov 19, 2017

Nice set up. I second everything Dunge said. Very easy to over water at this stage. Sounds like your well on your way. Good luck!

Megalith1 · Nov 19, 2017

Enforcer said:
Nice set up. I second everything Dunge said. Very easy to over water at this stage. Sounds like your well on your way. Good luck!

Only on my 3rd grow so still learning as I go but I take all advise on board and Taylor it to work for me
My babies 3 days into this world lol

Megalith1 · Nov 21, 2017

At day 5 from sprout
Soil was dry so gave some water with algamic and rhizotonic and as u can see they have grown a bit lol

Leew421 · Nov 21, 2017

I would scrap all that Mylar. Go with a nice flat white. Even poster board. You will get heat spot from the reflection

Megalith1 · Nov 21, 2017

Leew421 said:
I would scrap all that Mylar. Go with a nice flat white. Even poster board. You will get heat spot from the reflection

Will have to suck it and see this go as funds are directed to Christmas now lol
Change it next go

Leew421 · Nov 21, 2017

Werd. Like I said a poster board that's white will work too. Walmart special

Megalith1 · Nov 25, 2017

We are now on day 9 from sprout and since last update they have grown quite a bit .
Temps are fine but had to introduce a humidifier to raise my rh as it kept dropping to 20%

Megalith1 · Nov 29, 2017

So day 12 from breaking soil and I've now introduced bio grow into the mix at 0.75ml per litre and they have taken it well with no signs of nute burn.
I must say that this strain anesthesia is definitely a shorty because they are both so compact with very tight spacing between nodes so far.

Megalith1 · Nov 29, 2017

Today' pics

Megalith1 · Dec 3, 2017

So we now on day 16 from sprout ...watered today with 12ml of rhizotonic and 5ml of algamic and so far the girls are looking healthy.
They are both bushy and compact which must just be a trait of this strain

Megalith1 · Dec 10, 2017

Day 23 from sprout ....all going well so far but I can' get over how bushy these girls are .
Now the question I got is do I give a tiny trim to open them up?
I know they are autos which a trim might not be appropriate lol , advise welcome

Megalith1 · Dec 30, 2017

Haven' posted for a bit but all is well
We are on day 43 since sprout and I have switched to bio bloom and topmax with the occasional dash of cal mag.
They are starting to smell rather Spicey photos was taken 2 days ago as I kind of don' disturb unless feeding/watering

Grow No3 Auto Anesthesia

Grow No3 Auto Anesthesia

Megalith1

Megalith1

Megalith1

Dunge

Megalith1

Megalith1

Enforcer

Megalith1

Megalith1

Leew421

Megalith1

Leew421

Megalith1

Megalith1

Megalith1

Megalith1

Megalith1

Megalith1

Privacy & Transparency

Privacy & Transparency