You should post this in cannabis johns AC thread.Are there any instructions in your ideal air literature or iponic literature about doing it?When in doubt read the instructions! @CannabisJohn or @blazer might be able to help.
Will do... I appreciate the help but there's no instructions on how to connect the two. The wiring diagrams don't coinside with each other. The main issue is where do I connect the black o/b wire from the mini split inside the Ipoic controller.
It's doable, you have to isolated the switched wires for the AHU blower and the contactor for the outdoor unit, the temp controller turns on the AHU and the compressor, you can select AHU to be on constantly or only when compressor is on. You need to use two of the relays inside the Iponic 614 and program them accordingly, just use the relays to switch the AHU and the compressor like it was a temp controller, I can post a wiring diagram if you want.
It's doable, you have to isolated the switched wires for the AHU blower and the contactor for the outdoor unit, the temp controller turns on the AHU and the compressor, you can select AHU to be on constantly or only when compressor is on. You need to use two of the relays inside the Iponic 614 and program them accordingly, just use the relays to switch the AHU and the compressor like it was a temp controller, I can post a wiring diagram if you want.