Help Need Connecting Iponic To Mini Split.

[youngabe]

I was wonding if anyone has ever hooked up an Ideal air 36000btu mini split up to the iponic 614? If so, can you walk me throuh how to.

 

[fishwhistle]

You should post this in cannabis johns AC thread.Are there any instructions in your ideal air literature or iponic literature about doing it?When in doubt read the instructions!
@CannabisJohn or @blazer might be able to help.

 

[youngabe]

Will do... I appreciate the help but there's no instructions on how to connect the two. The wiring diagrams don't coinside with each other. The main issue is where do I connect the black o/b wire from the mini split inside the Ipoic controller.

 

[Paul Simon]

I have installed a small army of mini-splits and am not a tech. I can answer some basic, specific questions if you have any.

 

[Olyver]

It's doable, you have to isolated the switched wires for the AHU blower and the contactor for the outdoor unit, the temp controller turns on the AHU and the compressor, you can select AHU to be on constantly or only when compressor is on. You need to use two of the relays inside the Iponic 614 and program them accordingly, just use the relays to switch the AHU and the compressor like it was a temp controller, I can post a wiring diagram if you want.

 

[John123451]

It's doable, you have to isolated the switched wires for the AHU blower and the contactor for the outdoor unit, the temp controller turns on the AHU and the compressor, you can select AHU to be on constantly or only when compressor is on. You need to use two of the relays inside the Iponic 614 and program them accordingly, just use the relays to switch the AHU and the compressor like it was a temp controller, I can post a wiring diagram if you want.

Can you include a diagra.

 

[Mtvrepair]

I have the same thing need to be able to connect this unit to my iponic614 any diagrams or help greatly appreciated
Ideal air 36000 btu unit pro