S
shittygrower69
- Posts
- 17
- Reactions
- 10
- Joined
- Jul 12, 2024
- Points
- 3
do you mean the sf 1000? or the generic lightI had this light for my first grow. It was ok but small harvest and marginal looking buds. ViparSpectre and Mars Hydro both are good reasonable choices, there are many great brands of lights. I would suggest to spend as much money on a light that you can afford. You will not be sorry.
This is what I am using with great results. There many really good lights available SF1000 is really 100 watts. More wattage and better lights produce better buds. These have worked well for me. Just my opinion. There are a lot of lights more expensive and better than mine. My goal was not to spend more than $1000 total since it is a hobby.
View attachment 2217614View attachment 2217616
This is what I am using with great results. There many really good lights available SF1000 is really 100 watts. More wattage and better lights produce better buds. These have worked well for me. Just my opinion. There are a lot of lights more expensive and better than mine. My goal was not to spend more than $1000 total since it is a hobby.
View attachment 2217614View attachment 2217616
so what would you recommend I do? I’m not sure I fully understand what you mean, sorry. You think I should cut a few off because 10 is too much? wouldn’t that lower my yield?So on the stems you currently have poking out new branches is where your colas are forming from now. You have 2 colas per node reaching upwards now. Dont chop on those unless you want to thin out your mainline. If you currently have 5 nodes per stem thats 10. 10 colas per stem currently. I think thats too much.
I found this video from HyperactiveHighs that says to "wait for the third and fourth node to grow and then you're going to cut above the third node. You're gonna remove the lower nodes and let the plant recover. This would bring you to 16 tops. Then do this again for 32." He says going above 32 or 64 will just end up with smaller buds. Does this sound right? You say I don't need more than 2 nodes so you agree I should cut the lower ones off but leave 2? I think I do want to top again for 16 total main colas.So ive never done a side by side myself. But ive followed a few growers that have increased their cola number to 32 or more beside a plant left mainlined at 8 cola. Ive only concerned myself with those that have done this in a tent with a similar setup to myself ( a 750w or bigger light). The yeild on the plants with more than 8 cola dont seem super impressive for my own personal gain. Im talking ive not seen a difference of more than a few oz per plant even with 2x as many colas. Im not sure if this is universal but i have seen this result with more than 1 grower in an indoor setting with a really big light.
So for real solid advise, the absolute best i can give you is watch a few more grow videos about it from start to harvest. See how a sucessful run is topped and defoliated. And then once you understand the strucure you are going for then trim your plant to look like that.
You have the mainline structure set. You need to look at the new growth to see where the nodes are. These new branches are going to be your colas. You dont really need more than 2 nodes.....
Ummmm. Youre close. Lol. I could point this out to you if i were there.
@Captspaulding
This guy is a mainline master. Make your shit look like his. Just use that.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?