Rickcin
- 153
- 43
I thought I needed one of these as well as a circulation fan in the tentI would say that one. You can have it with temp control or not. You may even be able to use it at a slow pace.
CLOUDLINE PRO T4, Quiet Inline Duct Fan System with Temperature Humidity VPD Controller, 4-Inch
Your source to create smart growing systems with components including advance grow tents, inline fans, clip-on fans, LED grow lights, and UIS™ controllers.www.acinfinity.com
In that size tent nah.... just make sure all the passives at the bottom are open. I'd also say the cloudline t4 is a good option.I thought I needed one of these as well as a circulation fan in the tent
Excellent, will do thank youIn that size tent nah.... just make sure all the passives at the bottom are open. I'd also say the cloudline t4 is a good option.
I’m back with a question: I was just reading some reviews on Amazon and there are some comments that the T4 fan does not move enough air when used with a carbon filter in a 2X4X6 foot high tent, which is what I have. Im wondering if these comments are validIn that size tent nah.... just make sure all the passives at the bottom are open. I'd also say the cloudline t4 is a good option.
I don't have the T4 but that sounds like they don't know what they are talking about. The T6 will suck the walls in on my 5x5x8 GorillaI’m back with a question: I was just reading some reviews on Amazon and there are some comments that the T4 fan does not move enough air when used with a carbon filter in a 2X4X6 foot high tent, which is what I have. Im wondering if these comments are validThanks
I guess the 6 inch would be better for the long haul but now I need to see if they adapt to a 4 inch filter.For extraction fan in my 2x4x6ft tent I went for a 6 inch AC Infinity, this way I could keep it at setting 2-3 and not hear it in my bedroom, also handy now that I have upgraded to a bigger tent
For oscillating fans I would suggest spending a few quid extra on a silent one.
For a 2x4 tent I don't never been an issue.I guess the 6 inch would be better for the long haul but now I need to see if they adapt to a 4 inch filter.
‘Regarding an oscillating fan, Aqua Man feels I don’t need one with an AC infinity fan.
Good point regarding the fan since mines near the top of the tent near the filter discharge air.I have a t6 pulling air out of two 4x4 tents and it’s not quite on high. I think 6 of 8 speeds and it’s still sucking in the sides with the vents open. I recommend it. Like Aqua said you’ll be fine with just the in-line but if you scrog I would consider putting in a small clip fan opposite your vents. Helps the pots dry more evenly. The ones near the intake vents usually dry quicker. Also i imagine if you rig a 4 inch filter to a 6 inch fan it will not be able to run to its full potential due to a lower cfm rating. Keep it on the lowest setting to be safe. Whatever you do just make sure the fan you get has got a speed control.
it depends on your budget.Good point regarding the fan since mines near the top of the tent near the filter discharge air.
Is there a specific fan you recommend? Most lol of the ones I see look like junk.
Understood, but most of what I see on Amazon is really cheap so I’m thinking there are not many better options in the 6 inch size since there is little demand for ones that small. There’re basically “throw away” fans!it depends on your budget.
Understood, but most of what I see on Amazon is really cheap so I’m thinking there are not many better options in the 6 inch size since there is little demand for ones that small. There’re basically “throw away” fans!
Hey hey now those are nice looking fans. Thanks for sharing this. I will have to get one myself.Growbuds 6 Inch Grow Tent Oscillating Clip-On Fan
Actually... that's a pretty smart move, buying these fans for your grow room. Nothing says "I care" more than keeping the ladies in a well-ventilated and comfortable environment. Made with the highest quality materials, specifically designed to fit on grow tent poles to perfection and oscillate...www.wegrowbuds.ca
I do know the T4 isn't near the fan the T6 is . . . I don't know about cfm and such, however I tried using the T4 as an intake with the T6 & filter as exhaust in a cheap Vivosun 4x4. The T6 will suck the walls in running at 3-4 with the T4 running full blast without a filter. Switched the T4 for a Raxial 6" set up with a basic HVAC filter as intake and I'm much happier with the results.I don't have the T4 but that sounds like they don't know what they are talking about. The T6 will suck the walls in on my 5x5x8 Gorilla
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?