2Bad
- Posts
- 3,418
- Reactions
- 3,822
- Joined
- May 14, 2021
- Points
- 263
Personally I put in a closet with the door cracked and have a small fan oscillating outside of it giving indirect air . Many ways to do it I'm sure.
Personally I put in a closet with the door cracked and have a small fan oscillating outside of it giving indirect air . Many ways to do it I'm sure.So I had temp and humidity to the T but I didn’t have air circulation.. should I have my exhaust on still?
I dried whole plant then trimmed. It seemed about right dryness, obviously tried it right away and big difference after a few month of curing, but I did mess something up
My post wasn't directed at you in particular. Moreso most all newbs don't understand that the dry and cure portion of the grow is just as important as the cultivation part.So I had temp and humidity to the T but I didn’t have air circulation.. should I have my exhaust on still?
I dried whole plant then trimmed. It seemed about right dryness, obviously tried it right away and big difference after a few month of curing, but I did mess something up
what ppfd and or dli are you running here? we're hitting 31 constantly in peak summer if no ac running, the ones that don't respond well to my climate/parameters get culled quick. can see no visible stress on your plants no. it's a beautiful cultivar you got growing there.hey everyone I have Super lemon haze and gorilla glue I checked on today and noticed temps just over 90 degrees. 4th week of flower and I would assume it’s been this hot for a week or two since I put my sf7000 on 75% power. Any signs of stress you guys see??
So I don’t have any light meters maybe I should grab one, I definitely got it below 80 now, fan up a little and light down a touch. Thanks!what ppfd and or dli are you running here? we're hitting 31 constantly in peak summer if no ac running, the ones that don't respond well to my climate/parameters get culled quick. can see no visible stress on your plants no. it's a beautiful cultivar you got growing there.
*have found the majority or plants to display heats stress at temp of 92-93f and above.
fiance has a flagship galaxy which takes dli readings accurately when compared to manufacturers chart and iphone xs, iphone 12 using the Photone app. we got fan oscillating over canopy and another running down the hid reflectors and extracted through ceiling ventSo I don’t have any light meters maybe I should grab one, I definitely got it below 80 now, fan up a little and light down a touch. Thanks!
I've got a quantum light meter and its fairly expensive. Now before you run out and buy one, do you have a smart phone? If so, there's smart phone apps for free that can be pretty accurate depending on your phone's hardware capabilities. A free app like PPFD Meter would save you a bit of cash and would be good enough to keep you in the ballpark with your light output.So I don’t have any light meters maybe I should grab one, I definitely got it below 80 now, fan up a little and light down a touch. Thanks!
Yep I use the Photone app, I don’t trust them 100% they are free after all, but I use it to get in the range I want to be and adjust the light to the response of the plants from that pointI've got a quantum light meter and its fairly expensive. Now before you run out and buy one, do you have a smart phone? If so, there's smart phone apps for free that can be pretty accurate depending on your phone's hardware capabilities. A free app like PPFD Meter would save you a bit of cash and would be good enough to keep you in the ballpark with your light output.
Sooo runoff showing more than 1000 ppm on 3 of 4 plants, 4th plant showing 500.Hey guys I have one plants that’s getting some discoloration, other 3 seem fine for now.. any ideas? I’ll get ppm readings in a bit, 900 or so going in every feeding
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?