seaslug
- Posts
- 481
- Reactions
- 623
- Joined
- Dec 27, 2013
- Points
- 93
I finally got around to fixing my Lumigrows with bum fans.
The ES 330 early revisions use (3) 60x60x25mm, dual ball bearing Orion. (My problem here was a poorly assembled connector.)
OD6025-24HB; 24V, 0.15A, 25cfm, 3800rpm
To replace, remove all twelve fan guard bolts and the blue center plate comes loose.
The 92mm fans I've seen in Lumigrow units are Sunon "maglev" with vapo-shit bearings or sumthin'. Ribbed frame fans should have been used, besides.
ME92252V1-0000-A99, same as ME92252V1-000U-A99
24V, 2.1W, 51.5cfm, 3000rpm
Here are two 92mm replacement fans that are designed to be "through bolted", ribs reinforce the flanges:
The ES 330 early revisions use (3) 60x60x25mm, dual ball bearing Orion. (My problem here was a poorly assembled connector.)
OD6025-24HB; 24V, 0.15A, 25cfm, 3800rpm
To replace, remove all twelve fan guard bolts and the blue center plate comes loose.
The 92mm fans I've seen in Lumigrow units are Sunon "maglev" with vapo-shit bearings or sumthin'. Ribbed frame fans should have been used, besides.
ME92252V1-0000-A99, same as ME92252V1-000U-A99
24V, 2.1W, 51.5cfm, 3000rpm
Here are two 92mm replacement fans that are designed to be "through bolted", ribs reinforce the flanges: