Newty's AC Infinity Controller AI+ Thread

Mikedin · Feb 16, 2025

Man these controller seem pretty nice! I still haven’t even gotten around to the controller 69’s yet (I may soon will they go on sale now that these are out lol)

Was looking at that environments control setting to adjust light time bu outside factors by +/-1 min a day, I wonder would that eventually screw up photoperiods? If it kept drifting a minute a day?

One_Bell · Feb 16, 2025

Mikedin said:
Man these controller seem pretty nice! I still haven’t even gotten around to the controller 69’s yet (I may soon will they go on sale now that these are out lol)

Was looking at that environments control setting to adjust light time bu outside factors by +/-1 min a day, I wonder would that eventually screw up photoperiods? If it kept drifting a minute a day?

I would make sure to buy an ACI light as well. I did not, bought two adapters, did not work and if it would work I could only set the light on 10 different positions (10%-20%-30% and so on). I use a Mars Hydro, and while the app appears to be shite it does work for me in terms of a precize percentage and timerfunction.

I do have two sets ACI Ionbeams for undercanopy lightning and both sets are "one" light according to the controller, and these also have only 10 levels to set. Less fancy then I thought it would be, unfortunately.

BearWater · Feb 16, 2025

Mikedin said:
Man these controller seem pretty nice! I still haven’t even gotten around to the controller 69’s yet (I may soon will they go on sale now that these are out lol)

Was looking at that environments control setting to adjust light time bu outside factors by +/-1 min a day, I wonder would that eventually screw up photoperiods? If it kept drifting a minute a day?

Really like my 69 pro. I can set it and forget it for fiddle all day long. And change things on the fly! (Within reason) like I’m not changing the temp to my heater and stuff like that. But worth it. And getting a fan setup with them for a few hundy ain’t bad either

Natep · Feb 16, 2025

One_Bell said:
I would make sure to buy an ACI light as well. I did not, bought two adapters, did not work and if it would work I could only set the light on 10 different positions (10%-20%-30% and so on). I use a Mars Hydro, and while the app appears to be shite it does work for me in terms of a precize percentage and timerfunction.

I do have two sets ACI Ionbeams for undercanopy lightning and both sets are "one" light according to the controller, and these also have only 10 levels to set. Less fancy then I thought it would be, unfortunately.

I run model 69s in both of my 2x4s. One with a evo 3 and the other has 2 s22. I really like being able to control the lights from the controller. My 5x5 has a luxx 645 and you can only use a uis plug to control it. So I still use a mechanical timer.

Newty · Feb 20, 2025

Sorry again
I feel really bad, I'm usually very active..... Everytime I think I'm getting better, right back to feeling crappy a day later.....
Back to work tomorrow, let's see how that goes......

I will go back and read up and see what I can answer, truly am sorry.....

Just preorder a Soil Meter Sensor for the AI+, this is going to be a game changer!!!!!

Only thing that sucks is the AI+ only has 2 sensor ports, I'm using 1 for the normal temp/humidity probe and the other for the co2/light sensor. I'll have to ditch the co2 sensor for the soil moisture meter.
Wish I could use both but soil moisture is way more important IMO.

You can have self watering systems activate through the AI+ based on the Soil Moisture reading.

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

Monitor your soil saturation levels effortlessly with the AC Infinity AI Soil Sensor.

acinfinity.com

Newty · Feb 20, 2025

Mikedin said:
Man these controller seem pretty nice! I still haven’t even gotten around to the controller 69’s yet (I may soon will they go on sale now that these are out lol)

Was looking at that environments control setting to adjust light time bu outside factors by +/-1 min a day, I wonder would that eventually screw up photoperiods? If it kept drifting a minute a day?

I shut off the light adjustment based on outside climate, I want my lights on while I'm awake so I shut that off so it stays at my scheduled time.

Great question though, for someone that wants to utilize it it may bring problems but maybe not at only a couple minutes a day.
If the plants were outside, the sun comes up and sets at different times so as long as the plant is exposed to that from the beginning then maybe it will be fine.

BearWater · Feb 20, 2025

Newty said:
Sorry again
I feel really bad, I'm usually very active..... Everytime I think I'm getting better, right back to feeling crappy a day later.....
Back to work tomorrow, let's see how that goes......

I will go back and read up and see what I can answer, truly am sorry.....

Just preorder a Soil Meter Sensor for the AI+, this is going to be a game changer!!!!!

Only thing that sucks is the AI+ only has 2 sensor ports, I'm using 1 for the normal temp/humidity probe and the other for the co2/light sensor. I'll have to ditch the co2 sensor for the soil moisture meter.
Wish I could use both but soil moisture is way more important IMO.

You can have self watering systems activate through the AI+ based on the Soil Moisture reading.

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

Monitor your soil saturation levels effortlessly with the AC Infinity AI Soil Sensor.

acinfinity.com

just take care of you! : ) the farm is here and the weed isn’t going anywhere : )

That’s pretty sweet being able to set it up for self waterings using the sensor!

itgrower · Feb 20, 2025

Newty said:
Sorry again
I feel really bad, I'm usually very active..... Everytime I think I'm getting better, right back to feeling crappy a day later.....
Back to work tomorrow, let's see how that goes......

I will go back and read up and see what I can answer, truly am sorry.....

Just preorder a Soil Meter Sensor for the AI+, this is going to be a game changer!!!!!

Only thing that sucks is the AI+ only has 2 sensor ports, I'm using 1 for the normal temp/humidity probe and the other for the co2/light sensor. I'll have to ditch the co2 sensor for the soil moisture meter.
Wish I could use both but soil moisture is way more important IMO.

You can have self watering systems activate through the AI+ based on the Soil Moisture reading.

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

Monitor your soil saturation levels effortlessly with the AC Infinity AI Soil Sensor.

acinfinity.com

By self watering, I assume you aren't referring to the rope buckets. What system works with ACI AI Controllers?

Newty · Feb 20, 2025

itgrower said:
By self watering, I assume you aren't referring to the rope buckets. What system works with ACI AI Controllers?

No, it would not work with the rope buckets.
It would work with an automated SIP or Drip system.
In a drip system, you would have a submersible pump in a reservoir that feeds water to drip emitter on top of your pot, then you pair the pump with an ACI UIS outlet and when the Soil Meter sees the pot is dry, it will tell the UIS outlet to come on which will power your pump and it will run until the Soil Moisture meter reads proper level.
The dry and proper level will be triggers set in the Controller so you can specify how dry and how wet you want the pump to trigger on and off.

If you're in the states, The Bucket Company makes complete systems (you can build your own as well without buying bucket kit) that you pair with a pump and the Controller and it waters using the drip method.
In 1 of my tents I have the 6 bucket 3 gallon system, love it. The buckets are my favorite part, can't find another company who makes the same buckets.

The Bucket Company - Hydroponic Growing Supplies for Sale

The Bucket Company offers a wide selection of hydroponic supplies for all growing applications. From home gardens to commercial facilities, our range of products include automated growing kits, drain trays, and irrigation manifolds. Based in Michigan, USA.

www.thebucketcompany.com

Newty · Feb 20, 2025

One_Bell said:
Today I finally had time to try out some automations instead. While this is exactly what I needed (set time, temp and humidity for a period of time), it is not possible to set parameters for seperate devices. I need the inline fan running 24/7 at minimal speed 3 to get rid off the smell. You can adjust this parameter but it will be set for every device, so now my heater is also 24/7 on at a minimal setting of three...

You can set minimums for individual devices so the fan only runs 24/7, I have mine run 24/7.
See screen shot below.

Edit: I see you said Automations, post a shot of your Automations. You should be able to set each device to their own Automations individually so they don't have to share settings.

AC Infinity">

marzig · Feb 22, 2025

Is anyone having network problems with their AI controllers? I've been setting up a new tent and gradually adding equipment and getting a feel for the controller. I've noticed that when I power down the controller it reconnects with a different mac address. I've never had this issue with my 69 pro or 79. It's preventing me from turning on "access control" on my router.

Newty · Feb 22, 2025

marzig said:
Is anyone having network problems with their AI controllers? I've been setting up a new tent and gradually adding equipment and getting a feel for the controller. I've noticed that when I power down the controller it reconnects with a different mac address. I've never had this issue with my 69 pro or 79. It's preventing me from turning on "access control" on my router.

I don't power down my Controller when I add equipment, I plug in all the UIS stuff and the equipment to outlet last. It always reverts it to off anyways and never an issue doing it this way with any of their controllers.
I just always let my other equipment run (except humidifiers) while I setup new.
I'm curious though so I'll try powering down my controller and see what happens.

They just had a recent firmware update, are you running F12.4.27?

I just updated mine, I've been skipping it for a bit because it deletes all previous settings when updating firmware so you have to setup everything again after an update.
I really hope that changes in the future, the Controller 69 saves a backup so idk why the AI+ wouldn't.

marzig · Feb 22, 2025

Newty said:
I don't power down my Controller when I add equipment, I plug in all the UIS stuff and the equipment to outlet last. It always reverts it to off anyways and never an issue doing it this way with any of their controllers.
I just always let my other equipment run (except humidifiers) while I setup new.
I'm curious though so I'll try powering down my controller and see what happens.

They just had a recent firmware update, are you running F12.4.27?

I just updated mine, I've been skipping it for a bit because it deletes all previous settings when updating firmware so you have to setup everything again after an update.
I really hope that changes in the future, the Controller 69 saves a backup so idk why the AI+ wouldn't.

I just unplug it when I'm moving things around before I start a new grow. I live in an area that has frequent power outages and it takes about 30 seconds for my generator to power the house back up. I know the settings will be maintained but I'll have to go back into my router to reconnect it to wifi.

Yes I've done the firmware update.

One_Bell · Feb 24, 2025

Newty said:
You can set minimums for individual devices so the fan only runs 24/7, I have mine run 24/7.
See screen shot below.

Edit: I see you said Automations, post a shot of your Automations. You should be able to set each device to their own Automations individually so they don't have to share settings.

View attachment 2381559

I hope this helps:

Below you can see that is one min/max setting for all devices.

Should I make another automation without temp and humidity as a goal? I am losing sleep over this lol

LoveGrowingIt · Feb 24, 2025

Does this new controller run with the same phone app as the 69s? Does it play nicely with other controllers?

Newty · Feb 24, 2025

One_Bell said:
I hope this helps:

View attachment 2384017

View attachment 2384018

Below you can see that is one min/max setting for all devices.
View attachment 2384021

Should I make another automation without temp and humidity as a goal? I am losing sleep over this lol

Make an automation for each piece of equipment separately instead of grouping them together, that way you can have different settings for each piece of equipment.

AC Infinity">

Newty · Feb 24, 2025

LoveGrowingIt said:
Does this new controller run with the same phone app as the 69s? Does it play nicely with other controllers?

Yes, it uses the same app as the 69s. Everything seems to function fine together in the app

One_Bell · Feb 24, 2025

Newty said:
Yes, it uses the same app as the 69s. Everything seems to function fine together in the app

+1. You can add multiple devices in the app, already tried this with the 69pro and ai+.

Newty · Feb 26, 2025

Checked the mail tonight and found the Soil Sensor inside, thought it was on pre-order until March!!!
It's pretty late here so won't be able to see what it's all about tonight but I'll report back.
Pretty excited for it, I hope it's as good as I want it to be!

Quirky · Mar 16, 2025

Howdy all. New to the forum & back growing again after a hiatus of 20+ years.
After a fair bit of research I decided on aci equipment as I thought the automation would be a help as I’m a newb again. Now it has been an amazing help & things are running beautifully. Currently on AI Advanced & have a relatively good grasp on everything.
But to my question. When setting a target (temp/humidity, temp, humidity or vpd), is there a way to set separate targets for lights on & lights off. At my current level of understanding there is only one possible target setting regardless of light status. Am I missing something?

Absolutely stoked I stumbled across this forum. Some great knowledge being shared & hoping to fill in the blank spaces in my grow knowledge.

Newty's AC Infinity Controller AI+ Thread

Newty's AC Infinity Controller AI+ Thread

Mikedin

Living Soil Student

One_Bell

BearWater

If you were a hotdog would you eat yourself?

Natep

Newty

15% Off Fast Buds Orders, Code: NEWTY42

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

Newty

15% Off Fast Buds Orders, Code: NEWTY42

BearWater

If you were a hotdog would you eat yourself?

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

itgrower

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

Newty

15% Off Fast Buds Orders, Code: NEWTY42

The Bucket Company - Hydroponic Growing Supplies for Sale

Newty

15% Off Fast Buds Orders, Code: NEWTY42

marzig

Newty

15% Off Fast Buds Orders, Code: NEWTY42

marzig

One_Bell

LoveGrowingIt

Newty

15% Off Fast Buds Orders, Code: NEWTY42

Newty

15% Off Fast Buds Orders, Code: NEWTY42

One_Bell

Newty

15% Off Fast Buds Orders, Code: NEWTY42

Quirky

Newty's AC Infinity Controller AI+ Thread

Newty's AC Infinity Controller AI+ Thread

Mikedin

Living Soil Student

One_Bell

BearWater

If you were a hotdog would you eat yourself?

Natep

Newty

15% Off Fast Buds Orders, Code: NEWTY42

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

Newty

15% Off Fast Buds Orders, Code: NEWTY42

BearWater

If you were a hotdog would you eat yourself?

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

itgrower

AI Soil Sensor, for Moisture and Saturation Level Monitoring, IP67

Newty

15% Off Fast Buds Orders, Code: NEWTY42

The Bucket Company - Hydroponic Growing Supplies for Sale

Newty

15% Off Fast Buds Orders, Code: NEWTY42

marzig

Newty

15% Off Fast Buds Orders, Code: NEWTY42

marzig

One_Bell

LoveGrowingIt

Newty

15% Off Fast Buds Orders, Code: NEWTY42

Newty

15% Off Fast Buds Orders, Code: NEWTY42

One_Bell

Newty

15% Off Fast Buds Orders, Code: NEWTY42

Quirky

Privacy & Transparency

Privacy & Transparency