PipeCarver
Supporter
- 5,643
- 313
Ya, i don't really do much to them until they're big enough to spread out. Once her arms are big enough and I've transplanted her up to the final pot. I'll be vegging her another 6 weeks so I've lots of time to manipulate her shoots. after another topping or 2 all the shoots / arms should be close to the same height, if I can top them all then I'll have all the tops I can fit under this light. I don't have to flip this girl until I'm ready. I have plenty fish in the fire to keep me going. This is a test and only a test please stand by for future updates...lol ( a movie? A dream? an old radio ad? ) My old grey matter remembers that line from somewhere? Might have been the old 1960's bomb alert warning messages. l lolSee how many bends, allowing those bottom shoots to move up, then pulling down the top again. Never losing anything.
You might be best served by simply letting them only develop a few nodes, depending on how much light you can give any one plant, but certainly, it increases the budding sites.
Don't be afraid to remove some strategic fans either, to simply get some light to some sprouts underneath, there's more than one way to skin a cat bro.
View attachment 1173922View attachment 1173921
I'm only going to keep 1 plant under the sf1000 though to flower. As of tomorrow the other 3 go back into my other veg space under t5's & hps (though the day) then back under t5's for the night. I like to top to spread her out and keep them short. Topping also lets me cut clones off the lower shoots sooner than letting it just grow. I'm a topping nut MiMed tried to get me to just bend them over but nope...with scissors in hand I cut.I actually think with 4 plants, you simply may be better off letting them Christmas tree, instead of going for candlebra's, I'm not really sure. But I'm big on preserving and guiding the development of the root tip, I no longer top anything. I can build any shape simply with enough pruning, and leaf removal, if necessary. I also tuck a lot of big leaves under sometimes, so I don't have to remove them, and they can spread out, once the shoot is developed.
I have my veg room back so just this one Bubble Bomb clone from here on in. I had to take my good humidifier out and replace it with a little vaporizer. It has a pretty good regulator and I've got it holding at 62% now after adjusting again this am. Id like it at 65% if I can get the water will last overnight.I'm only going to keep 1 plant under the sf1000 though to flower. As of tomorrow the other 3 go back into my other veg space under t5's & hps (though the day) then back under t5's for the night. I like to top to spread her out and keep them short. Topping also lets me cut clones off the lower shoots sooner than letting it just grow. I'm a topping nut MiMed tried to get me to just bend them over but nope...with scissors in hand I cut.
I've transplanted her to a 3 gallon pot...I should have done that 10 days ago judging by the root wrapping I had going on. I noticed it stunting and lower fan leaves off colour.....duh......I'll have to transplant the rest of my girls same age same pots....they grow so quick these little ones, one day they're sprouts and your little babies the next thing yo know you're cutting their necks....funny that eh. ( notice I threw in some Cdn )I have my veg room back so just this one Bubble Bomb clone from here on in. I had to take my good humidifier out and replace it with a little vaporizer. It has a pretty good regulator and I've got it holding at 62% now after adjusting again this am. Id like it at 65% if I can get the water will last overnight.
Sept 7 looking goodI've transplanted her to a 3 gallon pot...I should have done that 10 days ago judging by the root wrapping I had going on. I noticed it stunting and lower fan leaves off colour.....duh......I'll have to transplant the rest of my girls same age same pots....they grow so quick these little ones, one day they're sprouts and your little babies the next thing yo know you're cutting their necks....funny that eh. ( notice I threw in some Cdn )
I have the light at 15" away with a lux reading close to 25,000. turned to 75%
Oct ? update I've been out of the loop for a while but everything is up and running well. My lonely Bubble Bomb is doing great. I've topped it again and I should now have 8 + the lower branches that have caught up. I think I'll go another week before I flip and let my cut tops grow new shoots.Well done~
I'm pretty new to leds. One thing I learned is all lux is not created equal. 15000lux led is like 20k cfl. The charts that recommend 60k+ must be for HPS in hydro with co2. I can't even get to 50k with my hlgs. I have also noticed the 4000k and 5000k leds can go closer than the 3000k leds. I'll bet thats why hlg quit making the straight 3000k spectrum. SF looks like its 2 - 5000k to every 1 - 3000k. The rspec is 1 to 1 3000 & 5000K. Your plants should flower good at 35-40k lux.Oct ? update I've been out of the loop for a while but everything is up and running well. My lonely Bubble Bomb is doing great. I've topped it again and I should now have 8 + the lower branches that have caught up. I think I'll go another week before I flip and let my cut tops grow new shoots.
I plan to tie her down now that her branches will reach the sides of the pots. I've been using shity clips in the past but I saw someone here drill holes in the pots lips and tie them....much better.
I was negligent in reading the manual and figured I could just wing it. I had my plant at 13" at 65% giving me a lux close to 25,000....I now see after reading they recommend 18" - 24 " for late vegging plants & 18" for blooming. There is no recommendation for lux readings. I see the chart but it doesn't really have the info I'm looking for or its not in a language I understand fully.
I now have my light 18" above my plant at 100% with a lux reading around 16,000 at the top...only 5,000 at the lower leaves. Both numbers seem too low and if it was with my t5's I'd have it 23,000 at the top and 15,000 at the lower leaves. The only way I can increase the intensity is to lower the light but doing so I come too close for the manufacturer recommended height.
Can anyone help me with this....?
Oct 20, I tied her down yesterday morning, by the evening before lights out it was up and looking perky. This morning it looks like it wants to get flipped. I think I will oblige her and go 12/12 tonight. I'm still not sure how to increase the intensity without burning her but I'll just let her grow into the light and watch for damage.Oct ? update I've been out of the loop for a while but everything is up and running well. My lonely Bubble Bomb is doing great. I've topped it again and I should now have 8 + the lower branches that have caught up. I think I'll go another week before I flip and let my cut tops grow new shoots.
I plan to tie her down now that her branches will reach the sides of the pots. I've been using shity clips in the past but I saw someone here drill holes in the pots lips and tie them....much better.
I was negligent in reading the manual and figured I could just wing it. I had my plant at 13" at 65% giving me a lux close to 25,000....I now see after reading they recommend 18" - 24 " for late vegging plants & 18" for blooming. There is no recommendation for lux readings. I see the chart but it doesn't really have the info I'm looking for or its not in a language I understand fully.
I now have my light 18" above my plant at 100% with a lux reading around 16,000 at the top...only 5,000 at the lower leaves. Both numbers seem too low and if it was with my t5's I'd have it 23,000 at the top and 15,000 at the lower leaves. The only way I can increase the intensity is to lower the light but doing so I come too close for the manufacturer recommended height.
Can anyone help me with this....?
Are you using silica?Oct 20, I tied her down yesterday morning, by the evening before lights out it was up and looking perky. This morning it looks like it wants to get flipped. I think I will oblige her and go 12/12 tonight. I'm still not sure how to increase the intensity without burning her but I'll just let her grow into the light and watch for damage.
No I stopped using it. everything was going well with my grows and I started using an Si product but I was having some leaf issues. I stopped using it and those leaf problems went away...Si ? who knows I may not have been using it correctly but I really didn't see an improvement in my plants from using it. I'm just using the GH trio + up & Kool Bloom for a few cycles in flower.Are you using silica?
Oct 23, I finely got around to changing my timer to 12/12. She has perked up and spread out after I bent her over and tied her down 4 days ago. It appears as though she likes it rough and is willing to do a little BDSM any time I need her to.......No I stopped using it. everything was going well with my grows and I started using an Si product but I was having some leaf issues. I stopped using it and those leaf problems went away...Si ? who knows I may not have been using it correctly but I really didn't see an improvement in my plants from using it. I'm just using the GH trio + up & Kool Bloom for a few cycles in flower.
Oct 26 She's doing great, nice colour and look of the leaves is healthy. 3 days after 12/12 she's looking fine. I need to feed her today and I lifted her up about 3" to get her in the 23,000 lux range. The humidity and temps have been right on without adding moisture but I noticed it down a bit today so I turned the vaporizer on about 1/4 of its range.Oct 23, I finely got around to changing my timer to 12/12. She has perked up and spread out after I bent her over and tied her down 4 days ago. It appears as though she likes it rough and is willing to do a little BDSM any time I need her to.......
I have my light18" above her and at 100%, with a lux reading at 18,000, I'll let her grow into the light as she stretches keeping an eye out for burning leaves.
Oct 29 There has been an upgrade in lighting. I now have the Se3000 up and running. It was easy to assemble and It took me about an hour to unpack, assemble and install. I like that it has a long cord from the light to the driver & dimmer so I was able to remove it from the light and attach it to a board on the outside of the room with my timers and power bars to keep it and the light board cooler.Oct 26 She's doing great, nice colour and look of the leaves is healthy. 3 days after 12/12 she's looking fine. I need to feed her today and I lifted her up about 3" to get her in the 23,000 lux range. The humidity and temps have been right on without adding moisture but I noticed it down a bit today so I turned the vaporizer on about 1/4 of its range.
Gooooooo~Oct 29 There has been an upgrade in lighting. I now have the Se3000 up and running. It was easy to assemble and It took me about an hour to unpack, assemble and install. I like that it has a long cord from the light to the driver & dimmer so I was able to remove it from the light and attach it to a board on the outside of the room with my timers and power bars to keep it and the light board cooler.
I hope I haven't screwed up by leaving a small red light on my little vaporizer I'm using for a humidifier. Today when I shut off the SF1000 the red light was on...I've duct tapped it up now but that's 4-5 days its been on since I flipped her...Time will tell.
I watered her today a I gave her 1 tbs Epsom salts / gallon and the run off gave me a Ph of 6.45 and PPM 725......just fine for now. I have the light at 80% - 19 " away from my plant giving me a lux reading on top of the canopy around 30,000.
I made the move to another page with my upgraded SE3000 titledGooooooo~
Got it~I made the move to another page with my upgraded SE3000 titled
#Spider Farmer SE3000 though flower
#Spider Farmer SE3000 though flower
I just received this SE3000 to flower a Bubble Bomb I grew with the help of a SF1000. Thanks goes to Spider Farmer for this opportunity to show off their lights. I have this girl 19" from the light turned to 80% giving me around 30,000 lux at the top. I've been feeding her General Hydroponics 3...www.thcfarmer.com View attachment 1190482
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?