Yeah i dont really like to mess with seeds that much because half the time you wont get anything actually worth while no matter how good of a grower you are. dont get me wrong i do love to play around with seeds every now and then but dont ever expect much.
but my set up is small. i have two tents that i use. one is a 32 inch by 32 in so just a little smaller than a 3x3 and i have a 300 watt
mars hydro fce3000 that i normally have some
ac infinity 16in ionbeam supplemental lighting
and then another tent that i normally use as my veg tent but i recently decided to use it as my flower tent, partially because im curious to see how a different light performs.
but its 2x3 tent thats meant to be one of those two in one tents so its supposed to have a separate sections with a divider in the middle that would make it a 2x2 main chamber with a 1x2 area for like clones but im using it just as a plain 2x3 and i have the
ac infinity evo 3 thats 280 watts and i may put the ionbeam in there but im not sure if i notice much of a difference in yield when using them under the 300 watt. also 300 watts in a tent thats less than a 3x3 is pushing it in my experience. i rarely have to use it at full power and when i do it burns the plants even with higher humidity and airflow and temperature. so even though the ionbeams are only 40 watts total, they tend to produce alot of heat which is already an issue in a garage during summer time with 580 watts total running.
The ionbeams and others similar are great for clones and seedlings though. i can use them all the way to 1 gallon pots and a month or so of veg. could probably use longer but the area for that is very small.
so even though i run 2 tents, i only have 1 exhause set up, i plan to get a splitter soon so i can pull air from both tents and run it through 1 filter. i have the
cloudline t6 which is a 6 inch exhaust.
i have pretty much a whole
ac infinity set up that i pieced together with my old tents and equipment. i won the controller ai on a youtibe giveaway but was using the controller 69 pro before that. Im new to thw whole automation. i took a break from growing for like 3 years and came back to all this automation for home grows which is awesome but not needed.
so i have the controller, evo 3, ionbeam supplemental lighting, humidifier, exhaust, an oscillating and a non oscillating fan i can have all hooked up to the controller.
i also have a 3000 sq ft dehu that is magical and will control humidity even though the garage isnt sealed.
but right now what this plant is under is the controller ai+ and the evo 3 at half power with the
cloudline t6 with the oscillating fan and a cheap clip fan and a small bladless fan on the floor.
any other questions feel free to ask. id love to get into the nitty gritty of it all
