MeanGreen420
- 628
- 93
Sorry I'll delete the other if that's possibleStop double posting. If someone has an answer they will answer your first thread.
Your genius thank youset your deadband for a high number like 600 to 700(if thats possible) and your setpoint to 900. the deadband # is what allows drift or co2 to drop before it turns the unit back on
so on the unit press menu 1 x and then enter,then up or down arrow to 900ppm and hit enter.then hit menu again 2x until s2 is flashing,hit enter,then press up arrow until unit reads 700,hit enter. now the unit will swing 350ppm up over 900ppm and 350 down below 900ppm.
Zone/deadband will go as high as 990set your deadband for a high number like 600 to 700(if thats possible) and your setpoint to 900. the deadband # is what allows drift or co2 to drop before it turns the unit back on
so on the unit press menu 1 x and then enter,then up or down arrow to 900ppm and hit enter.then hit menu again 2x until s2 is flashing,hit enter,then press up arrow until unit reads 700,hit enter. now the unit will swing 350ppm up over 900ppm and 350 down below 900ppm.
What if I set it 800/800?set your deadband for a high number like 600 to 700(if thats possible) and your setpoint to 900. the deadband # is what allows drift or co2 to drop before it turns the unit back on
so on the unit press menu 1 x and then enter,then up or down arrow to 900ppm and hit enter.then hit menu again 2x until s2 is flashing,hit enter,then press up arrow until unit reads 700,hit enter. now the unit will swing 350ppm up over 900ppm and 350 down below 900ppm.
It would roam between 400ppm and 1200ppm8 quart if
What if I set it 800/800?
Lights on will be in 3 hours and I'll see what my regular ppm is with no gas. I'm gonna want it to kick off at least a 100 before regular room ppm or its probably not gonna be able to drift all the way down to when it tells it self to kick on correctIt would roam between 400ppm and 1200ppm
Say regular room ppm is 600 but device drift to 550 before kick on, device would never kick on correct. I'm wanting a good drift to see if keeping steady at 1200ppm will make there intake lazy, and if a big drift will keep them not lazy when co2 kick on. I'm talking about the things they use to breathe co2. Don't know what it's calledWhy do you want that much drift?
What would be the setting for 1500 to 1200 ppm. Thanks for all your help! How can I configure these settings myself. Sorry all the questions im getting on my own nerves lolStoma,and plants are not like people.they don't like big swings,keep it consistent.the benefits of using co2 is explosive growth.keeping temps consistent at 82-85f and co2 1200-1500ppm will give you this.
Yes I would assume if you set it to turn on at 500 and the room sits at 600 it won't ever turn on
Finally figured it out, are you on lights off toThis is where I keep mine
View attachment 832897
Hit menu,then enter,then scroll up to 1300ppm,then hit enter.then hit menu 2 x,then enter,then scroll deadband number to 350ppm,then hit enter. Now it will hold ppm between about 1150 and 1475ppm
Or choose 1400 for ppm and 200 for deadband.will drift from 1300 to 1500
Half your deadband is how much it drifts above or below your set point, correct?This is where I keep mine
View attachment 832897
Hit menu,then enter,then scroll up to 1300ppm,then hit enter.then hit menu 2 x,then enter,then scroll deadband number to 350ppm,then hit enter. Now it will hold ppm between about 1150 and 1475ppm
Or choose 1400 for ppm and 200 for deadband.will drift from 1300 to 1500
No my controller is not in the same room as the plants:cool:Finally figured it out, are you on lights off to
YesHalf your deadband is how much it drifts above or below your set point, correct?
OK when lights on I'm gonna start my grow journal. This my first grow
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?