I
Iridebikes1
- Posts
- 17
- Reactions
- 25
- Joined
- Oct 20, 2023
- Points
- 13
What portions exactly will I want to trim out. This is my first go at this.Just keep them on a consistent 18/6 or 16/8.
They really should get right, then you can prune out the weirdness leter after it hits a proper veg cycle again.
Oh that’s going to be much later, but I’m referring to the unsightly single tipped leaves, the anomalous growth. Once the plant gets back on track, and new growth is proper, and it has had time to reinvigorate a bit. Nothing crazy…..Hey,
What portions exactly will I want to trim out. This is my first go at this.
So that was today, I opened the tent to refill the humidifier.What’s the big drop all about?View attachment 2061811
Gotcha.Oh that’s going to be much later, but I’m referring to the unsightly single tipped leaves, the anomalous growth. Once the plant gets back on track, and new growth is proper, and it has had time to reinvigorate a bit. Nothing crazy…..
On another note, I cut some clones about 2 weeks ago and they are hopefully rooting. Any advice for that scenario.Gotcha.
I use a different method for my cuttings, I use a hydro box. No dome. I’m sure one of the other farmers will pop by and have all the info you need! Good luck homie!!!On another note, I cut some clones about 2 weeks ago and they are hopefully rooting. Any advice for that scenario.
Hey, I just noticed these on my plant. Does it change what I do going forwardI use a different method for my cuttings, I use a hydro box. No dome. I’m sure one of the other farmers will pop by and have all the info you need! Good luck homie!!!
Hey, I just noticed these on my plant. Does it change what I do going forward
Yes there was some reports not too long ago of lights turning on even during the dark cycle I remember it was a large grow (full basement if I remember correctly) and one bank of lights was turning on and off repeatedly during the dark cycle regardless of timer settings, they had video of it happening, wish I could remember the brand, these are the reasons I keep a camera in each tent, so I can scroll through and verify light times etcHave you actually checked on them over the course of the full 18/6. The timer could be doing wacky things . Just because it is set to18/6 it may be turning off and on but it sure looks it flowered .
Thanks, yea a camera makes sense. At least I could confirm something glitchy like that. I believe i have a small wifi camera I could stick in there. I have thought of something since earlier today, i added a humidifier to the tent approximately 2 weeks ago. It has a lights off night time setting that darks out the display. There is a single small blue power light that stays on. I placed tape over that spot but if any light is leaking could that do it?Yes there was some reports not too long ago of lights turning on even during the dark cycle I remember it was a large grow (full basement if I remember correctly) and one bank of lights was turning on and off repeatedly during the dark cycle regardless of timer settings, they had video of it happening, these are the reasons I keep a camera in each tent, so I can scroll through and verify light times etc
It’s no doubt a reveg, something went wonky light wise the past week-2 to be seeing what we’re seeing here
I would think if it was close enough to a plant (within 6-12”) consistently that the branch it is closest to could possibly show some herm traits same as with night vision cameras mine uses 6, 940nm LED’s and have never had a problem even on branches it’s pointing directly atThanks, yea a camera makes sense. At least I could confirm something glitchy like that. I believe i have a small wifi camera I could stick in there. I have thought of something since earlier today, i added a humidifier to the tent approximately 2 weeks ago. It has a lights off night time setting that darks out the display. There is a single small blue power light that stays on. I placed tape over that spot but if any light is leaking could that do it?
The 2 week statement you first mentioned is what made me check the day I installed it and it was almost spot on 2 weeks. I the light is about 1 inch off the floor of the tent and is I would say 16 inches from the lowest branch. It's a dim light but I went ahead and did the gorilla tape and peaked in right when the cycle switched and I couldn't see it at all anymore. So.... if it was the issue I guess ill know if straightens out. I'll also stick the camera in there and see if I pick up any light malfunctions during the off cycle.I would think if it was close enough to a plant (within 6-12”) consistently that the branch it is closest to could possibly show some herm traits same as with night vision cameras mine uses 6, 940nm LED’s and have never had a problem even on branches it’s pointing directly at
Although it would depend on the intensity of the light coming from the humidifier. Some gorilla tape dims the lights in my tower fans etc enough that I’ve never had an issue so far
Edit: but the timing you’re describing does seem to be about right for what we’re seeing here as far as time wise
What’s
and the concurrent rise in humidity ?What’s the big drop all about?View attachment 2061811
the big drop all about?View attachment 2061811
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?