Slightly moldy buds

north knect · Oct 13, 2014

Hey folks..just curious if anybody has used slightly moldy buds for BHO or bubble hash?..I'm not goin to smoke them obviously but would the product b mold free and safe to smoke after BHO or hash?

Tango02 · Oct 13, 2014

What color is the mold??

Tango02 · Oct 13, 2014

The reason I ask is because if the mold is white then its just cob web mold which is cause simply by damp conditions. This mold can be killed with a mixture of H2O2 and H2O. Water and Hydrogen Peroxide...mixed 50 to 1. Mist the buds with this and let it dry over night. The mold should "dissolve"

Tango02 · Oct 13, 2014

If the mold has ANY color....and I mean ANY color at all...throw it away.

XTC · Oct 13, 2014

Have a read of this thread...

https://www.thcfarmer.com/community...cannabis-oil-to-remove-spores-botrytis.66384/

Sounds like there's no safe way around it..

north knect · Oct 13, 2014

Thanks for the input guys..yes it's white..almost looks like cobwebs also

caveman4.20 · Oct 13, 2014

Does anyone know about too much moisture fir too long turning green fresh bud Brown during the drying? Is this white fuzzy mold turning bud around it Brown because ive seen this everytime I've found that white fuzzy mold

kevinn · Oct 16, 2014

Tango02 said:
The reason I ask is because if the mold is white then its just cob web mold which is cause simply by damp conditions. This mold can be killed with a mixture of H2O2 and H2O. Water and Hydrogen Peroxide...mixed 50 to 1. Mist the buds with this and let it dry over night. The mold should "dissolve"

The H2O2 that I have from drug store is 3%. Should this be mixed at a ratio of 50:1.
Thanks

Tango02 · Oct 16, 2014

kevinn said:
The H2O2 that I have from drug store is 3%. Should this be mixed at a ratio of 50:1.
Thanks

No need to dilute a 3% solution. I would spray it as is.

LittleDabbie · Oct 16, 2014

If your gonna run moldy weed WHICH I HAVE DONE!!!! And consumed the bho from moldy weed.. You need to do a few things..

1. Run it...

2. Redissolve the bho into 195 proof ethanol ( de-wax at this point if you really wanna ) then....

3. Get a large syringe or multiple small ones.. I prefer 60CC there just huge.. Luer lock. Also get 0.02um pore size luer lock syringe filter.

4. First without the filter installed suck up as much liquid as you can fit in the syringes.

5. Attach filter/s to syringe/s an force liquid thru filter. This can be done multiple times with CLEAN NEW filters each time however i doubt it will take more then 1 pass thru per filter if your using 20cc or smaller... 60cc you may wanna make at least 2 passes with 2 filters.

Ive personally smoked over 40 grams of bho made from this processes. The weed i got was some doods harvest he fucked up the drying and the whole harvest went moldy.. You could smell the shit it was that bad... but the filtered bho while not the best tasting cause the weed was not cured... Had NO mold smell NO mold taste and gave me 0 sickness .. Also gave some to my caregiver for giving me the stash in the first place and he also smoked it with 0 health problems.

It can be done :D

LittleDabbie · Oct 16, 2014

caveman4.20 said:
Does anyone know about too much moisture fir too long turning green fresh bud Brown during the drying? Is this white fuzzy mold turning bud around it Brown because ive seen this everytime I've found that white fuzzy mold

That white fuzzy mold is due to a lack of Fresh air exchange its cob web mold THRIVES in low oxygen high humidity Environments As mentioned above a 3% h202 spray will cause your fuzzy mold to Fizzle and die off.

No harm to your plants because h202 breaks down into ~~carbon dioxide~~ Oxygen and water :D

kevinn · Oct 16, 2014

Tango02 said:
No need to dilute a 3% solution. I would spray it as is.

Thanks
That was what i was thinking.

Tango02 · Oct 16, 2014

LittleDabbie said:
That white fuzzy mold is due to a lack of Fresh air exchange its cob web mold THRIVES in low oxygen high humidity Environments As mentioned above a 3% h202 spray will cause your fuzzy mold to Fizzle and die off.

No harm to your plants because h202 breaks down into ~~carbon dioxide~~ Oxygen and water :D

100% correct, this is an old shrooming tech used to decontaminate colonizing substrate.

LittleDabbie · Oct 16, 2014

Tango02 said:
100% correct, this is an old shrooming tech used to decontaminate colonizing substrate.

Yep!!! LOL Thats how i first learned about molds :D Still learning about them actually lol Just had a nice yeast mold attack my substrate the other day :(

Tango02 · Oct 16, 2014

Mold can be a very dangerous thing, so be very sure about the color of it. I cant over state that enough....ANY color and it needs to be tossed.

I had a few tubs of substrate get contaminated with brown mold once...well me being young and stupid I cleaned it all up with no respiratory protection. Spores EVERYWHERE....in the air, on my hands, on my clothes. It nearly put me in the hospital. I had migraines for days, couldn't stop shivering no matter what the heat in the house was set on. Couldn't eat, hell I couldn't even get up out of bed for 2 days. It was the worst experience I have ever had and I rarely get sick and this completely shut me down in a matter of hours. So just be careful with mold.

LittleDabbie · Oct 16, 2014

Indeed ^^^ Solid advice! I personally have cans of lysol on hand.. gloves , masks.. BZK wipes / Iso pads... Im like prepared for fuckin ebola over here lol

Tango02 · Oct 16, 2014

Might actually need some Ebola protection before long if this shit in Dallas keeps spreading!!!

caveman4.20 · Oct 16, 2014

So I just tossed those branches and jars because it's not worth spraying and consuming but what about everything near it that dryd together but showed no naked eye signs ......I am afraid of looking under a strong microscope to see spores or growth

LittleDabbie · Oct 16, 2014

caveman4.20 said:
So I just tossed those branches and jars because it's not worth spraying and consuming but what about everything near it that dryd together but showed no naked eye signs ......I am afraid of looking under a strong microscope to see spores or growth

If it sporelated then there everywhere..

caveman4.20 · Oct 16, 2014

So how strong of a lens to check? If you have time...and don't mind? I'm talking about the white fuzzy stuff.....the brown I think came from too much moisture not enough air? I'm still healthy from what I can tell but if anything starts happening I am betting this would be a candidate of interest

Slightly moldy buds

Slightly moldy buds

north knect

Tango02

Tango02

Tango02

XTC

north knect

caveman4.20

kevinn

Tango02

LittleDabbie

LittleDabbie

kevinn

Tango02

LittleDabbie

Tango02

LittleDabbie

Tango02

caveman4.20

LittleDabbie

caveman4.20

Privacy & Transparency

Privacy & Transparency