Newbieleaf
- 42
- 18
I start my seedlings off in a Coco pot, then when big enough and the roots are growing through the little pot , I then just plant the whole thing in final pot. On the pic you can just see the small pot. These are royal gorilla, at 3 weeks, from the same company as your using.Well after the poor yield from the 1st run due to incorrect techniques.
The extractor fan Failure on the 2nd grow.
Time for a 3rd small grow.
Seeds used are gorilla auto & auto Jack herer
The 2 seeds gemanated in around 24hrs using paper towels and 2 plates method, using a DIY heating pad attached to a thermo electric relay switch set at 23c and that kept the temperature between the plates around 21-22c
View attachment 934489View attachment 934490
While these were germinating and doing there thing I rinsed the coco with tap water and mixed in the perlite to a 30/70 ratio then flushed 3ltrs of a&b 1ml & 3ml rhizotonic per litre through both pots at a ec of 998.
Base tap water comes out between 70-120ppm
Lighting, 150w blue CFL
Tent size W50xL50xH60cm I think it was will have to re-measure but its around that size.
Intake and out take both have pc fans attached
I've planted in the final pot size and have been spot watering when the tops look dry in the centre
Now seeds have sprouted but one's with a problem and looks like roots are coming out the leavesView attachment 934491
And here they are in there full glory View attachment 934492
Go smaller pots next time ......Nice something to bench mark for, I just thought it was popular belief to go straight to final pot to avoid transplant stress, will keep in mind for next time if I make it threw this one and try small pot with 90% of the plastic cut away and placed inside another pot till ready for big pot.
Thanks.
They still have them white tips on them. You can just about see at the tipOh yea , i recognize your "el diablo" devil horn seedlings
I keep telling everyone to offer pics in natural white light , it would be eaiser for others to offer help if they can see the plants in natural light , seriously.....
I have been growing autos 9 years continually a tip, when running autos run one strain at a time, this will make life much easyer bc different strains grow at different rates, if you have tall plants u will have to raise light the smaller strains will suffer for it, just a bit of advice to make life better. Good Luck.
import RPi.GPIO as GPIO
import time
channel = 21
# GPIO setup GPIO.setmode(GPIO.BCM)
GPIO.setup(channel, GPIO.OUT)
def motor_on(pin):
GPIO.output(pin, GPIO.HIGH) #Turn mo$
def motor_off(pin): GPIO.output(pin, GPIO.LOW) # Turn mo$
if __name__ == '__main__':
try:
motor_on(channel)
time.sleep(2)
motor_off(channel)
time.sleep(1)
GPIO.cleanup()
except KeyboardInterrupt:
GPIO.cleanup()
exit()
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?