• Home
  • Forums
  • Medical Cannabis Cultivation
  • Growroom Design & Setup
  • L.E.D Grow Lights
  • The new grow light finally arrived, unpackaging.

The new grow light finally arrived, unpackaging.

  • Thread starter Thread starter Frankster
  • Start date Start date Oct 11, 2020
  • Tagged users Tagged users None

The new grow light finally arrived, unpackaging.

Frankster Oct 11, 2020 5 Replies 2,103 Views
Page 1 of 1 · Replies 1–6 of 6
1

Frankster

Supporter
Never trust a doctor who's plants have died.
Posts
5,188
Reactions
16,483
Joined
May 26, 2020
Points
313
Oct 11, 2020
#1
Use the famous Samsung LM301H
3 YEAR WARRANTY

ATHENA PLUS 8 SAMSUNG SYD SPECTRUM SERIES
Test Condition
Temprature : 25.3Deg RH : 65.0%
WL Range : 350nm-1100nm IP : 29826 (46%)
Test Mode : Fast Test T : 27 ms
Sensitivity : High
Colorimetric Parameters
Chromaticity Coordinate: x = 0.3545 y = 0.3315 / u' = 0.2262 v' = 0.4759 (duv=-1.43e-02) Dx,Dy:-0.0055,-0.0315
CCT= 4523K Prcp
WL: Ld=623.3nm
Purity=5.8%
Peak WL: Lp=449nm
Ratio:R=19.4% G=75.9% B=4.7%
Render Index: Ra = 94.3
AvgR = 93.6
TM30:Rf=86 Rg=106
R1 =97 R2 =96 R3 =91 R4 =93 R5 =98 R6 =91 R7 =93
R8 =95 R9 =97 R10=89 R11=93 R12=85 R13=96 R14=94 R15=96

Photometric & Radiometric Parameters
Flux = 74928 lm Eff. : 112.77
lm/W Fe = 286.45 W
Flux of emitted photons(μmol/s):1333.5 Fluo. and blue light ratio:3.170 Fluorescent eff.:326.0
B: 2.8646e+005mW
Photons1:1.340e+003 μmol/s(350~1000nm) Photons2:1.043e+003 μmol/s(500~1000nm)
Photosynthetic:PPF(400-730nm):1287.9μmol/s PRF(400-730nm):2.7629e+005mW
Eff(PPF) (400-730nm):1.94μmol/s/W
Spectrum
6500K
3500k
660NM
730NM

Model Athena Plus 8
Actual Power Draw +/- 660W
Dimensions 120 x 117 x 10.5cm
LED Qty 1920X 0.5W
PPF 1.94umol/s
Input Voltage AC100-277V
Working Frequency 50~60Hz
Working Environment 45%~90%RH -20~40℃
Lifespan 50000 hours
Footprint 4' x 4' for bloom 5' x 5' for veg
HID Equivalent 1000W HPS
Wavelength 410-730nm
N.W +/- 18 KG
 

Attachments

  • the-new-grow-light-finally-arrived-unpackaging.jpg
    526.2 KB · Views: 189
  • the-new-grow-light-finally-arrived-unpackaging-2.jpg
    317.1 KB · Views: 170
  • the-new-grow-light-finally-arrived-unpackaging-3.jpg
    315.4 KB · Views: 174
  • the-new-grow-light-finally-arrived-unpackaging-4.jpg
    518.6 KB · Views: 166
  • the-new-grow-light-finally-arrived-unpackaging-5.jpg
    568.8 KB · Views: 166
  • the-new-grow-light-finally-arrived-unpackaging-6.jpg
    236.4 KB · Views: 163
  • the-new-grow-light-finally-arrived-unpackaging-7.jpg
    237.7 KB · Views: 173
  • the-new-grow-light-finally-arrived-unpackaging-8.jpg
    322.7 KB · Views: 169
Reactions: HipsterDoodus, Moshmen and BabyFarmer
Quote Reply

Frankster

Supporter
Never trust a doctor who's plants have died.
Posts
5,188
Reactions
16,483
Joined
May 26, 2020
Points
313
Oct 11, 2020
#2
Also comes with a timer and a remote, haven't figured out all that so far, but seems pretty nice. Moved the x2 321 watt's (LM301H 3500K 660 nm IR) into the flowering room.

I've still got the 20 strips of samsung LM301H sunboards that I'm going to integrate into everything as I get all the materials and switches assembled. I've got some aluminum angle iron, heatsinks, aluminum cookie sheet's and heatsink paste, 16 awg solid core wire. Need to still get some molex connectors and maybe some dials for those units, I'm going to make them tiny and thin, so they can be hung in adhoc, or put on the side for late stage finishing.

I think overall this is going to hugely impact my yields per sq foot, as I've got way, way more ppf than before, also running much more efficiently too boot, Or possibly some sort of side rig's that help increase vertical growth.

What might be really cool would be to triangulate 3 of them, with angle aluminum, then put fans at both ends, and lower them into the fauna vertically. Regardless, I want to create different angles of attack, so I can get under the canopy better.
 

Attachments

  • IMG_20201010_222319.jpg
    508.7 KB · Views: 159
Reactions: HipsterDoodus, MIMedGrower and Moshmen
Quote Reply

sambapati

Posts
2,174
Reactions
4,657
Joined
May 1, 2020
Points
263
Oct 11, 2020
#3
Frankster said:
Also comes with a timer and a remote, haven't figured out all that so far, but seems pretty nice. Moved the x2 321 watt's (LM301H 3500K 660 nm IR) into the flowering room.

I've still got the 20 strips of samsung LM301H sunboards that I'm going to integrate into everything as I get all the materials and switches assembled. I've got some aluminum angle iron, heatsinks, aluminum cookie sheet's and heatsink paste, 16 awg solid core wire. Need to still get some molex connectors and maybe some dials for those units, I'm going to make them tiny and thin, so they can be hung in adhoc, or put on the side for late stage finishing.

I think overall this is going to hugely impact my yields per sq foot, as I've got way, way more ppf than before, also running much more efficiently too boot, Or possibly some sort of side rig's that help increase vertical growth.

What might be really cool would be to triangulate 3 of them, with angle aluminum, then put fans at both ends, and lower them into the fauna vertically. Regardless, I want to create different angles of attack, so I can get under the canopy better.
Click to expand...
Its gonna be a bright bright sunshiney day
 
Reactions: HipsterDoodus, Rooke, Moshmen and 2 others
Quote Reply

Frankster

Supporter
Never trust a doctor who's plants have died.
Posts
5,188
Reactions
16,483
Joined
May 26, 2020
Points
313
Oct 11, 2020
#4
sambapati said:
Its gonna be a bright bright sunshiney day
Click to expand...
I'm so besides myself right now. This was a really good move on my part, I was fortunate to have the funding to do it, and I'm glad I did.

This is going to produce UGE results, to quote a very big idiot. 321w+321w (in the small room) + 650w outside, plus the heat from the 2 fans and dehumid is enough to heat my entire house in the wintertime, and not a single watt is going to wasteful heat energy, it's all getting used, refrigerator, ice machine, TV, computers, Lights, everything has a function beyond it's "heating" components.

I probably need to do a little CO2 inside possibly, and if I keep a close eye on it (or have a monitor) I can probably accelerate transpiration even more, during the coolest days of the winter months. But just us 2 breathing in here probably will get it above 800ppm, if everything is shut.
 
Last edited: Oct 11, 2020
Reactions: HipsterDoodus, Muttley, sambapati and 2 others
Quote Reply

Muttley

Posts
66
Reactions
71
Joined
Jul 24, 2020
Points
18
Oct 18, 2020
#5
Uge results, and by the way more amazingly beautiful than anything the world has ever seen, folks. I am talking absolutely massive, like my hands, and my hair, which by they way Nancy wishes she could touch, but I won't let her. What do you think ? Do the American people want Nancy touching my toupee ? Nah, I didn't think so, and oh, I almost forgot, how about them Wall street figures ?

Ahem, sorry about that. Where am I, and who are all these people dressed in white coats ? Hey ! Don't you touch me with that syringe ! Keep your hands off me, or I'll be forced to AAAAAaaaaargh No no no nooooo!
 
Reactions: sambapati
Quote Reply

sambapati

Posts
2,174
Reactions
4,657
Joined
May 1, 2020
Points
263
Oct 18, 2020
#6
Muttley said:
Uge results, and by the way more amazingly beautiful than anything the world has ever seen, folks. I am talking absolutely massive, like my hands, and my hair, which by they way Nancy wishes she could touch, but I won't let her. What do you think ? Do the American people want Nancy touching my toupee ? Nah, I didn't think so, and oh, I almost forgot, how about them Wall street figures ?

Ahem, sorry about that. Where am I, and who are all these people dressed in white coats ? Hey ! Don't you touch me with that syringe ! Keep your hands off me, or I'll be forced to AAAAAaaaaargh No no no nooooo!
Click to expand...
They're coming to take you away haha he he to the phunny pharm and you'll be happy there.
 
Reactions: Muttley and Rooke
Quote Reply
Page 1 of 1 · Replies 1–6 of 6
1

Thread info

Replies 5
Views 2,103
Started Oct 11, 2020
Latest post Oct 18, 2020
Starter Frankster
Forum L.E.D Grow Lights

Latest posts

  • Cpurola's Outdoor grow in Southeast Michigan 2026
    • Latest: cpurola
    • 45 minutes ago
    General Outdoor Growing
  • 2026 Outdoor Grows! let's see em!
    • Latest: durbin92810
    • Today at 5:55 AM
    General Outdoor Growing
  • Cap junky seeds from seed junky
    • Latest: Clearbluesky
    • Today at 4:52 AM
    General Indoor Growing
  • Wins, Royal Cherries 🍒 Organic Grow.
    • Latest: WinJr63
    • Today at 4:30 AM
    Grow Diaries
  • D
    What do you make of these purple marks on my seedlings
    • Latest: Dankster47
    • Today at 1:54 AM
    General Indoor Growing
  • Home
  • Forums
  • Medical Cannabis Cultivation
  • Growroom Design & Setup
  • L.E.D Grow Lights
  • The new grow light finally arrived, unpackaging.
  • Contact us
  • Terms and rules
  • Privacy policy
  • Help
  • Home
Community platform by XenForo® © 2010-2026 XenForo Ltd.
Menu
Log in

Sign up

  • Home
  • News
  • Classifieds
  • Forums
    • What's new Featured content New posts New Articles New articles New products Latest activity
  • Social
  • Strains
  • Live
  • Learn
  • Brands
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?