Diy Flowering Box

[Boomshankar]

Hello guys i have a 3wide 2 deep 5tall grow box which I want to use for seedlings clones and early veg. Now i want to build a flowering box at my place, i will be bulding it my self with some help. I want to build it in ply wood sheets.please share your thoughts

 

[Boomshankar]

A

Hello guys i have a 3wide 2 deep 5tall grow box which I want to use for seedlings clones and early veg. Now i want to build a flowering box at my place, i will be bulding it my self with some help. I want to build it in ply wood sheets.please share your thoughts

Are there any specification for the place of exhaust and fresh air intake?

 

[Boomshankar]

Generally it's said that hot air goes up, so i am thinking to put the exhaust on the upper part of the box. On both the sides

 

[Westie]

Check out this Farmer P thread.
https://www.thcfarmer.com/community/threads/diy-cabinet-from-recycled-wood-coco-grow.86155/

 

[kansabis]

Typically exhaust up top and intake down low,make sure its light tight and you have your temps and humidity where they need to be and you should be ready to rock n roll

 

[Boomshankar]

Typically exhaust up top and intake down low,make sure its light tight and you have your temps and humidity where they need to be and you should be ready to rock n roll

Ok will upload pic as i start working on it in couple of days.

 

[Boomshankar]

I have decided the specification of the flower box

 

[Boomshankar]

A 3×3×7 box

 

[Boomshankar]

Completed three sides.

 

[Boomshankar]

This is the frame 3inch wide 19mm thick and 6mm ply on both sides.

 

[Boomshankar]

 

[Boomshankar]

Boss help me out here, I am planning to do a 6inch exhaust, and three fresh air intake in the bottom at different sides and different height

 

[chemistry]

Boss help me out here, I am planning to do a 6inch exhaust, and three fresh air intake in the bottom at different sides and different height

My flower space is around the same size as yours, and I have a 4 inch extractor fan, in your space it would be enough. Have a look at the specs for your fan and see how many times it can turn the air over in your sized space.

 

[Boomshankar]

My flower space is around the same size as yours, and I have a 4 inch extractor fan, in your space it would be enough. Have a look at the specs for your fan and see how many times it can turn the air over in your sized space.

Out here in summers which is about to start the temps reach a around 48c. My air intake will be from inside of the house around 27c max. I want more flow of air that is what I miss in the small box

 

[Boomshankar]

Two 4inch exhaust on the left and right when facing the box. And 3 intake vents 2 inch

 

[Boomshankar]

@incogneato any advice for the grow box?

 

[Boomshankar]

Dimensions changed a bit. Now its a 4x3x7
4'wide 3'deep 7'tall

 

[incogneato]

Dimensions changed a bit. Now its a 4x3x7
4'wide 3'deep 7'tall

We talking feet? Good size. Whats your plans for the door?

 

[Boomshankar]

We talking feet? Good size. Whats your plans for the door?

Yes sir ft' two doors on pevot openable in and out. 1.5 ft each

 

[incogneato]

Yes sir ft' two doors on pevot openable in and out. 1.5 ft each

Just keep in mind thats where most light leaks happen. I had to rework my door a few times to get rid of leaks. I would suggest making the opening a little bigger. You dont want to be tending to your plants through a small opening. Make it easy to access if you can.