Council Of First Knowledge, Jedi Temple Training Facility

[EventHorizan]

Lmao, my first system was a cheap aero. It's cool but the spray heads get clogged alot.

Isn't that pretty much what them cloners are, that I see advertised? Look like they are sticking the stem thru some kind of Styrofoam until the end if the stem is all the way thru and under the lid where it is sprayed with aero solution...

 

[Midwestjay]

Isn't that pretty much what them cloners are, that I see advertised? Look like they are sticking the stem thru some kind of Styrofoam until the end if the stem is all the way thru and under the lid where it is sprayed with aero solution...

Yea pretty much. Mine was in 5gal buckets. 6 site with a res.

 

[Wisher619]

so .........you don't really need to rinse out or leach out anything from the media before putting it in the flood table
the down curling will probably never get fixed for those leaves....N toxicity...but better feed program will help with the newer leaves
also ...I have a easy solution for you ...for light leaks.....
heavy black garbage bags and duct tape
make a skirt around the pvc stand
when you want to get to the resi....lift the skirt....
so the water should drain back down....does it have to do with the pump I wonder
well you only spent 5 bucks...so....i think a 185gph pump from the hydro store is like 10 bucks...should drain back

 

[Midwestjay]

I had to run 4 buckets cause 6 was to many for the tent, about 700g hanging there. The were 3 rows like that.

 

[Midwestjay]

so .........you don't really need to rinse out or leach out anything from the media before putting it in the flood table
the down curling will probably never get fixed for those leaves....N toxicity...but better feed program will help with the newer leaves
also ...I have a easy solution for you ...for light leaks.....
heavy black garbage bags and duct tape
make a skirt around the pvc stand
when you want to get to the resi....lift the skirt....
so the water should drain back down....does it have to do with the pump I wonder
well you only spent 5 bucks...so....i think a 185gph pump from the hydro store is like 10 bucks...should drain back

It should drain back not sure why it's not.

 

[Wisher619]

yeah that defies the laws of physics

 

[Midwestjay]

Well he is experimenting with anti gravity

 

[Wisher619]

the dopest aeroponics system is the fog-ponics where there is a special hydro fogger that fills the basin with nutrient fog constantly......the condensation builds and drips back down into the res...pretty damn sweet

 

[Midwestjay]

I wish I had my camera that got stolen. I had so many videos and pictures of my set up in Kc. That cheap aero produced like a mf

 

[Midwestjay]

the dopest aeroponics system is the fog-ponics where there is a special hydro fogger that fills the basin with nutrient fog constantly......the condensation builds and drips back down into the res...pretty damn sweet

Yea I've seen those. But heard the lil foggers don't work well with the nutes they clog or burn up or somehingi. But it was years ago when saw that. It was a weird lil thing that made the fog

 

[Wisher619]

I bet....super efficient but clogging is a problem...you have to run an inline filter

 

[Midwestjay]

Yea I ended up running a rainbird filter in my aero, but they would still clog over time. Honestly if I could make the manifold for the water lines I'd build another. No hand watering in the beginning and able to run a lot less water.

 

[Midwestjay]

My only issue was if you pinched/kinked a water return line it would pump the whole 15-30 gal into that one bucket.

 

[Wisher619]

Now hell this ain't my thread... That doesn't mean nothing to me.. I like that we discuss shit. And everything that somebody else is trying or has tryed, is worth reading about... As far as I figure that is how we learn...

Well getting my table built :) I need to tape my res black, and get some t"s to sturdy up my legs with some bars on the sides,,, then its ready!

for the pump side of the inlet...take that filter off so the pump side is flat against the bottom of the basin.....

 

[EventHorizan]

So you think I can make a reg veg solution around 500 ppm and run my photo with my autos in the table?

 

[Wisher619]

So you think I can make a reg veg solution around 500 ppm and run my photo with my autos in the table?

yes sir
but I wouldn't make a veg solution....honestly...not trying to push you but...I would just run a 50% strength lucas solution
just because it has been used and proven to be successful
it has ben mathematically evaluated for the correct ratio per element for our plants

 

[EventHorizan]

for the pump side of the inlet...take that filter off so the pump side is flat against the bottom of the basin.....

It is a pump with an inlet and an outlet, both happen to be on the top of the pump so you need about 2 gallon in there just so it will pump water. And it says to never let it run dry. I figures I would make me a fitting that elbows back down to the bottom. Another trip to the hardware store.

Guy at True Value ask me what I was working on. I said bud, mind your own damn business for I go get Ricky and Julian out the car... You don't want that. Ricky ain't right,,,,,, :)

 

[Wisher619]

hahahahaha
so check this out.......
instead of rigging anything......

and just hold off until it arrives....
you have been living without it up until now...can wait a few more days
but you never want to run any pump dry...it will kill it
but yeah let me see a pic of the pump will ya

 

[EventHorizan]

yes sir
but I wouldn't make a veg solution....honestly...not trying to push you but...I would just run a 50% strength lucas solution
just because it has been used and proven to be successful
it has ben mathematically evaluated for the correct ratio per element for our plants

Then save me from having to go look it up, and tell me how many ml of each for 5 gallon. And I promise I will go read about it later :)

 

[EventHorizan]

hahahahaha
so check this out.......
instead of rigging anything......

and just hold off until it arrives....
you have been living without it up until now...can wait a few more days
but you never want to run any pump dry...it will kill it
but yeah let me see a pic of the pump will ya